Mitigating Intergranular Stress Corrosion Cracking in Age-Hardenable Al-Zn-Mg-Cu Alloys
Source abstract
Abstract
This article reports an attempt to develop high-strength aluminum alloys of 7xxx series resistant to intergranular stress corrosion cracking (SCC). A novel aging technique reported in this work exhibited improved strength levels (as high as ~ 100 MPa to that of conventional overaged temper for AA 7050) with significant resistance to SCC measured even at a low strain rate (10−7 s−1) in 3.5 wt pct NaCl. The novel aging heat treatment produced a microstructure that is finer and dense enough in the matrix to impart strength, whereas it is enriched with Cu on the grain boundaries to impart SCC resistance. A detailed explanation for the enhanced strength and SCC resistance is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (47)
Show source-provided references
1. 1.M.B. Kannan, V.S. Raja, and A.K. Mukhopadhyay: Scripta Mater., 2004, vol. 51, pp. 1075–79.10.1016/j.scriptamat.2004.08.002 ↗
2. 2.M. Bobby Kannan, R. Raman, A. Mukhopadhyay, and V. Raja: Corrosion, 2003, vol. 59, pp. 881–89.10.5006/1.3287709 ↗
3. M.B. Kannan and V.S. Raja: Corros. Rev., 2009, vol. 27, pp. 147—80.10.1515/CORRREV.2009.27.S1.147 ↗
4. 4.J.S. Warner, S. Kim, and R.P. Gangloff: Int. J. Fatigue, 2009, vol. 31, pp. 1952–65.10.1016/j.ijfatigue.2009.01.016 ↗
5. 5.J.T. Burns, S. Kim, and R.P. Gangloff: Corros. Sci., 2010, vol. 52, pp. 498–508.10.1016/j.corsci.2009.10.006 ↗
6. 6.M. Bobby Kannan and V.S. Raja.: J. Mater. Sci., 2006, vol. 41, pp. 5495–99.10.1007/s10853-006-0287-1 ↗
7. 7.I. Polmear: Mater. Forum, 2004, vol. 28, pp. 1–14.
8. 8.S.P. Knight, N. Birbilis, B.C. Muddle, A.R. Trueman, and S.P. Lynch: Corros. Sci., 2010, vol. 52, pp. 4073–80.10.1016/j.corsci.2010.08.024 ↗
9. 9.S.S. Kale, V.S. Raja, and A.K. Bakare: Corros. Sci., 2013, vol. 75, pp. 318–25.10.1016/j.corsci.2013.06.015 ↗
10. 10.R. Goswami, S. Lynch, N.J.H. Holroyd, S.P. Knight, and R.L. Holtz: Metall. Mater. Trans. A, 2013, vol. 44A, p. 1268.10.1007/s11661-012-1413-0 ↗
11. 11.S.P. Knight, K. Pohl, N.J.H. Holroyd, N. Birbilis, P.A. Rometsch, B.C. Muddle, R. Goswami, and S.P. Lynch: Corros. Sci., 2015, vol. 98, pp. 50–62.10.1016/j.corsci.2015.05.016 ↗
12. 12.J.C. Lin, H.L. Liao, W.D. Jehng, C.H. Chang, and S.L. Lee: Corros. Sci., 2006, vol. 48, pp. 3139–56.10.1016/j.corsci.2005.11.009 ↗
13. 13.A.K. Mukhopadhyay, K.S. Prasad, V. Kumar, G.M. Reddy, S.V. Kamat, and V.K. Varma: Mater. Sci. Forum, 2006, vols. 519–521, pp. 315–20.10.4028/www.scientific.net/MSF.519-521.315 ↗
14. 14.T.C. Tsai and T.H. Chuang: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2617–27.10.1007/BF02652355 ↗
15. 15.S. Wang, I. Huang, L. Yang, J. Jiang, and J. Chen: J. Electrochem. Soc., 2015, vol. 162, pp. 150–60.10.1149/2.0301504jes ↗
16. 16.L.P. Huang, K.H. Chen, S. Li, and M. Song: Scripta Mater., 2007, vol. 56, pp. 305–08.10.1016/j.scriptamat.2006.09.028 ↗
17. 17.D.K. Xu, N. Birbilis, and P.A. Rometsch: Corrosion, 2012, vol. 68, pp. 1–10
18. 18.Y. Reda, R. Abdel Karim, and I. Elmahallawi: Mater. Sci. Eng. A, 2008, vol. 485, pp. 468–75.10.1016/j.msea.2007.08.025 ↗
19. 19.J.S. Robinson: Mater. Sci. Technol., 2003, vol. 19, pp. 1697–1704.10.1179/026708303225008383 ↗
20. 20.C.P. Ferrer, M.G. Koul, B.J. Connolly, and A.L. Moran: Corrosion, 2003, vol. 59, pp. 520–28.10.5006/1.3277583 ↗
21. 21.B. Cina: Metall. Mater. Trans. A, 1989, vol. 20, pp. 2087–92.
