journal article·2008-05

Effect of Sc on Aging Kinetics in a Direct Chill Cast Al-Zn-Mg-Cu Alloy

O.N. Senkov, S.V. Senkova, M.R. Shagiev

Publisher page

Abstract

The effect of Sc additions on precipitation strengthening in a direct chill (DC) cast Al-Zn-Mg-Cu alloy was studied after natural and artificial aging. The microhardness, room temperature (RT) mechanical properties, and phase composition of the alloys were determined after different steps of aging. The strengthening mechanisms were discussed. It was shown that minor additions of Sc increased the strength of the Al-Zn-Mg-Cu alloy after casting and solution heat treatment, due to the precipitation of fine coherent Al3(Sc,Zr) particles. An analysis of the aging kinetics revealed that Sc had no effect on the natural aging, which was controlled by the formation and growth of Guinier–Preston (GP) I zones. On the other hand, the Sc additions accelerated the aging process at 120 °C and 150 °C within a period of time of the formation and growth of GP II zones and η′ particles. It was concluded that the presence of Sc accelerated the formation and growth of GP II zones in the Al-Zn-Mg-Cu alloys, which led to the earlier precipitation of the η′ phase. However, at longer aging times at 120 °C and 150 °C, the aging response of the Sc-containing alloys slowed down, due to faster coarsening of the η′ particles and their transformation into η particles. A model of the formation of vacancy-rich clusters (VRCs), precursors to GP zones, in the Al-Zn-Mg–based alloys was proposed. According to this model, the observed effects of Sc on aging are the result of the Sc-induced increase in the number density of the GP II clusters and the concentration of quenched-in solute-bound excess vacancies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. Properties of Aluminum Alloys: Tensile, Creep, and Fatigue Data at High and Low Temperatures, J.G. Kaufman, ed., ASM INTERNATIONAL, Materials Park, OH, 1999
2. Aluminum and Aluminum Alloys, J.R. Davis, ed., ASM INTERNATIONAL, Materials Park, OH, 1993
3. J.H. Auld, S.McK. Cousland: J. Austr. Inst. Met., 1974, vol. 19, pp. 194–99
4. F.A. Costello, J.D. Robson, P.B. Pragnell: Mater. Sci. Forum, 2002, vols. 396–402, pp. 757–6210.4028/www.scientific.net/MSF.396-402.757 ↗
5. P. Villars and L.D. Calvert: Pearson’s Handbook of Crystallographic Data for Intermetallic Phases, ASM INTERNATIONAL, Materials Park, OH, 1991, vols. 1–4
6. K. Stiller, P.J. Warren, V. Hansen, J. Angenete, J. Gjonnes: Mater. Sci. Eng., A, 1999, vol. A270, pp. 55–6310.1016/S0921-5093(99)00231-2 ↗
7. L.K. Berg, J. Gjonnes, V. Hansen, X.Z. Li, M. Knutson-Wedel, G. Waterloo, D. Schryvers, L.R. Wallenberg: Acta Mater., 2001, vol. 49, pp. 3443–5110.1016/S1359-6454(01)00251-8 ↗
8. T. Engdahl, V. Hansen, P.J. Warren, K. Stiller: Mater. Sci. Eng., A, 2002, vol. A327, pp. 59–6410.1016/S0921-5093(01)01876-7 ↗
9. V. Hansen, O.B. Karlsen, Y. Langsrud, J. Gjønnes: Mater. Sci. Technol., 2004, vol. 20, pp. 185–9310.1179/026708304225010424 ↗
10. G. Sha, A. Cerezo: Acta Mater., 2004, vol. 52, pp. 4503–1610.1016/j.actamat.2004.06.025 ↗
11. A. Dupasquier, R. Ferragut, M.M. Iglesias, M. Massazza, R. Riontino, P. Mengucci, G. Barucca, C.E. Macchi, A. Somoza: Philos. Mag., 2007, vol. 87, pp. 3297–332310.1080/14786430701271959 ↗
12. H. Löffler, I. Kovács, J. Lendvai: J. Mater. Sci., 1993, vol. 18, pp. 2215–4010.1007/BF00541825 ↗
13. X.Z. Li, V. Hansen, J. Gjønnes, R. Wallenderg: Acta Mater. 1999, vol. 47, pp. 2651–5910.1016/S1359-6454(99)00138-X ↗
14. Handbook of Aluminum, G.E. Totten and D.S. MacKenzie, eds., Marcel Dekker, Inc., New York, NY, 2003, vol. 1, pp. 284–89 and 916–20
15. X.J. Jiang, B. Noble, V. Hansen, J. Tafto: Metall. Mater. Trans. A, 2001, vol. 32, pp. 1063–7310.1007/s11661-001-0117-7 ↗
16. A.K. Mukhopadhyay, G.J. Shiflet, S.R. Starke: Scripta Mater., 1990, vol. 24, pp. 307–1210.1016/0956-716X(90)90261-E ↗
