journal article·2008-10

On Factors Affecting the Phase Transformation and Mechanical Properties of Cold-Rolled Transformation-Induced-Plasticity–Aided Steel

Mohamed Soliman, Heinz Palkowski

Publisher page

Abstract

Two Mo-Nb microalloyed transformation-induced-plasticity (TRIP) steels, with Al contents of 0.23 and 0.65, were subjected to several hot-rolling conditions designed to generate different ferrite morphologies and grain sizes. These structures were then cold rolled and TRIP annealed under different heat-treatment conditions. To further develop TRIP steel in terms of strength and ductility, stabilizing retained austenite by isothermal bainitic transformation was studied in detail. Microstructure observation and tensile tests were conducted, and volume fractions of retained austenite were measured. It was observed that increasing the aluminum content enhances the transformation rate and increases the total amount of bainite fraction at the expense of retained austenite. The latter effect enhances formability by increasing ductility. Furthermore, it was observed that the hot-rolling schedule, prior to cold rolling and heat treatment, has a decisive effect on structure refinement, which enhances the strength-ductility balance of the final product. To study the transformation behavior, dilatometer testing was conducted under conditions similar to that of the heat treatment. Thermodynamic calculations were used to verify the results.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. V.F. Zackay, E.R. Parker, D. Fahr, R. Busch: Trans. ASM, 1967, vol. 60, pp. 252–59
2. O. Matsumura, Y. Sakuma, H. Takechi: Iron Steel Inst. Jpn., 1987, vol. 27, pp. 570–7910.2355/isijinternational1966.27.570 ↗
3. W.C. Jeong and J.H. Chung: HSLA Steels: Processing, Properties and Applications, TMS, Warrendale, PA, 1992, pp. 305–11
4. J. Maki, J. Mahieu, B.C. De Cooman, S. Claessens: Mater. Sci. Technol., 2003, vol. 19, pp. 125–3110.1179/026708303225009300 ↗
5. L. Tosal-Martiez, D. Vanderschueren, S. Jacobs, S. Vandeputte: Steel Res., 2001, vol. 72 (10), pp. 412–1510.1002/srin.200100143 ↗
6. E. Girault, A. Metens, P. Jacques, Y. Houbaert, B. Verlinden, J. Van Humbeeck: Scripta Mater., 2001, vol. 44, pp. 885–9210.1016/S1359-6462(00)00697-7 ↗
7. P.J. Jacques, E. Girault, A. Mertens, B. Verlinden, J. van Humbeek, F. Delannay: ISIJ Int., 2001, vol. 41, pp. 1068–7410.2355/isijinternational.41.1068 ↗
8. M. De Meyer, D. Vanderschueren, B.C. De Cooman: ISIJ Int., 1999, vol. 39, pp. 813–2210.2355/isijinternational.39.813 ↗
9. W. Bleck, E. Kechagias, J. Ohlert, J. Christen, A. Moulin, H. Hofmann, and T.W. Schaumann: Optimisation of Microstructure in Multiphase Steels Containing Retained Austenite, Final Report, Technical Steel Research Series, RFCS Publications, Luxembourg, 2004, pp. 29–73
10. E. Emadoddin, A. Akbarzadeh, G. Daneshi: Mater. Charact., 2006, vol. 57, pp. 408–1310.1016/j.matchar.2006.04.006 ↗
11. W. Bleck: Proc. Int. Conf. TRIP-Aided High Strength Ferrous Alloys, Gent, Steel GRIPS, Bad Harzburg, Germany, 2002, pp. 13–23
12. M. Bouet, J. Root, E. Es-Sadiqi, S. Yue: Mater. Sci. Forum, 1998, vols. 284–286, pp. 319–2610.4028/www.scientific.net/MSF.284-286.319 ↗
13. S. Jiao, F. Hassani, R.L. Donaberger, E. Essadiqi, S. Yue: ISIJ Int., 2002, vol. 42, pp. 299–30310.2355/isijinternational.42.299 ↗
14. C. Capdevila, F.G. Caballero, C. García De Andrés: ISIJ Int., 2005, vol. 45, pp. 238–4710.2355/isijinternational.45.238 ↗
15. Quantitative Measurement and Reporting of Hypoeutectoid Carbon and Low-Alloy Steel Phase Transformations, ASTM Standard A-1033-04, ASTM, Philadelphia, PA, 2004
16. E. Girault, P. Jacques, P. Harlet, K. Mols, J. Van Humbeeck, E. Aernoudt, F. Delannay: Mater. Charact., 1998, vol. 40, pp. 111–1810.1016/S1044-5803(97)00154-X ↗
17. F.S. LePera: J. Met., 1980, vol. 32, pp. 38–39
18. E. Wirthl, A. Pichler, R. Angerer, P. Stiaszny, K. Hauzenberger, Y.F. Titovets, and M. Hackl: Proc. Int. Conf. TRIP-Aided High Strength Ferrous Alloys, Gent, Steel GRIPS, Bad Harzburg, Germany, 2002, pp. 61–64
