Strengthening Mechanisms in Nanostructured Al/SiCp Composite Manufactured by Accumulative Press Bonding
Source abstract
Abstract
The strengthening mechanisms in nanostructured Al/SiC composite deformed to high strain by a novel severe plastic deformation process, accumulative press bonding (APB), were investigated. The composite exhibited yield strength of 148 MPa which was 5 and 1.5 times higher than that of raw aluminum (29 MPa) and aluminum-APB (95 MPa) alloys, respectively. A remarkable increase was also observed in the ultimate tensile strength of Al/SiC-APB composite, 222 MPa, which was 2.5 and 1.2 times greater than the obtained values for raw aluminum (88 MPa) and aluminum-APB (180 MPa) alloys, respectively. Analytical models well described the contribution of various strengthening mechanisms. The contributions of grain boundary, strain hardening, thermal mismatch, Orowan, elastic mismatch, and load-bearing strengthening mechanisms to the overall strength of the Al/SiC microcomposite were 64.9, 49, 6.8, 2.4, 5.4, and 1.5 MPa, respectively. Whereas Orowan strengthening mechanism was considered as the most dominating strengthening mechanism in Al/SiC nanocomposites, it was negligible for strengthening the microcomposite. Al/SiC nanocomposite showed good agreement with quadratic summation model; however, experimental results exhibited good accordance with arithmetic and compounding summation models in the microcomposite. While average grain size of the composite reached 380 nm, it was less than 100 nm in the vicinity of SiC particles as a result of particle-stimulated nucleation mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. R. Jamaati, M. Naseri, M.R. Toroghinejad: Mater. Des., 2014, vol. 59, pp. 540–49.10.1016/j.matdes.2014.03.027 ↗
2. R. Jamaati, M.R. Toroghinejad, J. Dutkiewicz, J.A. Szpunar: Mater. Des., 2012, vol. 35, pp. 37-42.10.1016/j.matdes.2011.09.040 ↗
3. I. Ibrahim, F. Mohamed, E. Lavernia: J. Mater. Sci., 1991, vol. 26, pp. 1137-1156.10.1007/BF00544448 ↗
4. E. Lacoste, C. Arvieu, J.M. Quenisset: J. Mater. Sci., 2015, vol. 50, pp. 5583-5592.10.1007/s10853-015-9108-8 ↗
5. H. Yue, H. Zhang, X. Gao, J. Chang, S. Zhang, J. Zhang, E. Guo, L. Wang, Z. Yu: Mater. Charact., 2015, vol. 99, pp. 47-51.10.1016/j.matchar.2014.11.010 ↗
6. [6] Š. Nagy, M. Nosko, Ľ. Orovčík, K. Iždinský, S. Kúdela, P. Krížik: Mater. Des., 2015, vol. 66, pp. 1-6.10.1016/j.matdes.2014.09.035 ↗
7. [7] S. Amirkhanlou, B. Niroumand: J. Mater. Process. Technol., 2012, vol. 212, pp. 841-847.10.1016/j.jmatprotec.2011.11.007 ↗
8. [8] S. Amirkhanlou, B. Niroumand: J. Mater. Eng. Perform., 2013, vol. 22, pp. 85-93.10.1007/s11665-012-0223-2 ↗
9. [9] Y. Ikoma, T. Toyota, Y. Ejiri, K. Saito, Q. Guo, Z. Horita: J. Mater. Sci., 2015, vol. 51, pp. 138-143.10.1007/s10853-015-9328-y ↗
10. [10] M. Kawasaki, T.G. Langdon: J. Mater. Sci., 2015, vol. 51, pp. 19-32.10.1007/s10853-015-9176-9 ↗
11. [11] S. Sabbaghianrad, T.G. Langdon: J. Mater. Sci., 2015, vol. 50, pp. 4357-4365.10.1007/s10853-015-8989-x ↗
12. [12] R. Jamaati, S. Amirkhanlou, M.R. Toroghinejad, B. Niroumand: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2143-2148.10.1016/j.msea.2010.11.056 ↗
