journal article·2018-12Open access

The Effect of Rhenium Addition on Microstructure and Corrosion Resistance of Inconel 718 Processed by Selective Laser Melting

Kamil Majchrowicz, Zbigniew Pakieła, Janusz Kamiński, Magdalena Płocińska, Tomasz Kurzynowski, Edward Chlebus

Abstract

Abstract In this study, the effect of rhenium addition (2, 4, and 6 wt pct) and building orientation (0 and 90 deg) on the microstructure and corrosion resistance of Inconel 718 (IN718) alloy processed by selective laser melting (SLM) was investigated. Microstructure characterization showed that the as-built IN718-Re alloys consist of columnar grains growing parallel to the building direction (Z-axis). Each columnar grain was characterized by a fine columnar/cellular dendritic substructure with Nb- and Mo-rich Laves phases and MC-type carbides embedded in the interdendritic spaces. Rhenium addition segregated to γ phase dendrites which resulted in an increase of the columnar/cellular substructures width with increasing Re content. Due to a strong microstructure anisotropy of SLM-processed IN718-Re alloys, the corrosion properties were examined for mutually perpendicular planes: XY (90 deg samples) and XZ (0 deg). The presence of rhenium enhanced the corrosion resistance of IN718 alloy in 0.1 M Na2SO4and NaCl solutions at both exposed planes. The corrosion current density was significantly reduced for IN718-Re alloys and increasing Re content correlated with a more positive shift in corrosion potential. Moreover, the XY plane possessed better corrosion resistance than the XZ plane due to the higher fraction of laser overlapping areas observed for the XZ plane.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. X. Wu: Mater. Sci. Technol., 2007, vol. 23, pp. 631–40.10.1179/174328407X179593 ↗
2. K. Osakada and M. Shiomi: Int. J. Mach. Tools Manuf., 2006, vol. 46, pp. 1188–93.10.1016/j.ijmachtools.2006.01.024 ↗
3. J.-P. Kruth, G. Levy, F. Klocke, and T.H.C. Childs: CIRP Ann. Manuf. Technol., 2007, vol. 56, pp. 730–59.10.1016/j.cirp.2007.10.004 ↗
4. T. Kurzynowski, E. Chlebus, B. Kuźnicka, and J. Reiner: Proc. SPIE 8239, High Power Laser Mater. Process. Lasers, Beam Deliv. Diagnostics, Appl., 2012, p. 823914.
5. G.N. Levy, R. Schindel, and J.P. Kruth: CIRP Ann. - Manuf. Technol., 2003, vol. 52, pp. 589–609.10.1016/S0007-8506(07)60206-6 ↗
6. E. Chlebus, K. Gruber, B. Kuźnicka, J. Kurzac, and T. Kurzynowski: Mater. Sci. Eng. A, 2015, vol. 639, pp. 647–55.10.1016/j.msea.2015.05.035 ↗
7. J. Choi, G. Shin, S. Yang, D. Yang, J. Lee, M. Brochu, and J.-H. Yu: Powder Technol., 2017, vol. 310, pp. 60–66.10.1016/j.powtec.2017.01.030 ↗
8. W.M. Tucho, P. Cuvillier, A. Sjolyst-Kverneland, and V. Hansen: Mater. Sci. Eng. A, 2017, vol. 689, pp. 220–32.10.1016/j.msea.2017.02.062 ↗
9. D. Zhang, W. Niu, X. Cao, and Z. Liu: Mater. Sci. Eng. A, 2015, vol. 644, pp. 32–40.10.1016/j.msea.2015.06.021 ↗
