journal article·2009-11

Bonding Mechanism from the Impact of Thermally Sprayed Solid Particles

S. Gu, S. Kamnis

Publisher page

Abstract

Power particles are mainly in solid state prior to impact on substrates from high velocity oxy-fuel (HVOF) thermal spraying. The bonding between particles and substrates is critical to ensure the quality of coating. Finite element analysis (FEA) models are developed to simulate the impingement process of solid particle impact on substrates. This numerical study examines the bonding mechanism between particles and substrates and establishes the critical particle impact parameters for bonding. Considering the morphology of particles, the shear-instability–based method is applied to all the particles, and the energy-based method is employed only for spherical particles. The particles are given the properties of widely used WC-Co powder for HVOF thermally sprayed coatings. The numerical results confirm that in the HVOF process, the kinetic energy of the particle prior to impact plays the most dominant role in particle stress localization and melting of the interfacial contact region. The critical impact parameters, such as particle velocity and temperature, are shown to be affected by the shape of particles, while higher impact velocity is required for highly nonspherical powder.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Particle Dynamics in Fluid Flows · Erosion and Abrasive Machining

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (33)

Show source-provided references
1. S. Gu, D.G. McCartney, C.N. Eastwick, and K.A. Simmons: J. Therm. Spray Technol., 2004, vol. 13, pp. 200–13.10.1361/10599630419337 ↗
2. S. Gu, C.N. Eastwick, K.A. Simmons, and D.G. McCartney: J. Therm. Spray Technol., 2001, vol. 10, pp. 461–69.10.1361/105996301770349231 ↗
3. S. Kamnis and S. Gu: Chem. Eng. Sci., 2006, vol. 61, pp. 5427–39.10.1016/j.ces.2006.04.005 ↗
4. S. Kamnis and S. Gu: Chem. Eng. Proc., 2006, vol. 45, pp. 246–53.10.1016/j.cep.2005.06.011 ↗
5. N. Zeoli, S. Gu, and S. Kamnis: Comp. Chem. Eng., 2008, vol. 32, pp. 1661–68.10.1016/j.compchemeng.2007.08.008 ↗
6. T.C. Hanson, C.M. Hackett, and G.S. Settles: J. Therm. Spray Technol., 2002, vol. 11, pp. 75–85.10.1361/105996302770349005 ↗
7. M. Cherigui, Z. Salhi, N.E. Fenineche, P. Gougeon, and C. Coddet: Mater. Lett., 2005, vol. 59, pp. 463–67.10.1016/j.matlet.2004.10.022 ↗
8. S. Kamnis, S. Gu, T.J. Lu, and C. Chen: Comp. Mater. Sci., 2008, vol. 43, pp. 1172–82.10.1016/j.commatsci.2008.03.015 ↗
9. S. Kamnis, S. Gu, and N. Zeoli: Surf. Coat. Technol., 2008, vol. 202, pp. 2715–24.10.1016/j.surfcoat.2007.10.006 ↗
10. N. Zeoli, S. Gu, and S. Kamnis: Int. J. Heat Mass Transfer, 2008, vols. 15–16, pp. 4121–31.10.1016/j.ijheatmasstransfer.2007.11.044 ↗
11. S. Kamnis and S. Gu: J. Phys. D: Appl. Phys., 2005, vol. 38, pp. 3664–73.10.1088/0022-3727/38/19/015 ↗
