Modeling Grain Boundary Motion and Dynamic Recrystallization in Pure Metals
Source abstract
Abstract
The current study proposes a new approach of modeling discontinuous dynamic recrystallization in pure copper and cobalt based on the inverse analysis of experimental data. This approach comprises two steps: First, the mobility of grain boundaries is determined by a mean-field model in the steady state regime, then in a second step the information collected (mobility, nucleation frequency) is used to determine the mechanical behavior and the grain size change. The nucleation criterion is reformulated in a more general expression, and a new expression of the nucleation frequency with a single empirical parameter is proposed. The model predicts the stress–strain curves and the evolution of mean grain size, and is in good agreement with experimental data for both copper and cobalt. The modeling procedure requires a minimum of initial material parameters and could be especially attractive in the case of complex metals and alloys for which these parameters are unknown.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. T Sakai and JJ Jonas. Acta Metall, 32:189–209, 1984.10.1016/0001-6160(84)90049-X ↗
2. R Sandstrom and R Lagneborg. Acta Metall, 23:387–398, 1975.10.1016/0001-6160(75)90132-7 ↗
3. FJ Humphreys and M Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon, Oxford, 1995.
4. DG Cram, HS Zurob, Y Brechet, and CR Hutchinson. Acta Mater, 57:5218–5228, 2009.10.1016/j.actamat.2009.07.024 ↗
5. F Montheillet, O Lurdos, and G Damamme. Acta Mater, 57:1602–1612, 2009.10.1016/j.actamat.2008.11.044 ↗
6. B Derby. Acta Metall Mater, 39:955–962, 1991.10.1016/0956-7151(91)90295-C ↗
7. H Hallberg, M Wallin, and M Ristinmaa. Comp Mater Sci, 49:25–34, 2010.10.1016/j.commatsci.2010.04.012 ↗
8. UF Kocks and H Mecking. Progr Mater Sci, 48:171–273, 2003.10.1016/S0079-6425(02)00003-8 ↗
9. HS Zurob, Y Brechet, and J Dunlop. Acta Mater, 54:3983–3990, 2006.10.1016/j.actamat.2006.04.028 ↗
10. Y.V.R.K. Prasad and K.P. Rao: Mater. Sci. Eng. A, 2005, vol. 391, pp. 141–50.10.1016/j.msea.2004.08.049 ↗
11. R Kapoor, B Paul, S Raveendra, I Samajdar, and JK Chakravartty. Metall Mater Trans A, 40A:818– 827, 2009.10.1007/s11661-009-9782-8 ↗
12. YVRK Prasad and KP Rao. Materials Letters, 58:2061–2066, 2004.10.1016/j.matlet.2004.01.003 ↗
13. YVRK Prasad and KP Rao. Mater Sci Eng A, 374:335–341, 2004.10.1016/j.msea.2004.03.007 ↗
14. YVRK Prasad and KP Rao. Phil Mag, 84:3039–3050, 2004.10.1080/14786430410001716205 ↗
15. YVRK Prasad and KP Rao. Zeitschrift fur Metallkunde, 96:71–77, 2005.
16. YVRK Prasad and KP Rao. Trans ASME, 128:158–162, 2006.
17. B Paul, R Kapoor, JK Chakravartty, Bidaye AC, IG Sharma, and AK Suri. Scripta Mater, 60:104– 107, 2009.10.1016/j.scriptamat.2008.09.012 ↗
18. U.F. Kocks: Constitutive Behavior Based on Crystal Plasticity, Kluwer Academic Publishers, The Hague, 1987.10.1007/978-94-009-3439-9_1 ↗
19. PM Sargent, G Malakondaiah, and MF Ashby. Scripta Metall, 17:625–629, 1983.10.1016/0036-9748(83)90390-3 ↗
20. LF Bryant, R Speiser, and JP Hirth. Trans Metall Soc AIME, 242:1145–1148, 1968.
21. GI Taylor. Proc Roy Soc London A, 45:362–387, 1934.
22. O Bouaziz and P Buessler. Adv Eng Mater, 6:79–83, 2004.10.1002/adem.200300524 ↗
23. D Turnbull. Trans AIME, 191:661–665, 1951.
24. CR Hutchinson, HS Zurob, SW Sinclair, and Y Brechet. Scripta Mater, 59:635–637, 2008.10.1016/j.scriptamat.2008.05.036 ↗
25. F Lefevre-Schlick, Y Brechet, HS Zurob, G Purdy, and D Embury. Mater Sci Eng A, 502:70–78, 2009.10.1016/j.msea.2008.10.015 ↗
26. E.A. Holm, M.A. Miodownik, and A.D. Rollett: Acta Mater., 2003, vol. 51, pp. 2701–16.10.1016/S1359-6454(03)00079-X ↗
27. JE Bailey and PB Hirsch. Proc Roy Soc London A, 267:11–30, 1962.10.1098/rspa.1962.0080 ↗
28. T Sakai. J Mater Process Tech, 53:349–361, 1995.10.1016/0924-0136(95)01992-N ↗