13. [13] S. Amirkhanlou, R. Jamaati, B. Niroumand, M.R. Toroghinejad: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4462-4467.10.1016/j.msea.2011.02.037 ↗
14. [14] R. Jamaati, S. Amirkhanlou, M.R. Toroghinejad, B. Niroumand: J. Mater. Eng. Perform., 2012, vol. 21, pp. 1249-1253.10.1007/s11665-011-0045-7 ↗
15. [15] M.I. Latypov, M.G. Lee, Y.E. Beygelzimer, D. Prilepo, Y. Gusar, H.S. Kim: Metall. Mater. Trans. A, 2016, vol. 47, pp. 1248-1260.10.1007/s11661-015-3298-1 ↗
16. [16] Y. Zhang, S. Sabbaghianrad, H. Yang, T.D. Topping, T.G. Langdon, E.J. Lavernia, J.M. Schoenung, S.R. Nutt: Metall. Mater. Trans. A, 2015, vol. 46, pp. 5877-5886.10.1007/s11661-015-3151-6 ↗
17. [17] S. Amirkhanlou, M. Ketabchi, N. Parvin, S. Khorsand, R. Bahrami: Mater. Des., 2013, vol. 51, pp. 367-374.10.1016/j.matdes.2013.04.032 ↗
18. [18] S. Amirkhanlou, M. Ketabchi, N. Parvin, G. Drummen: Metall. Mater. Trans. B, 2014, vol. 45, pp. 1992-1999.10.1007/s11663-014-0129-5 ↗
19. [19] S. Amirkhanlou, M. Askarian, M. Ketabchi, N. Azimi, N. Parvin, F. Carreño: Mater. Charact., 2015, vol. 109, pp. 57-65.10.1016/j.matchar.2015.09.017 ↗
20. [20] S. Amirkhanlou, M. Ketabchi, N. Parvin, A. Orozco-Caballero, F. Carreño: Scripta Mater., 2015, vol. 100, pp. 40-43.10.1016/j.scriptamat.2014.12.007 ↗
21. [21] M. Rezayat, A. Akbarzadeh, A. Owhadi: Metall. Mater. Trans. A, 2012, vol. 43, pp. 2085-2093.10.1007/s11661-011-1039-7 ↗
22. [22] A. Ahmadi, M.R. Toroghinejad, A. Najafizadeh: Mater. Des., 2014, vol. 53, pp. 13-19.10.1016/j.matdes.2013.06.064 ↗
23. [23] S. Amirkhanlou, M. Ketabchi, N. Parvin, M. Askarian, F. Carreño: Mater. Sci. Eng. A, 2015, vol. 627, pp. 374-380.10.1016/j.msea.2015.01.025 ↗
24. [24] S. Amirkhanlou, M. Ketabchi, N. Parvin, S. Khorsand, R. Bahrami: Mater. Des., 2013, vol. 51, pp. 367-374.10.1016/j.matdes.2013.04.032 ↗
25. [25] A. Mishra, B. Kad, F. Gregori, M. Meyers: Acta Mater., 2007, vol. 55, pp. 13-28.10.1016/j.actamat.2006.07.008 ↗
26. [26] R. Jamaati, M.R. Toroghinejad, S. Amirkhanlou, H. Edris: Metall. Mater. Trans. A, 2015, vol. 46, pp. 4013-4019.10.1007/s11661-015-3001-6 ↗
27. [27] J. Robson, D. Henry, B. Davis: Acta Mater., 2009, vol. 57, pp. 2739-2747.10.1016/j.actamat.2009.02.032 ↗
28. [28] Y. Shen, R. Guan, Z. Zhao, R. Misra: Acta Mater., 2015, vol. 100, pp. 247-255.10.1016/j.actamat.2015.08.043 ↗
29. [29] R. Jamaati, M.R. Toroghinejad, S. Amirkhanlou, H. Edris: Mater. Sci. Eng. A, 2015, vol. 639, pp. 656-662.10.1016/j.msea.2015.05.075 ↗
30. [30] M. Alizadeh: J. Alloys Compd., 2011, vol. 509, pp. 2243-2247.10.1016/j.jallcom.2010.11.004 ↗
31. [31] J.G. Park, D.H. Keum, Y.H. Lee: Carbon, 2015, vol. 95, pp. 690-698.10.1016/j.carbon.2015.08.112 ↗
32. [32] S. Dong, J. Zhou, D. Hui, Y. Wang, S. Zhang: Composites Part A: Applied Science and Manufacturing, 2015, vol. 68, pp. 356-364.10.1016/j.compositesa.2014.10.018 ↗
33. [33] D. Cheng, J. Niu, Z. Gao, P. Wang: Mod. Phys. Lett. B, 2015, vol. 29, pp. 1540002.10.1142/S0217984915400023 ↗
34. [34] Z. Ni, H. Zhao, F. Ye: Vacuum, 2015, vol. 120, pp. 101-106.10.1016/j.vacuum.2015.06.031 ↗