17. A.K. Mukhopadhyay, Q.B. Yang, S.B. Singh: Acta Metall. Mater., 1994, vol. 42, pp. 3083–9110.1016/0956-7151(94)90406-5 ↗
18. V.I. Elagin: Technology of Light Alloys, Tekhnologiya Legkikh Splavov, USSR, 1994, No. 9, pp. 5–14
19. V.I. Elagin, V.V. Zakharova, T.D. Rostova: Met. Sci. Heat Treat., 1995, vol. 36 (7–8), pp. 375–80
20. O.N. Senkov, R.B. Bhat, S.V. Senkova: in Metallic Materials with High Structural Efficiency, O.N. Senkov, D.B. Miracle, S.A. Firstov, eds., Kluwer Academic Publishers, Dordrecht, The Netherlands, 2004, pp. 151–6210.1007/1-4020-2112-7_15 ↗
21. Y.V. Milman, A.I. Sirko, D.V. Lotsko, D.B. Miracle, O.N. Senkov: Mater. Sci. Forum, 2002, vols. 396–402, pp. 1217–2210.4028/www.scientific.net/MSF.396-402.1217 ↗
22. A.F. Norman, K. Hyde, F. Costello, S. Thompson, S. Birley, P.B. Pragnell: Mater. Sci. Eng., A, 2003, vol. 354, pp. 188–9810.1016/S0921-5093(02)00942-5 ↗
23. O.N. Senkov, R.B. Bhat, S.V. Senkova, J.D. Schloz: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2115–2610.1007/s11661-005-0332-8 ↗
24. J. Royset, N. Ryum: Int. Mater. Rev., 2005, vol. 50, pp. 19–4410.1179/174328005X14311 ↗
25. O.N. Senkov: Advanced Aluminum Materials for Rocket Turbopump Rotors, SBIR Phase II Final Report, AFRL-PR-ED-TR-2006-0073, U.S. Air Force Research Laboratory, Edwards Air Force Base, CA, 2006, pp. 205–30
26. O.N. Senkov, S.V. Senkova, M.G. Mendiratta, and D.B. Miracle: U.S. Patent 7,048,815, 2006
27. O.N. Senkov, S.V. Senkova, M.G. Mendiratta, D.B. Miracle, Y.V. Milman, D.V. Lotsko, and A.I. Sirko: U.S. Patent 7,060,139, 2006
28. L.I. Kaigorodova, E.I. Selnikhina, E.A. Tkachenko, O.G. Senatorova: Phys. Met. Metall., 1996, vol. 81, pp. 513–19
29. Y.L. Wu, F.H. Froes, C. Li, A. Alvarez: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1017–2410.1007/s11661-999-0154-1 ↗
30. D.B. Williams, C.B. Carter: Transmission Electron Microscopy, Plenum Press, New York, NY, 1996, pp. 629–3010.1007/978-1-4757-2519-3 ↗
31. S. Iwamura, Y. Miura: Acta Mater., 2004, vol. 52, pp. 591–60010.1016/j.actamat.2003.09.042 ↗
32. R. DeIasi, P.N. Adler: Metall. Trans. A, 1977, vol. 8A, pp. 1177–83
33. P.H. Adler, R. DeIasi: Metall. Trans. A, 1977, vol. 8A, pp. 1185–9010.1007/BF02667404 ↗
34. J.M. Papazian, R.J. DeIasi, P.N. Adler: Metall. Trans. A, 1980, vol. 11A, pp. 135–4010.1007/BF02700448 ↗
35. J.M. Papazian: Metall. Trans. A, 1982, vol. 13A, pp. 761–6910.1007/BF02642389 ↗
36. A. Deschamps, F. Livet, Y. Brechet: Acta Mater., 1999, vol. 47, pp. 281–9210.1016/S1359-6454(98)00293-6 ↗
37. Y.H. Zhao, X.Z. Liao, Z. Jin, R.Z. Valiev, Y.T. Zhu: Acta Mater., 2004, vol. 51, pp. 4589–9910.1016/j.actamat.2004.06.017 ↗
38. PANDAT™, Version 5.0, CompuTherm, LLC, Madison, WI
39. O.N. Senkov and M.R. Shaghiev: UES, Inc., Dayton, Ohio, unpublished research, 2006
40. B.L. Ou, J.G. Yang, M.Y. Wei: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1760–7310.1007/s11661-007-9200-z ↗
41. S. Iwamura, Y. Miura: Acta Mater., 2004, vol. 52, pp. 591–60010.1016/j.actamat.2003.09.042 ↗
42. J. Murray, A. Peruzzi, J.P Abriata: J. Phase Equilib., 1992, vol. 13, pp. 277–9110.1007/BF02667556 ↗
43. H.H. Jo, S.I. Fujikawa: Mater. Sci. Eng. 1993, vol. A171, pp. 151–6110.1016/0921-5093(93)90401-Y ↗
44. J. Burke: J. Less Common Met., 1972, vol. 28, pp. 441–5610.1016/0022-5088(72)90137-3 ↗
45. S. Özbilen, H.M. Flower: Acta Metall., 1989, vol. 37, pp. 2993–300010.1016/0001-6160(89)90335-0 ↗
46. R.O. Simmons, R.W. Balluffi: Phys. Rev., 1960, vol. 117, pp. 52–6110.1103/PhysRev.117.52 ↗
47. Y. Miura, C. Joh, T. Katsube: Mater. Sci. Forum, 2000, vols. 331–337, pp. 1031–3610.4028/www.scientific.net/MSF.331-337.1031 ↗
48. O. Kubaschewski, C.B. Alcock, P.J. Spencer: Materials Thermochemistry, 6th ed., Pergamon Press, Oxford, United Kingdom, 1993
49. J.D. Eshelby: in Solid State Physics, F. Seitz and D. Turnbull, eds., Academic Press, New York, NY, 1956, vol. 3, pp. 77–144
50. S.K. Maloney, K. Hono, I.J. Polmear, S.P. Ringer: Scripta Mater. 1999, vol. 41, pp. 1031–3810.1016/S1359-6462(99)00253-5 ↗