12. S. Kamnis and S. Gu: J. Phys. D: Appl. Phys., 2008, vol. 41, p. 165,303 (7 pp.).10.1088/0022-3727/41/16/165303 ↗
13. D.L. Gilmore, R.C. Dykhuizen, R.A. Neiser, T.J. Roemer, and M.F. Smith: J. Therm. Spray Technol., 1999, vol. 8, pp. 576–86.10.1361/105996399770350278 ↗
14. C.J. Li and W.Y. Li: Surf. Coat. Technol., 2003, vol. 167, pp. 278–83.10.1016/S0257-8972(02)00919-2 ↗
15. T.H. Van Steenkiste, J.R. Smith, and R.E. Teets: Surf. Coat. Technol., 2002, vol. 154, pp. 237–52.10.1016/S0257-8972(02)00018-X ↗
16. R.C. Dykhuizen, M.F. Smith, D.L. Gilmore, R.A. Neiser, X. Jiang, and S.J. Sampath: Therm. Spray Technol., 1999, vol. 8, pp. 559–67.10.1361/105996399770350250 ↗
17. M. Grujicic, J.R. Saylor, D.E. Beasley, W.S. DeRosset, and D. Helfritch: Appl. Surf. Sci., 2003, vol. 219, pp. 211–23.10.1016/S0169-4332(03)00643-3 ↗
18. M. Grujicic, C.L. Zhao, W.S. DeRosset, and D. Helfritch: Mater. Des., 2004, vol. 25, pp. 681–88.10.1016/j.matdes.2004.03.008 ↗
19. H. Assadi, F. Gartner, T. Stoltenhoff, and H. Kreye: Acta Mater., 2003, vol. 51, pp. 4379–94.10.1016/S1359-6454(03)00274-X ↗
20. T.W. Wright: Int. J. Plast., 1992, vol. 8, pp. 583–602.10.1016/0749-6419(92)90032-8 ↗
21. T.W. Wright: Mech. Mater., 1994, vol. 17, pp. 215–22.10.1016/0167-6636(94)90061-2 ↗
22. D.Y. Tzou: ASME J. Heat Transfer, 1995, vol. 117, pp. 8–16.10.1115/1.2822329 ↗
23. G.S. Prakash, S.S. Reddy, S.K. Das, T. Sundararajan, and K.N. Seetharamu: Num. Heat Transfer A, 2000, vol. 38, pp. 513–32.10.1080/104077800750020414 ↗
24. R. Kapoor and S. Nemat-Nasser: Mech. Mater., 1998, vol. 28, pp. 1–12.10.1016/S0167-6636(97)00036-7 ↗
25. E. Aldie and Jr. Johnson: Technical Note 3309, National Advisory Committee for Aeronautics, Washington, DC, 1954.
26. G.R. Johnson and W.H. Cook: Proc. 7th Int. Symp. on Ballistics, The Hague, The Netherlands, 1983, pp. 541–48.
27. W. Kohlhofer and R.K. Penny: Int. J. Press. Ves. Pip., 1996, vol. 66, pp. 333–39.10.1016/0308-0161(95)00107-7 ↗
28. R.B. Clough, S.C. Webb, and R.W. Armstrong: Mater. Sci. Eng. A, 2003, vol. 360, pp. 396–407.10.1016/S0921-5093(03)00499-4 ↗
29. J. Wu, H. Fang, S. Yoon, H. Kim, and C. Lee: Scripta Mater., 2006, vol. 54, pp. 665–69.10.1016/j.scriptamat.2005.10.028 ↗
30. Y.V. Kurochkin, Y.N. Demin, and S.I. Soldatenknov: Chem. Petrol. Eng., 2002, vol. 38, pp. 245–48.10.1023/A:1019637513791 ↗
31. B. Jodoin, L. Ajdelsztajn, E. Sansoucy, A. Zúñiga, P. Richer, and E.J. Lavernia: Surf. Coat Technol., 2006, vol. 201, pp. 3422–29.10.1016/j.surfcoat.2006.07.232 ↗
32. V. Mehdi-Nejad, J. Mostaghimi, and S. Chandra: Int. J. Comput. Fluid Dyn., 2005, vol. 19, pp. 105–13.10.1080/10618560410001729090 ↗
33. R. Ghafouri-Azar, S. Shakeri, S. Chandra, and J. Mostaghimi: Int. J. Heat Mass Transfer, 2003, vol. 46, pp. 1395–1407.10.1016/S0017-9310(02)00403-9 ↗