35. [35] W. Kim, I. Park, S. Han: Scripta Mater., 2012, vol. 66, pp. 590-593.10.1016/j.scriptamat.2012.01.014 ↗
36. [36] F. Chen, Z. Chen, F. Mao, T. Wang, Z. Cao: Mater. Sci. Eng. A, 2015, vol. 625, pp. 357-368.10.1016/j.msea.2014.12.033 ↗
37. [37] W. Miller, F. Humphreys: Scripta metallurgica et materialia, 1991, vol. 25, pp. 33-38.10.1016/0956-716X(91)90349-6 ↗
38. [38] K. Edalati, D. Akama, A. Nishio, S. Lee, Y. Yonenaga, J.M. Cubero-Sesin, Z. Horita: Acta Mater., 2014, vol. 69, pp. 68-77.10.1016/j.actamat.2014.01.036 ↗
39. [39] S. Lee, Y. Saito, T. Sakai, H. Utsunomiya: Mater. Sci. Eng. A, 2002, vol. 325, pp. 228-235.10.1016/S0921-5093(01)01416-2 ↗
40. [40] R. Arsenault, N. Shi: Mater. Sci. Eng., 1986, vol. 81, pp. 175-187.10.1016/0025-5416(86)90261-2 ↗
41. [41] L. Jiang, H. Yang, J.K. Yee, X. Mo, T. Topping, E.J. Lavernia, J.M. Schoenung: Acta Mater., 2016, vol. 103, pp. 128-140.10.1016/j.actamat.2015.09.057 ↗
42. [42] L. Dai, Z. Ling, Y. Bai: Compos. Sci. Technol., 2001, vol. 61, pp. 1057-1063.10.1016/S0266-3538(00)00235-9 ↗
43. [43] Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai, R.G. Hong: Scripta Mater., 1998, vol. 39, pp. 1221-1227.10.1016/S1359-6462(98)00302-9 ↗
44. [44] S.H. Lee, Y. Saito, N. Tsuji, H. Utsunomiya, T. Sakai: Scripta Mater., 2002, vol. 46, pp. 281-285.10.1016/S1359-6462(01)01239-8 ↗
45. [45] N. Tsuji, Y. Ito, Y. Saito, Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893-899.10.1016/S1359-6462(02)00282-8 ↗
46. [46] T. Yu, N. Hansen, X. Huang: Acta Mater., 2013, vol. 61, pp. 6577-6586.10.1016/j.actamat.2013.07.040 ↗
47. [47] N. Hansen: Scripta Mater., 2004, vol. 51, pp. 801-806.10.1016/j.scriptamat.2004.06.002 ↗
48. [48] J.R. Bowen, P. Prangnell, D.J. Jensen, N. Hansen: Mater. Sci. Eng. A, 2004, vol. 387, pp. 235-239.10.1016/j.msea.2004.01.127 ↗
49. [49] N. Kamikawa, X. Huang, N. Tsuji, N. Hansen: Acta Mater., 2009, vol. 57, pp. 4198-4208.10.1016/j.actamat.2009.05.017 ↗
50. [50] Z. Zhang, D. Chen: Mater. Sci. Eng. A, 2008, vol. 483, pp. 148-152.10.1016/j.msea.2006.10.184 ↗
51. [51] J.-C. Lee, J.-Y. Byun, S.-B. Park, H.-I. Lee: Acta Mater., 1998, vol. 46, pp. 1771-1780.10.1016/S1359-6454(97)00265-6 ↗
52. [52] Z. Zhang, D. Chen: Scripta Mater., 2006, vol. 54, pp. 1321-1326.10.1016/j.scriptamat.2005.12.017 ↗
53. [53] C.-S. Kim, I. Sohn, M. Nezafati, J. Ferguson, B.F. Schultz, Z. Bajestani-Gohari, P.K. Rohatgi, K. Cho: J. Mater. Sci., 2013, vol. 48, pp. 4191-4204.10.1007/s10853-013-7232-x ↗
54. [54] S.A. Sajjadi, H. Ezatpour, M.T. Parizi: Mater. Des., 2012, vol. 34, pp. 106-111.10.1016/j.matdes.2011.07.037 ↗
55. [55] S. Amirkhanlou, B. Niroumand: Mater. Des., 2011, vol. 32, pp. 1895-1902.10.1016/j.matdes.2010.12.013 ↗
56. [56] C. Tekmen, I. Ozdemir, U. Cocen, K. Onel: Mater. Sci. Eng. A, 2003, vol. 360, pp. 365-371.10.1016/S0921-5093(03)00461-1 ↗
57. [57] F. Khodabakhshi, H.G. Yazdabadi, A. Kokabi, A. Simchi: Mater. Sci. Eng. A, 2013, vol. 585, pp. 222-232.10.1016/j.msea.2013.07.062 ↗
58. [58] C. Sun, M. Song, Z. Wang, Y. He: J. Mater. Eng. Perform., 2011, vol. 20, pp. 1606-1612.10.1007/s11665-010-9801-3 ↗
59. [59] B. Ogel, R. Gurbuz: Mater. Sci. Eng. A, 2001, vol. 301, pp. 213-220.10.1016/S0921-5093(00)01656-7 ↗