22. A.F. Oliveira, M.C. De Barros, K.R. Cardoso, and D.N. Travessa: Materials Science and Engineering: A, 2004, vol. 379, pp. 321–26.10.1016/j.msea.2004.02.052 ↗
23. 23.T. Marlaud, A. Deschamps, F. Bley, W. Lefebvre, and B. Baroux: Acta Mater., 2010, vol. 58, pp. 4814–26.10.1016/j.actamat.2010.05.017 ↗
24. 24.G. Sha and A. Cerezo: Acta Mater., 2004, vol. 52, pp. 4503–16.10.1016/j.actamat.2004.06.025 ↗
25. 25.L.K. Berg, D. Schryvers, and L.R. Wallenberg: Acta Mater., 2001, vol. 4, pp. 3443–51.10.1016/S1359-6454(01)00251-8 ↗
26. 26.A. Deschamps, Y. Bréchet, and F. Livet: Mater. Sci. Technol., 1999, vol. 15, pp. 993–1000.10.1179/026708399101506832 ↗
27. M. Ajay Krishnan, V.S. Raja, and S.M. Vaidya: PCT/IN2016/000280, 2016.
28. “Standard Test Methods for Tension Testing of Metallic Materials,” ASTM E8, ASTM, Philadelphia, PA, 2009.
29. 29.M.D. Pustode, V.S. Raja, and N. Paulose: Corros. Sci., 2014, vol. 82, pp. 191–96.10.1016/j.corsci.2014.01.013 ↗
30. “Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens,” ASTM G1-03, ASTM, Philadelphia, PA, 2012.
31. 31.D. Najjar, T. Magnin, and T. Warner: Mater. Sci. Eng. A, 1997, vol. 238, pp. 293–302.10.1016/S0921-5093(97)00369-9 ↗
32. 32.Y.J. Ro, S.R. Agnew, and R.P. Gangloff: Metall. Mater. Trans. A, Phys. Metall. Mater. Sci., 2008, vol. 39A, pp. 1449–65.10.1007/s11661-008-9522-5 ↗
33. 33.T.S.T. Sudharshan: Eng. Fract. Mech., 1990, vol. 37, pp. 569–89.10.1016/0013-7944(90)90381-P ↗
34. 34.M. Dixit, R.S. Mishra, and K.K. Sankaran: Mater. Sci. Eng. A, 2008, vol. 478, pp. 163–72.10.1016/j.msea.2007.05.116 ↗
35. 35.N.M. Han, X.M. Zhang, S.D. Liu, D.G. He, and R. Zhang: J. Alloys Compd., 2011, vol. 509, pp. 4138–45.10.1016/j.jallcom.2011.01.005 ↗
36. 36.M.B. Kannan, V.S. Raja, A.K. Mukhopadhyay, P. Schmuki, and R. Fujii: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 3257–62.10.1007/s11661-005-0098-z ↗
37. 37.A.K. Vasudevan and K. Sadananda: Metall. Mater. Trans. A, 2010, vol. 42A, pp. 405–14.
38. 38.K. Sadananda and A.K. Vasudevan: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 279–95.10.1007/s11661-010-0472-3 ↗
39. 39.J.S. Warner and R.P. Gangloff: Int. J. Fatigue, 2012, vol. 42, pp. 35–44.10.1016/j.ijfatigue.2011.04.013 ↗
40. 40.T. Ramgopal, P. Schmutz, and G.S. Frankel: J. Electrochem. Soc., 2001, vol. 148, p. B348.10.1149/1.1386626 ↗
41. 41.N. Birbilis and R.G. Buchheit: J. Electrochem. Soc., 2005, vol. 152, p. B140.10.1149/1.1869984 ↗
42. 42.G.M. Scamans: J. Mater. Sci., 1978, vol. 13, pp. 27–36.10.1007/BF00739268 ↗
43. D.A. Hardwick, A.W. Thompson, and I.M. Bernstein: Metallurgical Transactions A, 1983, vol. 14, pp. 2517–26.10.1007/BF02668893 ↗
44. 44.T.D. Burleigh: Corrosion, 1991, vol. 47, pp. 89–98.10.5006/1.3585235 ↗
45. 45.K.R. Cooper and R.G. Kelly: Corros. Sci., 2007, vol. 49, pp. 2636–62.10.1016/j.corsci.2006.12.001 ↗
46. 46.Q. Meng and G.S. Frankel: J. Electrochem. Soc., 2004, vol. 151, p. B271.10.1149/1.1695385 ↗
47. 47.C.B. Crane and R.P. Gangloff: Corrosion, 2016, vol. 72, pp. 242–63.10.5006/1766 ↗