journal article·2021-09Open access

Microstructure and Texture Evolution During Cold Rolling of 316L Stainless Steel

Chunlei Zhang, Dorte Juul Jensen, Tianbo Yu

Abstract

The evolution of the deformation microstructure and the local crystallographic orientations are investigated for 10, 30, 50, and 80 pct cold rolled 316L austenitic stainless steel strips and the results are related to the overall macro-texture evolution. The microstructures are characterized by scanning electron microscopy (SEM), including electron backscatter diffraction (EBSD), and transmission electron microscopy (TEM). The macro-textures are characterized by X-ray diffraction (XRD) measurements. It is found that the deformation leads to both slip and twinning followed by martensite transformation and shear banding. The deformation twinning occurs on planes with the highest twinning Schmid factors and shows a strong orientation dependence, in the sense deformation twinning occurs preferentially in grains with near Copper orientation rather than Brass orientation. It is furthermore found that the formation of both deformation twins and shear bands have a significant effect on the texture evolution. The correlations between microstructure, local crystallographic orientations and macro-textures are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. B. Weiss and R. Stickler: Metall. Mater. Trans. B., 1972, vol. 3B, pp. 851–66.10.1007/BF02647659 ↗
2. Y. Xiong, Y. Yue, Y. Lu, T. He, M. Fan, F. Ren, and W. Cao: Mater. Sci. Eng. A., 2018, vol. 709, pp. 270–76. .10.1016/j.msea.2017.10.067 ↗
3. S. Kheiri, H. Mirzadeh, and M. Naghizadeh: Mater. Sci. Eng. A., 2019, vol. 759, pp. 90–96. .10.1016/j.msea.2019.05.028 ↗
4. F.K. Yan, N.R. Tao, and K. Lu: Scr. Mater., 2014, vol. 84–85, pp. 31–34. .10.1016/j.scriptamat.2014.04.008 ↗
5. J. Li, Y. Cao, B. Gao, Y. Li, and Y. Zhu: J. Mater. Sci., 2018, vol. 53, pp. 10442–56. .10.1007/s10853-018-2322-4 ↗
6. T. Leffers: in Deformation of Polycrystals: Mechanisms and Microstructures, Proc. 2nd Risø Int. Symp., N.Hansen, A. Horsewell, T. Leffers, H. Lilholt, eds., Risø National Laboratory, Roskilde, Denmark, 1981, pp. 55–71.
7. D. Juul Jensen, A.W. Thompson, and N. Hansen: Metall. Trans. A., 1989, vol. 20, pp. 2803–10. .10.1007/BF02670172 ↗
8. J. Hirsch and K. Lücke: Acta Metall., 1988, vol. 36, pp. 2883–904. .10.1016/0001-6160(88)90173-3 ↗
9. Q. Liu, C. Maurice, J. Driver, and N. Hansen: Metall. Mater. Trans. A., 1998, vol. 29A, pp. 2333–44. .10.1007/s11661-998-0110-5 ↗
10. W.Q. Cao, A. Godfrey, and Q. Liu: Mater. Sci. Eng. A., 2003, vol. 361, pp. 9–14. .10.1016/S0921-5093(03)00055-8 ↗
11. J. Gil Sevillano, P. van Houtte, and E. Aernoudt: Prog. Mater. Sci., 1980, vol. 25, pp. 69–134. .10.1016/0079-6425(80)90001-8 ↗
12. S. Roy, D. Satyaveer Singh, S. Suwas, S. Kumar, and K. Chattopadhyay: Mater. Sci. Eng. A., 2011, vol. 528, pp. 8469–78. .10.1016/j.msea.2011.07.042 ↗
13. L. Remy: Acta Metall., 1978, vol. 26, pp. 443–51. .10.1016/0001-6160(78)90170-0 ↗
14. M. Naghizadeh and H. Mirzadeh: Metall. Mater. Trans. A., 2018, vol. 49A, pp. 2248–56. .10.1007/s11661-018-4583-6 ↗
15. Y.F. Shen, X.X. Li, X. Sun, Y.D. Wang, and L. Zuo: Mater. Sci. Eng. A., 2012, vol. 552, pp. 514–22. .10.1016/j.msea.2012.05.080 ↗
16. M.J. Sohrabi, M. Naghizadeh, and H. Mirzadeh: Arch. Civ. Mech. Eng., 2020, vol. 20, p. 20. .10.1007/s43452-020-00030-4 ↗
17. F.D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud, and T. Antretter: Int. J. Plast., 2000, vol. 16, pp. 723–48. .10.1016/S0749-6419(99)00078-9 ↗
18. D. Barbier, N. Gey, S. Allain, N. Bozzolo, and M. Humbert: Mater. Sci. Eng. A., 2009, vol. 500, pp. 196–206. .10.1016/j.msea.2008.09.031 ↗
19. L. Bracke, K. Verbeken, L. Kestens, and J. Penning: Acta Mater., 2009, vol. 57, pp. 1512–24. .10.1016/j.actamat.2008.11.036 ↗
