Mechanical Properties of Gradient Structure Mg Alloy
Source abstract
Abstract
In this work, a surface mechanical attrition treatment (SMAT) process was applied to AZ31B magnesium alloy at room temperature. This method produced a gradient structure on the treated AZ31B, in which the grains of the topmost layer are refined to nanoscale sizes. A combination of nanocrystallites at the surface and coarse-grains in the center are the main features of this structure. This structure results in an excellent combination of both strength and ductility. The highest yield strength for the 30 minutes SMAT AZ31B samples increased to 249 ± 5 MPa and the uniform elongation decreased to 9.3 ± 0.8 pct, whereas the original yield strength was only 147 ± 4 MPa and the uniform elongation was 15.4 ± 1.1 pct. Microstructural observations, stress relaxation tests, and hardness tests were used to verify the results. Additionally, there is a specific volume fraction of gradient structure to achieve the best mechanical performance, which is shown to be in the range of 9.3 to 14 pct for the AZ31B alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Metal and Thin Film Mechanics · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. Y. Saito, H. Utsunomiya, N. Tsuji and T. Sakai, Acta Mater. 1999, vol. 47, pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
2. Q. Wang, Y. Chen, M. Liu, J. Lin and H.J. Roven, Mater. Sci. Eng. A 2010, vol. 527, pp. 2265–73.10.1016/j.msea.2009.11.065 ↗
3. T. Peng, Q.D. Wang and J.B. Lin, Mater. Sci. Eng. A 2009, vol. 516, pp. 23–30.10.1016/j.msea.2009.04.024 ↗
4. Y.J. Chen, Q.D. Wang, H.J. Roven, M.P. Liu, M. Karlsen, Y.D. Yu and J. Hjelen, Scripta. Mater. 2008, vol. 58, pp. 311–4.10.1016/j.scriptamat.2007.09.058 ↗
5. Q.D. Wang, Y.J. Chen, J.B. Lin, L.J. Zhang and C.Q. Zhai, Mater. Lett. 2007, vol. 61, pp. 4599–4602.10.1016/j.matlet.2007.02.067 ↗
6. M.P. Liu and H.J. Roven, Appl. Phys. Lett. 2007, vol. 90, p. 083115.10.1063/1.2696540 ↗
7. M. Liu, H. J. Roven, M. Murashkin and R.Z. Valiev, Mater. Sci. Eng. A 2009, vol. 503, pp. 122–5.10.1016/j.msea.2008.02.053 ↗
8. S.C. Yoon, Z. Horita and H.S. Kim, J. Mater. Process. Tech 2008, vol. 201, pp. 32–6.10.1016/j.jmatprotec.2007.11.204 ↗
9. Y. Beygelzimer, V. Varyukhin, S. Synkov and D. Orlov, Mater. Sci. Eng. A 2009, vol. 503, pp. 14–17.10.1016/j.msea.2007.12.055 ↗