10. T. Brynk, Z. Pakiela, K. Ludwichowska, B. Romelczyk, R.M. Molak, M. Plocinska, J. Kurzac, T. Kurzynowski, and E. Chlebus: Mater. Sci. Eng. A, 2017, vol. 698, pp. 289–301.10.1016/j.msea.2017.05.052 ↗
11. K.N. Amato, S.M. Gaytan, L.E. Murr, E. Martinez, P.W. Shindo, J. Hernandez, S. Collins, and F. Medina: Acta Mater., 2012, vol. 60, pp. 2229–39.10.1016/j.actamat.2011.12.032 ↗
12. Z. Wang, K. Guan, M. Gao, X. Li, X. Chen, and X. Zeng: J. Alloys Compd., 2012, vol. 513, pp. 518–23.10.1016/j.jallcom.2011.10.107 ↗
13. N. Nadammal, S. Cabeza, T. Mishurova, T. Thiede, A. Kromm, C. Seyfert, L. Farahbod, C. Haberland, J. Schneider, P. Portella, and G. Bruno: Mater. Des., 2017, vol. 134, pp. 139-50.10.1016/j.matdes.2017.08.049 ↗
14. M.E. Aydinöz, F. Brenne, M. Schaper, C. Schaak, W. Tillmann, J. Nellesen, and T. Niendorf: Mater. Sci. Eng. A, 2016, vol. 669, pp. 246-58.10.1016/j.msea.2016.05.089 ↗
15. M.D. Sangid, T.A. Book, D. Naragani, J. Rotella, P. Ravi, A. Finch, P. Kenesei, J.S. Park, H. Sharma, J. Almer, and X. Xiao: Addit. Manuf., 2018, vol. 22, pp. 479-96.10.1016/j.addma.2018.04.032 ↗
16. J. Schneider, B. Lund, and M. Fullen: Addit. Manuf., 2018, vol. 21, pp. 248-54.10.1016/j.addma.2018.03.005 ↗
17. T.D. McLouth, G.E. Bean, D.B. Witkin, S.D. Sitzman, P.M. Adams, D.N. Patel, W. Park, J.M. Yang, and R.J. Zaldivar: Mater. Des., 2018, vol. 149, pp. 205-13.10.1016/j.matdes.2018.04.019 ↗
18. J.R. Davis: ASM Specialty Handbook: Nickel, Cobalt, and Their Alloys, ASM International, Materials Park, Ohio, 2000, pp. 1-188.
19. B.B. Rashmi, A. Collins, and S. Silverman: in Superalloys 718, 625, 706 and Various Derivatives, E.A. Lorin, ed., TMS, Warrendale, PA, 2001, pp. 47–55.
20. T.M. Pollock and S. Tin: J. Propuls. Power, 2006, vol. 22, pp. 361–74.10.2514/1.18239 ↗
21. A. Naor, N. Eliaz, E. Gileadi, and S.R. Taylor: AMMTIAC Q., 2010, vol. 5, pp. 11–4.
22. S. Wöllmer, T. Mack, and U. Glatzel: Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 792–5.10.1016/S0921-5093(01)01063-2 ↗
23. 23. D. Blavette, P. Caron, and T. Khan: Scr. Metall., 1986, vol. 20, pp. 1395–400.10.1016/0036-9748(86)90103-1 ↗
24. M. Karunaratne, P. Carter, and R.C. Reed: Mater. Sci. Eng. A, 2000, vol. 281, pp. 229–33.10.1016/S0921-5093(99)00705-4 ↗
25. A. Janotti, M. Krčmar, C.L. Fu, and R.C. Reed: Phys. Rev. Lett., 2004, vol. 92, p. 85901.10.1103/PhysRevLett.92.085901 ↗
26. 26. A. Volek, F. Pyczak, R.F. Singer, and H. Mughrabi: Scr. Mater., 2005, vol. 52, pp. 141–5.10.1016/j.scriptamat.2004.09.013 ↗
27. P.J. Warren, A. Cerezo, and G.D.W. Smith: Mater. Sci. Eng. A, 1998, vol. 250, pp. 88–92.10.1016/S0921-5093(98)00541-3 ↗
28. U. Hemmersmeier and M. Feller-Kniepmeier: Mater. Sci. Eng. A, 1998, vol. 248, pp. 87–97.10.1016/S0921-5093(98)00516-4 ↗
29. A.F. Giamei and D.L. Anton: Metall. Trans. A, 1985, vol. 16A, pp. 1997–2005.10.1007/BF02662400 ↗
30. T. Jin, W.Z. Wang, X.F. Sun, and Z.Q. Hu: Mater. Sci. Forum, 2010, vol. 638–642, pp. 2257–62.10.4028/www.scientific.net/MSF.638-642.2257 ↗
