journal article·2016-12

Influences of Hydrogen Micropores and Intermetallic Particles on Fracture Behaviors of Al-Zn-Mg-Cu Aluminum Alloys

Hang Su, Takuro Yoshimura, Hiroyuki Toda, Md. Shahnewaz Bhuiyan, Kentaro Uesugi, Akihisa Takeuchi, Nobuhito Sakaguchi, Yoshio Watanabe

Publisher page

Abstract

The combined effects of hydrogen micropores and intermetallic particles on the voids initiation and growth behavior of Al-Zn-Mg-Cu aluminum alloys during deformation and fracture are investigated with the help of the high-resolution X-ray tomography. It is interesting to note that the high-hydrogen concentration induced by an EDM cutting process results in the initiation of quasi-cleavage fracture near surface. With the increase of strain, the quasi-cleavage fracture is gradually replaced by dimple fracture. Voids initiation related to the dimple fracture is caused by both intermetallic particles fracture and interfacial debonding between particles and matrix. The nucleation of hydrogen micropores on intermetallic particles accelerates the voids initiation. The existence of triaxial stress ahead of the tip of a quasi-cleavage crack enhances growth rate for both hydrogen micropores and voids.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. [1] A. Heinz, A. Haszler, C. Keidel, S. Moldenhauer, R. Benedictus and W.S. Miller: Mater. Sci. Eng., A, 2000, vol. 280, pp. 102–07.10.1016/S0921-5093(99)00674-7 ↗
2. [2] K.H. Rendigs: Mater. Sci. Forum, 1997, vol. 242, pp. 11–24.10.4028/www.scientific.net/MSF.242.11 ↗
3. [3] J.C. Williams and E.A. Starke Jr: Acta Mater, 2003, vol. 51, pp. 5775–99.10.1016/j.actamat.2003.08.023 ↗
4. [4] D. Dumont, A. Deschamps and Y. Brechet: Acta Mater, 2004, vol. 52, pp. 2529- 40.10.1016/j.actamat.2004.01.044 ↗
5. [5] T. Ueda, L. Helfen and T. F. Morgeneyer: Acta Mater, 2014, vol. 78, pp. 254-70.10.1016/j.actamat.2014.06.029 ↗
6. [6] A. Hosokawa, D. S. Wilkinson, J. Kang and E. Maire: Acta Mater, 2013, vol. 61 pp. 1021–36.10.1016/j.actamat.2012.08.002 ↗
7. [7] C. Landron, O. Bouaziz, E. Maire and J. Adrien: Acta Mater, 2013, vol. 61 pp. 6821-29.10.1016/j.actamat.2013.07.058 ↗
8. [8] N. N. Krishna, A. K. Akash, K. Sivaprasad and R. Narayanasamy: Mater. Des., 2010, vol. 31, pp. 3578-84.10.1016/j.matdes.2010.01.056 ↗
9. [9] W. Ma, B. Wang, L. Yang, X. Tang, W. Xiao and J. Zhou: Mater. Des., 2015, vol. 88, pp. 1119–26.10.1016/j.matdes.2015.09.044 ↗
10. [10] K. Hashimoto, T. Fujimatsu, N. Tsunekage, K. Hiraoka, K. Kida and E.C. Santos: Mater. Des., 2011, vol. 32, pp. 4980–85.10.1016/j.matdes.2011.06.056 ↗
11. [11] S. Joseph and S. Kumar: Mater. Sci. Eng. A., 2013, vol. 588, pp. 111–24.10.1016/j.msea.2013.09.019 ↗
12. [12] S. S. Singh, E. Guo, H. Xie and N. Chawla: Intermetallics, 2015, vol. 62, pp. 69-7510.1016/j.intermet.2015.03.008 ↗
13. [13] Y. Deng, Z. Yin, F. Cong: Intermetallics, 2012, vol. 26, pp. 114-21.10.1016/j.intermet.2012.03.006 ↗
14. [14] H. Toda, H. Oogo, K. Uesugi and M. Kobayashi: Mater. Trans., 2009, vol. 50, pp. 2285-90.10.2320/matertrans.M2009123 ↗
15. [15] H. Toda, H. Oogo, K. Horikawa, K. Uesugi, A. Takeuchi, Y. Suzuki, M. Nakazawa, Y. Aoki and M. Kobayashi: Metall. Mater. Trans. A, 2014, vol. 45, pp. 765-76.10.1007/s11661-013-2013-3 ↗
16. [16] H. Toda, T. Hidaka, M. Kobayashi, K. Uesugi, A. Takeuchi and K. Horikawa: Acta Mater, 2009, vol. 57, pp. 2277-90.10.1016/j.actamat.2009.01.026 ↗