20. E. Jimenez-Melero, N.H. van Dijk, L. Zhao, J. Sietsma, J.P. Wright, and S. van der Zwaag: Mater. Sci. Eng. A., 2011, vol. 528, pp. 6407–16. .10.1016/j.msea.2011.04.087 ↗
21. J. Hirsch, K. Lücke, and M. Hatherly: Acta Metall., 1988, vol. 36, pp. 2905–27. .10.1016/0001-6160(88)90174-5 ↗
22. S. Vercammen, B. Blanpain, B.C. De Cooman, and P. Wollants: Acta Mater., 2004, vol. 52, pp. 2005–12. .10.1016/j.actamat.2003.12.040 ↗
23. S.G. Chowdhury, S. Das, and P.K. De: Acta Mater., 2005, vol. 53, pp. 3951–9. .10.1016/j.actamat.2005.05.006 ↗
24. M. Odnobokova, A. Belyakov, and R. Kaibyshev: Adv. Eng. Mater., 2015, vol. 17, pp. 1812–20. .10.1002/adem.201500100 ↗
25. G. Christiansen, J.R. Bowen, and J. Lindbo: Mater. Charact., 2002, vol. 49, pp. 331–5. .10.1016/S1044-5803(03)00032-9 ↗
26. H.J. Bunge: Texture Analysis in Materials Science: Mathematical Methods. Butterworths, London, 1982.
27. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63–8. .10.4028/www.scientific.net/SSP.160.63 ↗
28. D.A. Hughes and N. Hansen: Metall. Trans. A., 1993, vol. 24, pp. 2022–37. .10.1007/BF02666337 ↗
29. G. Kurdjumow and G. Sachs: Z. Phys., 1930, vol. 18, p. 534. .
30. G. Monnet and M.A. Pouchon: Mater. Lett., 2013, vol. 98, pp. 128–30. .10.1016/j.matlet.2013.01.118 ↗
31. D. Molnár, X. Sun, S. Lu, W. Li, G. Engberg, and L. Vitos: Mater. Sci. Eng. A., 2019, vol. 759, pp. 490–7. .10.1016/j.msea.2019.05.079 ↗
32. J.T. Busby, M.C. Hash, and G.S. Was: J. Nucl. Mater., 2005, vol. 336, pp. 267–78. .10.1016/j.jnucmat.2004.09.024 ↗
33. D. Kuhlmann-Wilsdorf: Mater. Sci. Eng. A., 1989, vol. 113, pp. 1–41. .10.1016/0921-5093(89)90290-6 ↗
34. D.A. Hughes: Acta Metall. Mater., 1993, vol. 41, pp. 1421–30. .10.1016/0956-7151(93)90251-M ↗
35. X. Huang and G. Winther: Philos. Mag., 2007, vol. 87, pp. 5189–214. .10.1080/14786430701652851 ↗
36. D. Kuhlmann-Wilsdorf and N. Hansen: Scr. Metall. Mater., 1991, vol. 25, pp. 1557–62. .10.1016/0956-716X(91)90451-6 ↗
37. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–25. .
38. G. Wassermann: Z. Met., 1963, vol. 54, p. 61. .
39. T. Leffers and R.K. Ray: Prog. Mater. Sci., 2009, vol. 54, pp. 351–96. .10.1016/j.pmatsci.2008.09.002 ↗
40. B.J. Duggan, M. Hatherly, W.B. Hutchinson, and P.T. Wakefield: Met. Sci., 1978, vol. 12, pp. 343–51. .10.1179/030634578790433909 ↗
41. E. El-Danaf, S.R. Kalidindi, R.D. Doherty, and C. Necker: Acta Mater., 2000, vol. 48, pp. 2665–73. .10.1016/S1359-6454(00)00050-1 ↗
42. C. Donadille, R. Valle, P. Dervin, and R. Penelle: Acta Metall., 1989, vol. 37, pp. 1547–71. .10.1016/0001-6160(89)90123-5 ↗
43. Y. Lü, B. Hutchinson, D.A. Molodov, and G. Gottstein: Acta Mater., 2010, vol. 58, pp. 3079–90. .10.1016/j.actamat.2010.01.045 ↗
44. R. Kumar, B. Mahato, N.R. Bandyopadhyay, and D.K. Bhattacharya: Mater. Sci. Eng. A., 2005, vol. 394, pp. 296–301. .10.1016/j.msea.2004.11.057 ↗
45. H. Paul, A. Morawiec, E. Bouzy, J.J. Fundenberger, A. Piatkowski: Metall. Mater. Trans. A 2004, vol. 35, pp. 3775–86.10.1007/s11661-004-0283-5 ↗
46. J.R. Luo, A. Godfrey, W. Liu, and Q. Liu: Acta Mater., 2012, vol. 60, pp. 1986–98. .10.1016/j.actamat.2011.12.017 ↗
47. S. Sinha, J.A. Szpunar, N.A.P. Kiran Kumar, and N.P. Gurao: Mater. Sci. Eng. A., 2015, vol. 637, pp. 48–55. .10.1016/j.msea.2015.04.005 ↗
48. J.W. Christian and S. Mahajan: Prog. Mater. Sci., 1995, vol. 39, pp. 1–157. .10.1016/0079-6425(94)00007-7 ↗
49. S.S. Cai, X.W. Li, and N.R. Tao: J. Mater. Sci. Technol., 2018, vol. 34, pp. 1364–70. .10.1016/j.jmst.2017.10.004 ↗
50. G.Y. Chin, W.F. Hosford, and D.R. Mendorf: Proc Math. Phys. Eng. Sci., 1969, vol. 309, pp. 433–56. .
51. T.S. Byun: Acta Mater., 2003, vol. 51, pp. 3063–71. .10.1016/S1359-6454(03)00117-4 ↗
52. J.A. Venables: Philos. Mag., 1961, vol. 6, pp. 379–96. .10.1080/14786436108235892 ↗