10. X.L. Wu, P. Jiang, L. Chen, J.F. Zhang, F.P. Yuan, and Y.T. Zhu: Mater. Res. Lett., 2014, pp. 182–91.
11. Y. Wei, Y. Li, L. Zhu, Y. Liu, X. Lei, G. Wang, Y. Wu, Z. Mi, J. Liu, H. Wang and H. Gao, Nat. Commun. 2014, vol. 5, p. 3580.10.1038/ncomms4580 ↗
12. K. Lu, Science 2014, vol. 345, pp. 1455–1456.10.1126/science.1255940 ↗
13. X. Wu, N. Tao, Y. Hong, B. Xu, J. Lu and K. Lu, Acta Mater. 2002, vol. 50, pp. 2075–84.10.1016/S1359-6454(02)00051-4 ↗
14. Y.M. Wang, K. Wang, D. Pan, K. Lu, K. J. Hemker and E. Ma, Scripta. Mater. 2003, vol. 48, pp. 1581–86.10.1016/S1359-6462(03)00159-3 ↗
15. N.R. Tao, Z.B. Wang, W.P. Tong, M.L. Sui, J. Lu and K. Lu, Acta Mater. 2002, vol. 50, pp. 4603–16.10.1016/S1359-6454(02)00310-5 ↗
16. K.Y. Zhu, A. Vassel, F. Brisset, K. Lu and J. Lu, Acta Mater. 2004, vol. 52, pp. 4101–10.10.1016/j.actamat.2004.05.023 ↗
17. N.R. Tao, X.L. Wu, M.L. Sui, J. Lu and K. Lu, J. Mater. Res. 2004, vol. 19, pp. 1623–29.10.1557/JMR.2004.0227 ↗
18. H. Zhang, Z. Hei, G. Liu, J. Lu and K. Lu, Acta Mater. 2003, vol. 51, pp. 1871–81.10.1016/S1359-6454(02)00594-3 ↗
19. T. Roland, D. Retraint, K. Lu and J. Lu, Scripta Mater. 2006, vol. 54, pp. 1949–54.10.1016/j.scriptamat.2006.01.049 ↗
20. H.Q. Sun, Y.N. Shi, M.X. Zhang and K. Lu, Acta Mater. 2007, vol. 55, pp. 975–82.10.1016/j.actamat.2006.09.018 ↗
21. X.L. Wu, P. Jiang, L. Chen, F.P. Yuan and Y.T.T. Zhu, Proc. Natl. Acad. Sci. USA 2014, vol. 111, pp. 7197–7201.10.1073/pnas.1324069111 ↗
22. X.L. Ma, C.X. Huang, W.Z. Xu, H. Zhou, X.L. Wu and Y.T. Zhu, Scripta. Mater. 2015, vol. 103, pp. 57–60.10.1016/j.scriptamat.2015.03.006 ↗
23. J. Lu, H.L. Chan, A.Y. Chen and H.N. Kou, Procedia Eng. 2011, vol. 10, pp. 2202–07.10.1016/j.proeng.2011.04.364 ↗
24. S. Jelliti, C. Richard, D. Retraint, T. Roland, M. Chemkhi and C. Demangel, Surf. Coat. Tech. 2013, vol. 224, pp. 82–7.10.1016/j.surfcoat.2013.02.052 ↗
25. H.W. Huang, Z.B. Wang, J. Lu and K. Lu, Acta Mater. 2015, vol. 87, pp. 150–60.10.1016/j.actamat.2014.12.057 ↗
26. D. B. Williams and C. B. Carter, In Transmission Electron Microscopy: A Textbook for Materials Science, (Springer US: Boston, MA, 2009), pp 283–309.10.1007/978-0-387-76501-3_18 ↗
27. G.K. Williamson and W.H. Hall, Acta Metall 1953, vol. 1, pp. 22–31.10.1016/0001-6160(53)90006-6 ↗
28. W. Guo, Q.D. Wang, B. Ye, M.P. Liu, T. Peng, X.T. Liu and H. Zhou, Mater. Sci. Eng. A 2012, vol. 540, pp. 115–22.10.1016/j.msea.2012.01.111 ↗
29. X. Wu, N. Tao, Y. Hong, J. Lu, and K. Lu: J. Phys. D Appl. Phys., 2005, vol. 38, pp. 4140–43.10.1088/0022-3727/38/22/019 ↗
30. H.T. Wang, N.R. Tao and K. Lu, Scripta. Mater. 2013, vol. 68, pp. 22–7.10.1016/j.scriptamat.2012.05.041 ↗
31. I.C.R. Armstrong, R.M. Douthwaite, N.J. Petch, Philos. Mag. 1962, vol. 7, pp. 45–58.10.1080/14786436208201857 ↗
32. Y.-H. Wei, B.-S. Liu, L.-F. Hou, B.-S. Xu and G. Liu, J. Alloy. Compd. 2008, vol. 452, pp. 336–42.10.1016/j.jallcom.2006.11.079 ↗
33. J.L. Martin. and D. Caillard: Thermally Activated Mechanisms in Crystal Plasticity, 1st ed., Elsevier Ltd., The Boulevard, langford lane Kidlington, Oxford OX5 IGB, UK 2003, pp. 13–28.
34. X. L. Wu, K.M. Youssef, C.C. Koch, S.N. Mathaudhu, L.J. Kecskés and Y.T. Zhu, Scripta Mater. 2011, vol. 64, pp. 213–16.10.1016/j.scriptamat.2010.10.024 ↗
35. L. Lu, T. Zhu, Y. Shen, M. Dao, K. Lu and S. Suresh, Acta Mater. 2009, vol. 57, pp. 5165–73.10.1016/j.actamat.2009.07.018 ↗