17. [17] H. Toda, K. Minami, K. Koyama, K. Ichitani, M. Kobayashi, K. Uesugi and Y. Suzuki: Acta Mater, 2009, vol. 57, pp. 4391-03.10.1016/j.actamat.2009.06.012 ↗
18. [18] P. Hruby, S. S. Singh, J. J. Williams, X. Xiao, F. De Carlo and N. Chawla: Int. J. Fatigue, 2014, vol. 68, pp. 136-43.10.1016/j.ijfatigue.2014.05.010 ↗
19. [19] J.J. Williams, K.E. Yazzie, E. Padilla, N. Chawla, X. Xiao and F. De Carlo: Int. J. Fatigue. 2013, vol. 57, pp. 79-85.10.1016/j.ijfatigue.2012.06.009 ↗
20. [20] M. Felberbeaum and M. Rappaz: Acta Mater, 2011, vol. 59, pp. 6849-60.10.1016/j.actamat.2011.07.005 ↗
21. [21] K. L. Taylor and A. H. Sherry: Acta Mater, 2012, vol. 60, pp. 1300-10.10.1016/j.actamat.2011.11.031 ↗
22. [22] T. F. Morgeneyer, M. J. Starink and I. Sinclair: Acta Mater, 2008, vol. 56, pp. 1671-79.10.1016/j.actamat.2007.12.019 ↗
23. [23] R.G. Song, W. Dietzel, B. J. Zhang, W. J. Liu, M. K. Tseng and A. Atrens: Acta Mater, 2004, Vol. 52, pp. 4727-43.10.1016/j.actamat.2004.06.023 ↗
24. [24] Y. Liang, P. Sofronis and N. Aravas: Acta Mater, 2003, vol. 51, pp. 2717-3010.1016/S1359-6454(03)00081-8 ↗
25. G. A. Young and J. R. Scully: Acta Mater, 1998, vol. 46, pp. 6337-49.10.1016/S1359-6454(98)00333-4 ↗
26. [26] L. Christodoulou and H. M. Flower: Acta Metall, 1979, vol. 28, pp. 481–87.10.1016/0001-6160(80)90138-8 ↗
27. [27] H. Toda, T. Kamiko, Y. Tanabe, M. Kobayashi, D. J. Leclere, K. Uesugi, A. Takeuchi and K. Hirayama: Acta Mater, 2016, vol. 107, pp. 310–24.10.1016/j.actamat.2016.01.072 ↗
28. [28] H. Toda, T. Nishimura, K. Uesugi, Y. Suzuki and M. Kobayashi: Acta Mater, 2010, vol. 58, pp. 2014–25.10.1016/j.actamat.2009.11.044 ↗
29. [29] H. Kamoutsi, G. N. Haidemenopoulos, V. Bontozoglou, P. V. Petroyiannis and Sp. G. Pantelakis. Corros. Sci., 2014, vol. 80, pp. 139–42.10.1016/j.corsci.2013.11.021 ↗
30. M.S. Bhuiyan, Y. Tada, H. Toda, S. Hang, K. Uesugi, A. Takeuchi, N. Sakaguchi and Y. Watanabe: Int. J. Fract. 2016, pp. 1–17.
31. [31] J. Albrecht, A. W. Thompson and I. M. Bernstein: Metall. Trans. A., 1979, vol. 10, pp. 1759–66.10.1007/BF02811712 ↗
32. [32] G. Lu, Q. Zhang, N. Kioussis and E. Kaxiras: Phys. Rev. Lett., 2001, vol. 87, pp. 95501- 04.10.1103/PhysRevLett.87.095501 ↗
33. [33] I. M. Robertson: Eng. Fract. Mech., 2001, vol. 68, pp. 671–92.10.1016/S0013-7944(01)00011-X ↗
34. [34] M. L. Martin, J. A. Fenske, G. S. Liu, P. Sofronis and I. M. Robertson: Acta Mater, 2011, vol. 59, pp. 1601–06.10.1016/j.actamat.2010.11.024 ↗
35. [35] R. Kirchheim, B. Somerday and P. Sofronis: Acta Mater, 2015, vol. 99, pp. 87–98.10.1016/j.actamat.2015.07.057 ↗
36. [36] D. J. Lloyd: Mater. Rev., 1994, vol. 39, pp. 1–23.10.1179/imr.1994.39.1.1 ↗
37. [37] Q.G. Wang: Metall. Mater. Trans. A, 2003, vol. 34, pp. 2887–2899.10.1007/s11661-003-0189-7 ↗
38. [38] Q.G. Wang, C.H. Caceres, J.R. Griffiths: Metall. Mater. Trans. A, 2003, vol. 34, pp. 2901–2912.10.1007/s11661-003-0190-1 ↗
39. [39] R. Rana, R. Purohit and S. Das: Int. J. Sci. Eng. Res., 2012, vol. 3, pp. 1–16.
40. [40] H. Toda, Y. Ohkawa, T. Kamiko, T. Naganuma, K. Uesugi, A. Takeuchi, Y. Suzuki and M. Kobayashi: Acta Mater, 2013, vol. 61, pp. 5535-48.10.1016/j.actamat.2013.06.013 ↗
41. [41] M. L. Martin, I. M. Robertson and P. Sofronis: Acta Mater, 2011, vol. 59, pp. 3680–87.10.1016/j.actamat.2011.03.002 ↗
42. [42] L. Babout, Y. Brechet, E. Maire and R. Fougères: Acta Mater, 2004, vol. 52, pp. 4517–25.10.1016/j.actamat.2004.06.009 ↗