31. 31. Z. Zhu, H. Basoalto, N. Warnken, and R.C. Reed: Acta Mater., 2012, vol. 60, pp. 4888–900.10.1016/j.actamat.2012.05.023 ↗
32. M.A. Amin, N. El-bagoury, M. Saracoglu, and M. Ramadan: Int. J. Electrochem. Sci., 2014, vol. 9, pp. 5352–74.10.1016/S1452-3981(23)08171-3 ↗
33. T. Kurzynowski, I. Smolina, K. Kobiela, B. Kuźnicka, and E. Chlebus: Mater. Des., 2017, vol. 132, pp. 349–59.10.1016/j.matdes.2017.07.024 ↗
34. 34. L. Thijs, M.L.M. Sistiaga, R. Wauthle, Q. Xie, J.-P. Kruth, and J. Van Humbeeck: Acta Mater., 2013, vol. 61, pp. 4657–68.10.1016/j.actamat.2013.04.036 ↗
35. 35. L.L. Parimi, G.A. Ravi, D. Clark, and M.M. Attallah: Mater. Charact., 2014, vol. 89, pp. 102–11.10.1016/j.matchar.2013.12.012 ↗
36. 36. T. Antonsson and H. Fredriksson: Metall. Mater. Trans. B, 2005, vol. 36B, pp. 85–96.10.1007/s11663-005-0009-0 ↗
37. 37. J.N. Dupont, C. V Robino, J.R. Michael, M.R. Notis, and A.R. Marder: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2785–96.10.1007/s11661-998-0319-3 ↗
38. 38. J.N. Dupont, C. V Robino, and A.R. Marder: Acta Mater., 1998, vol. 46, pp. 4781–90.10.1016/S1359-6454(98)00123-2 ↗
39. 39. M.J. Cieslak, T.J. Headley, G.A. Knorovsky, A.D. Romig, and T. Kollie: Metall. Mater. Trans. A, 1990, vol. 21A, pp. 479–88.10.1007/BF02782428 ↗
40. 40. N. El-Bagoury, K. Yamamoto, H. Miyahara, and K. Ogi: Mater. Trans., 2005, vol. 46, pp. 909–15.10.2320/matertrans.46.909 ↗
41. 41. N. El-Bagoury, A.A. Omar, and K. Ogi: Metallogr. Microstruct. Anal., 2012, vol. 1, pp. 35–44.10.1007/s13632-012-0011-2 ↗
42. 42. T. Vilaro, C. Colin, J.D. Bartout, L. Naze, and M. Sennour: Mater. Sci. Eng. A, 2012, vol. 534, pp. 446–51.10.1016/j.msea.2011.11.092 ↗
43. A.A. Antonysamy: Ph.D. Thesis, University of Manchester, UK, 2012.
44. 44. P.A. Kobryn and S.L. Semiatin: J. Mater. Process. Technol., 2003, vol. 135, pp. 330–9.10.1016/S0924-0136(02)00865-8 ↗
45. 45. A.M. Riley, D.B. Wells, and D.E. Williams: Corros. Sci., 1991, vol. 32, pp. 1307–13.10.1016/0010-938X(91)90050-Y ↗
46. 46. S. Al Saadi, Y. Yi, P. Cho, C. Jang, and P. Beeley: Corros. Sci., 2016, vol. 111, pp. 720–7.10.1016/j.corsci.2016.06.011 ↗
47. 47. U. Trdan and J. Grum: Corros. Sci., 2014, vol. 82, pp. 328–38.10.1016/j.corsci.2014.01.032 ↗
48. D. Karthik, S.A.X. Stango, U. Vijayalakshmi, and S. Swaroop: Surf. Coatings Technol., 2017, vol. 311, pp. 46–54.10.1016/j.surfcoat.2016.12.105 ↗
49. J. Zhang, C. Gu, and J. Tu: Surf. Coatings Technol., 2017, vol. 320, pp. 640–7.10.1016/j.surfcoat.2016.10.004 ↗
50. T. Chen, H. John, J. Xu, Q. Lu, J. Hawk, and X. Liu: Corros. Sci., 2014, vol. 78, pp. 151–61.10.1016/j.corsci.2013.09.010 ↗
51. Z. Brytan, J. Niagaj, and L. Reiman: Appl. Surf. Sci., 2016, vol. 388, pp. 160–68.10.1016/j.apsusc.2016.01.260 ↗
52. J.R. MacDonald: J. Electroanal. Chem. Interfacial Electrochem., 1987, vol. 223, pp. 25–50.10.1016/0022-0728(87)85249-X ↗