journal article·2014-10

Anisotropy and Asymmetry of Yield in Magnesium Alloys at Room Temperature

Joseph Robson

Publisher page

Abstract

Mechanical anisotropy and asymmetry are often pronounced in wrought magnesium alloys and are detrimental to formability and service performance. Single crystals of magnesium are highly anisotropic due to the large difference in critical resolved shear stress between the softest and hardest deformation modes. Polycrystalline magnesium alloys exhibit lower anisotropy, influenced by texture, solute level, and precipitates. In this work, a fundamental study of the effects of alloying, precipitate formation, and texture on the change in anisotropy and asymmetry from the pure magnesium single crystal case to polycrystalline alloys has been performed. It is demonstrated that much of the reduction in anisotropy and asymmetry arises from overall strengthening as solute, precipitates, and grain boundary effects are accounted for. Precipitates are predicted to be more effective than solute in reducing anisotropy and asymmetry, but shape and habit are critical since precipitates produce highly anisotropic strengthening. A small deviation from an ideal basal texture (15 deg spread) has a very strong effect in reducing anisotropy and asymmetry, similar in magnitude to the maximum effect produced by precipitation. Elasto-plastic modeling suggests that this is due to a contribution from basal slip to initial plastic deformation, even when global yield is not controlled by this mode.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. M.R. Barnett, N. Stanford, P. Cizek, A. Beer, Z. Xuebin, Z. Keshavarz, JOM 61, 19–24 (2009)10.1007/s11837-009-0115-6 ↗
2. W.B. Hutchinson, M.R. Barnett, Scripta Mater. 63, 737–740 (2010)10.1016/j.scriptamat.2010.05.047 ↗
3. K. Hantzsche, J. Bohlen, J. Wendt, K. Kainer, S. Yi, D. Letzig, Scripta Mater. 63, 725–730 (2010)10.1016/j.scriptamat.2009.12.033 ↗
4. J. Bohlen, M.R. Nürnberg, J.W. Senn, D. Letzig, S.R. Agnew, Acta Mater. 55, 2101–2122 (2007)10.1016/j.actamat.2006.11.013 ↗
5. S. Suwas, G. Gottstein, R. Kumar, Mater. Sci. Eng. A 471, 1–14 (2007)10.1016/j.msea.2007.05.030 ↗
6. A. Akhtar, E. Teghtsoonian, Acta Metall. 17, 1351–1356 (1969)10.1016/0001-6160(69)90152-7 ↗
7. A. Akhtar, E. Teghtsoonian, Phil. Mag. 25, 879–916 (1972)10.1080/14786437208229310 ↗
8. J.D. Robson, N. Stanford, M. Barnett, Acta Mater. 59, 1945–1956 (2011)10.1016/j.actamat.2010.11.060 ↗
9. J. Jain, W.J. Poole, C.W. Sinclair, M.A. Gharghouri, Scripta Mater. 62, 310–304 (2010)10.1016/j.scriptamat.2009.09.008 ↗
10. J.D. Robson, N. Stanford, M.R. Barnett, Metall. Mater. Trans. A 44, 2984–2995 (2013)10.1007/s11661-012-1466-0 ↗
11. A. Chapuis, J.H. Driver, Acta Mater. 59, 1986–1994 (2011)10.1016/j.actamat.2010.11.064 ↗
12. N. Stanford, G. Sha, J. Xia, S.P. Ringer, M.R. Barnett, Scripta Mater. 65, 919–921 (2011)10.1016/j.scriptamat.2011.08.012 ↗
13. N. Stanford, M.R. Barnett, Int. J. Plasticity 47, 165–181 (2013)10.1016/j.ijplas.2013.01.012 ↗
14. J.A. Yasi, L.G. Hector, D.R. Trinkle, Acta Mater. 58, 5704–5713 (2010)10.1016/j.actamat.2010.06.045 ↗
15. D.R. Trinkle, J.A. Yasi, and L.G. Hector: Proceedings 9th International Conference on Magnesium Alloys and their Applications, vol. 1, 2012, pp. 319–24.
16. J.A. Yasi, L.G. Hector, D.R. Trinkle, Acta Mater. 60, 2350–2358 (2012)10.1016/j.actamat.2012.01.004 ↗
17. S.R. Agnew, M.H. Yoo, C.N. Tomé, Acta Mater. 49, 4277–4289 (2001)10.1016/S1359-6454(01)00297-X ↗
18. S. Sandlöbes, M. Friák, J. Neugebauer, and D. Raabe: Mater. Sci. Eng. A, 2013, vol. 576, pp. 61–68.10.1016/j.msea.2013.03.006 ↗
19. J.W. Christian, S. Mahajan, Progress in Materials Science 39, 1–157 (1995)10.1016/0079-6425(94)00007-7 ↗
20. J.F. Nie, Metall. Mater. Trans. A 43, 3891–3939 (2012)10.1007/s11661-012-1217-2 ↗
21. J.F. Nie, Scripta Mater. 48, 1009–1015 (2003)10.1016/S1359-6462(02)00497-9 ↗
22. N. Stanford, M.R. Barnett, Mater. Sci. Eng. A 516, 226–234 (2009)10.1016/j.msea.2009.04.001 ↗
23. M.A. Gharghouri, G.C. Weatherly, J.D. Embury, Phil. Mag. A 78, 1137–1149 (1998)10.1080/01418619808239980 ↗
24. J. Jain, P. Cizek, W.J. Poole, M.R. Barnett, Acta Mater. 61, 4091–4102 (2013)10.1016/j.actamat.2013.03.033 ↗
25. S. Celotto, Acta Mater. 48, 1775–1787 (2000)10.1016/S1359-6454(00)00004-5 ↗
26. R. Kampmann, R. Wagner, Materials Science and Technology 5, 215–298 (1991)
27. J.D. Robson, Acta Mater. 61, 7781–7790 (2013)10.1016/j.actamat.2013.09.017 ↗
28. J.F. Nie, B.C. Muddle, Mater. Sci. Eng. A 319–321, 448–451 (2001)10.1016/S0921-5093(01)01054-1 ↗
29. M.R. Barnett, Scripta Mater. 59, 696–698 (2008)10.1016/j.scriptamat.2008.05.027 ↗
30. P.A. Turner, C.N. Tomé, Acta Metall. Mater. 42, 4143–4153 (1994)10.1016/0956-7151(94)90191-0 ↗
31. B. Clausen, C.N. Tomé, D.W. Brown, S.R. Agnew, Acta Mater. 56, 3699–3707 (2008)10.1016/j.actamat.2008.04.006 ↗
32. C.J. Neil, J.A. Wollmershauser, B. Clausen, C.N. Tomé, S.R. Agnew, Int. J. Plasticity 26, 1772–1791 (2010)10.1016/j.ijplas.2010.03.005 ↗
33. O. Muránsky, D.G. Carr, M.R. Barnett, E.C. Oliver, P. Šittner, Mater. Sci. Eng. A 496, 14–24 (2008)10.1016/j.msea.2008.07.031 ↗
34. H. Wang, B. Raeisinia, P.D. Wu, S.R. Agnew, C.N. Tomé, Int. J. Solids Structures 47, 2905–2917 (2010)10.1016/j.ijsolstr.2010.06.016 ↗