19. J.Z. Zhao, C. Mesplont, B.C. De Cooman: ISIJ Int., 2001, vol. 41, pp. 492–9710.2355/isijinternational.41.492 ↗
20. L.P. Karjalainen, T.M. Maccagno, J.J. Jonas: ISIJ Int., 1995, vol. 35, pp. 1523–3110.2355/isijinternational.35.1523 ↗
21. D.Q. Bai, S. Yue, W.P. Sun, J.J. Jonas: Metall. Trans. A, 1993, vol. 24A, pp. 2151–5910.1007/BF02648589 ↗
22. H. Palkowski, M. Soliman, and G. Kugler: Proc. TMS Ann. Mtg. Exhib., Orlando, FL, TMS, Warrendale, PA, 2007
23. X.D. Wang, B.X. Hunag, L. Wang, Y.H. Rong: Metall. Trans. A, 2008, vol. 39A, pp. 1–710.1007/s11661-007-9366-4 ↗
24. B. Dutta, C.M. Seller: Mater. Sci. Technol., 1987, vol. 3, pp. 197–20710.1179/mst.1987.3.3.197 ↗
25. L.P. Karjalainen: Mater. Sci. Technol., 1995, vol. 11, pp. 557–6510.1179/mst.1995.11.6.557 ↗
26. R.W. Cahn, P. Haasan: Physical Metallurgy, 4th ed., North-Holland, Amsterdam, Netherlands, 1996, p. 1601
27. H.K.D.H. Bhadeshia: Bainite in Steel, 2nd ed., IOM Commercial, Ltd., London, 2001, pp. 122–26
28. J.R. Bradley, J.M. Rigsbee, H.I. Aaronson: Metall. Trans. A, 1977, vol. 8A, pp. 323–3310.1007/BF02661647 ↗
29. H. Beladi, G.L. Kelly, A. Shokouhi, and P.D. Hodgson: Mater. Sci. Eng. A, 2004, vol. 371A, 343–5210.1016/j.msea.2003.12.024 ↗
30. J.B. Qu, Y.Y. Shan, M.C. Zhao, K. Yang: Mater. Sci. Technol., 2002, vol. 18, pp. 145–5010.1179/026708301125000357 ↗
31. B. Eghbali, A. Abdollah-zadeh: J. Mater. Process. Technol., 2006, vol. 180, pp. 44–4810.1016/j.jmatprotec.2006.04.018 ↗
32. F.C. García de Andrés, F.G. Caballero, C. Capdevila, L.F. Alvarez: Mater. Charact., 2002, vol. 48, pp. 101–1110.1016/S1044-5803(02)00259-0 ↗
33. W.C. Jeong, C.H. Kim: J. Mater. Sci., 1985, vol. 20, pp. 4392–9810.1007/BF00559327 ↗
34. M. De Meyer, J. Mahieu, B.C. De Cooman: Mater. Sci. Technol., 2002, vol. 18, pp. 1121–3210.1179/026708302225006115 ↗
35. M. Soliman, H. Palkowski: ISIJ Int., 2007, vol. 47, 1703–1010.2355/isijinternational.47.1703 ↗
36. M.D. Geib, D.K. Matlok, G. Krauss: Metall. Trans. A, 1980, vol. 11, pp. 1683–8910.1007/BF02660523 ↗
37. M.K. Manna, P.C. Chakraborti: Trans. Ind. Inst. Met., 2004, vol. 57, pp. 149–56
38. J. Ohlert, W. Bleck, and K. Hulka: Proc. Int. Conf. TRIP-Aided High Strength Ferrous Alloys, Gent, Steel GRIPS, Bad Harzburg, Germany, 2002, pp. 199–206
39. W. Shi, L. Li, C. Yang, R. Fu, L. Wang, P. Wollants: Mater. Sci. Eng., A, 2006, vol. 429, pp. 247–5110.1016/j.msea.2006.05.069 ↗
40. R. Petrov, L. Kestens, Y. Houbaert: ISIJ Int., 2001, vol. 41, pp. 883–9010.2355/isijinternational.41.883 ↗
41. Y. Sakuma, D.K. Matlock, G. Krauss: Metall. Trans. A, 1992, vol. 23A, pp. 1221–3210.1007/BF02665053 ↗
42. S. Hashimoto, S. Ikeda, K. Sugimoto, S. Miyake: ISIJ Int., 2004, vol. 44, pp. 1590–9810.2355/isijinternational.44.1590 ↗
43. S. Traint, A. Pichler, K. Hauzenberger, P. Stiaszny, and E. Werner: Proc. Int. Conf. TRIP-Aided High Strength Ferrous Alloys, Gent, Steel GRIPS, Bad Harzburg, Germany, 2002, pp. 121–27
44. S.-J. Kim, C.-G. Lee, I. Choi, S. Lee: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 505–1410.1007/s11661-001-0067-0 ↗
45. H. Matsuda, H.K.D.H. Bhadeshia: Proc. R. Soc. London, Ser. A, 2004, vol. 460, pp. 1707–2210.1098/rspa.2003.1225 ↗
46. P. Jacques: Curr. Opin. Solid State Mater. Sci.., 2004, vol. 8, pp. 259–6510.1016/j.cossms.2004.09.006 ↗
47. G.I. Rees, H.K.D.H. Bhadeshia: Mater. Sci. Technol., 1992, vol. 8, pp. 985–9310.1179/mst.1992.8.11.985 ↗
48. K. Sugimoto, T. Muramatsu, S. Hashimoto, Y. Mukaid: J. Mater. Process. Technol., 2006, vol. 177, pp. 390–9510.1016/j.jmatprotec.2006.03.186 ↗
49. L.B. Timokhina, P.D. Hodgson, E.V. Pereloma: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2331–4210.1007/s11661-006-0213-9 ↗
50. L. Barbé, L. Tosal-Martínez, and B.C. De Cooman: Proc. Int. Conf. TRIP-Aided High Strength Ferrous Alloys, Gent, Steel GRIPS, Bad Harzburg, Germany, 2002, pp. 147–51
51. M.L. Brandt, G.B. Olson: Ironmaking Steelmaking, 1993, vol. 20 (5), pp. 55–60
52. Y. Sakuma, D.K. Matlock, G. Krauss: Metall. Trans. A, 1992, vol. 23, pp. 1233–4110.1007/BF02665054 ↗