Influence of Heating Rate on Ferrite Recrystallization and Austenite Formation in Cold-Rolled Microalloyed Dual-Phase Steels
Source abstract
Abstract
Compared with other dual-phase (DP) steels, initial microstructures of cold-rolled martensite-ferrite have scarcely been investigated, even though they represent a promising industrial alternative to conventional ferrite-pearlite cold-rolled microstructures. In this study, the influence of the heating rate (over the range of 1 to 10 K/s) on the development of microstructures in a microalloyed DP steel is investigated; this includes the tempering of martensite, precipitation of microalloying elements, recrystallization, and austenite formation. This study points out the influence of the degree of ferrite recrystallization prior to the austenite formation, as well as the importance of the cementite distribution. A low heating rate giving a high degree of recrystallization, leads to the formation of coarse austenite grains that are homogenously distributed in the ferrite matrix. However, a high heating rate leading to a low recrystallization degree, results in a banded-like structure with small austenite grains surrounded by large ferrite grains. A combined approach, involving relevant multiscale microstructural characterization and modeling to rationalize the effect of the coupled processes, highlights the role of the cold-worked initial microstructure, here a martensite-ferrite mixture: recrystallization and austenite formation commence in the former martensite islands before extending in the rest of the material.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Magnetic Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. H. Hofmann, D. Matissen, and T.W. Schaumann: Steel Res. Int., 2009, vol. 80, pp. 22–8.
2. R. Kuziak, R. Kawalla, and S. Waengler: Arch. Civ. Mech. Eng., 2008, vol. 8, pp. 103–17.10.1016/S1644-9665(12)60197-6 ↗
3. K. Bleck and W. Phiou-on: Microstructure and Texture in Steels and Other Materials, Springer, London, 2009, pp. 145–63.10.1007/978-1-84882-454-6_9 ↗
4. O. Bouaziz, H. Zurob, and M. Huang: Steel Res. Int., 2013, vol. 84, pp. 937–47.10.1002/srin.201200288 ↗
5. D.K. Matlock, G. Krauss, and J.G. Speer: Mater. Sci. Forum, 2005, vol. 500–501, pp. 87–96.10.4028/www.scientific.net/MSF.500-501.87 ↗
6. N. Pottore, N. Fonstein, I. Gupta, and D. Bhattacharya: Proceedings of the International Conference on Advanced High Strength Sheet Steels for Automotive Applications, 2004, pp. 119–30.
7. J. Zrnik, I. Mamuzic, and S. Dobatkin: Metalurgija, 2006, vol. 45, pp. 323–31.
8. C.C. Tasan, M. Diehl, D. Yan, M. Bechtold, F. Roters, L. Schemmann, C. Zheng, N. Peranio, D. Ponge, M. Koyama, K. Tsuzaki, and D. Raabe: Annu. Rev. Mater. Res., 2015, vol. 45, pp. 391–431.10.1146/annurev-matsci-070214-021103 ↗
9. G.R. Speich, V.A. Demarest, and R.L. Miller: Metall. Trans. A, 1981, vol. 12, pp. 1419–28.10.1007/BF02643686 ↗
10. C. Garcia and A. DeArdo: Metall. Trans. A, 1981, vol. 12, pp. 521–30.10.1007/BF02648551 ↗
11. D.Z. Yang, E.L. Brown, D.K. Matlock, and G. Krauss: Metall. Trans. A, 1985, vol. 16, pp. 1385–92.10.1007/BF02658671 ↗
12. A. Marder: Metall. Trans. A, 1982, vol. 13, pp. 85–92.10.1007/BF02642418 ↗
13. A. Ramazani, K. Mukherjee, U. Prahl, and W. Bleck: Comput. Mater. Sci., 2012, vol. 52, pp. 46–54.10.1016/j.commatsci.2011.05.041 ↗
14. N. Nakada, Y. Arakawa, K.S. Park, T. Tsuchiyama, and S. Takaki: Mater. Sci. Eng. A, 2012, vol. 553, pp. 128–33.10.1016/j.msea.2012.06.001 ↗
15. M. Kulakov, W.J. Poole, and M. Militzer: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3564–3576.10.1007/s11661-013-1721-z ↗
16. S.A. Etesami, M.H. Enayati, and A.G. Kalashami: Mater. Sci. Eng. A, 2017, vol. 682, pp. 296–303.10.1016/j.msea.2016.09.112 ↗
17. A. Karmakar, M. Ghosh, and D. Chakrabarti: Mater. Sci. Eng. A, 2013, vol. 564, pp. 389–99.10.1016/j.msea.2012.11.109 ↗
18. A.G. Kalashami, A. Kermanpur, A. Najafizadeh, and Y. Mazaheri: Mater. Sci. Eng. A, 2016, vol. 658, pp. 355–66.10.1016/j.msea.2016.02.028 ↗
19. Y. Kang, Q. Han, X. Zhao, and M. Cai: Mater. Des., 2013, vol. 44, pp. 331–9.10.1016/j.matdes.2012.07.068 ↗
20. C. Hutchinson, H. Zurob, C. Sinclair, and Y. Brechet: Scr. Mater., 2008, vol. 59, pp. 635–7.10.1016/j.scriptamat.2008.05.036 ↗
21. X. Liang, J. Li, and Y. Peng: Mater. Lett., 2008, vol. 62, pp. 327–9.10.1016/j.matlet.2007.05.034 ↗
22. J. Huang, W.J. Poole, and M. Militzer: Metall. Mater. Trans. A, 2004, vol. 35, pp. 3363–75.10.1007/s11661-004-0173-x ↗
23. A. Chbihi, D. Barbier, L. Germain, A. Hazotte, and M. Gouné: J. Mater. Sci., 2014, vol. 49, pp. 3608–21.10.1007/s10853-014-8029-2 ↗
24. P. Li, J. Li, Q. Meng, W. Hu, and D. Xu: J. Alloys Compd., 2013, vol. 578, pp. 320–7.10.1016/j.jallcom.2013.05.226 ↗
25. A. Karmakar, M. Mandal, A. Mandal, M. Basiruddin Sk, S. Mukherjee, and D. Chakrabarti: Metall. Mater. Trans. A, 2016, vol. 47, pp. 268–281.10.1007/s11661-015-3248-y ↗
26. M. Gouné, P. Maugis, and J. Drillet: J. Mater. Sci. Technol., 2012, vol. 28, pp. 728–36.10.1016/S1005-0302(12)60122-4 ↗
27. H.S. Zurob, C.R. Hutchinson, Y. Brechet, and G. Purdy: Acta Mater., 2002, vol. 50, pp. 3077–94.10.1016/S1359-6454(02)00097-6 ↗
28. A. Deschamps and Y. Brechet: Acta Mater., 1998, vol. 47, pp. 293–305.10.1016/S1359-6454(98)00296-1 ↗
29. S.J. Jones and H.K.D.H. Bhadeshia: Acta Mater., 1997, vol. 45, pp. 2911–20.10.1016/S1359-6454(96)00392-8 ↗
30. T. Ogawa, N. Maruyama, N. Sugiura, and N. Yoshinaga: ISIJ Int., 2010, vol. 50, pp. 469–75.10.2355/isijinternational.50.469 ↗