journal article·2009-12

Plastic Flow Properties and Microstructural Evolution in an Ultrafine-Grained Al-Mg-Si Alloy at Elevated Temperatures

B.P. Kashyap, P.D. Hodgson, Y. Estrin, I. Timokhina, M.R. Barnett, I. Sabirov

Publisher page

Abstract

An AA6082 alloy was subjected to eight passes of equal channel angular pressing at 100 °C, resulting in an ultrafine grain size of 0.2 to 0.4 μm. The tensile deformation behavior of the material was studied over the temperature range of 100 °C to 350 °C and strain rate range of 10−4 to 10−1 s−1. The evolution of microstructure under tensile deformation was investigated by analyzing both the deformation relief on the specimen surface and the dislocation structure. While extensive microshear banding was found at the lower temperatures of 100 °C to 150 °C, deformation at higher temperatures was characterized by cooperative grain boundary sliding and the development of a bimodal microstructure. Dislocation glide was identified as the main deformation mechanism within coarse grains, whereas no dislocation activity was apparent in the ultrafine grains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metallurgy and Material Forming · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. E.W. Lee and T.R. McNelley: Mater. Sci. Eng., 1987, vol. 96, pp. 253–58.10.1016/0025-5416(87)90558-1 ↗
2. P.K. Chaudhury and F.A. Mohamed: Metall. Trans. A, 1987, vol. 18A, pp. 2105–12.10.1007/BF02647082 ↗
3. P.K. Chaudhury and F.A. Mohamed: Mater. Sci. Eng. A, 1988, vol. 101, pp. 13–23.10.1016/0025-5416(88)90787-2 ↗
4. M. Cabibbo, C. Scalabroni, and E. Evangelista: Metall. Sci. Technol., 2006, vol. 24, pp. 31–40.
5. L.P. Troeger and E.A. Starke: Mater. Sci. Eng. A, 2000, vol. 293, pp. 19–29.10.1016/S0921-5093(00)01235-1 ↗
6. L.P. Troeger and E.A. Starke: Mater. Sci. Eng. A, 2000, vol. 277, pp. 102–13.10.1016/S0921-5093(99)00543-2 ↗
7. D.G. Morris, I. Gutierrez-Urrutia, and M.A. Muñoz-Morris: J. Mater. Sci., 2007, vol. 42, pp. 1439–43.10.1007/s10853-006-0564-z ↗
8. I.J. Polmear: Light Alloys—Metallurgy of the Light Metals, Arnold, London, 1995.
9. J. Mao, T. Imai, S. Dong, N. Saito, I. Shigematsu, S. Kojima, and T. Ishikawa: Scripta Mater., 2003, vol. 49, pp. 1061–66.10.1016/j.scriptamat.2003.08.017 ↗
10. W.J. Kim, S.H. Hong, and J.H. Lee: Mater. Sci. Eng., A., 2001, vol. 298, pp. 166–73.10.1016/S0921-5093(00)01341-1 ↗
11. M. Mabuchi and K. Higashi: Scripta Mater., 1996, vol. 34, pp. 1893–97.10.1016/1359-6462(96)00069-3 ↗
12. T.G. Nieh, T. Imai, J. Wadsworth, and S. Kojima: Scripta Metall. Mater., 1994, vol. 31, pp. 1685–90.10.1016/0956-716X(94)90464-2 ↗
13. G.W. Nieman, J.R. Weertman, and R.W. Siegel: Nanostr. Mater., 1992, vol. 1, pp. 185–90.10.1016/0965-9773(92)90074-8 ↗
14. G.W. Nieman, J.R. Weertman, and R.W. Siegel: Scripta Metall. Mater., 1990, vol. 24, pp. 145–50.10.1016/0956-716X(90)90582-2 ↗
15. S.R. Agnew, B.R. Elliott, C.J. Youngdahl, K.J. Hemker, and J.R. Weertman: Mater. Sci. Eng. A, 2000, vol. 285, pp. 391–96.10.1016/S0921-5093(00)00669-9 ↗
16. R.Z. Valiev, A.V. Korznikov, and R.R. Mulyukov: Mater. Sci. Eng. A, 1993, vol. 168, pp. 141–48.10.1016/0921-5093(93)90717-S ↗
17. M.G. Zelin and A.K. Mukherjee: Acta Metall. Mater., 1995, vol. 43, pp. 2359–72.10.1016/0956-7151(94)00428-5 ↗
18. Z. Horita, M. Furukawa, M. Nemoto, A.J. Barnes, and T.G. Langdon: Acta Mater., 2000, vol. 48, pp. 3633–40.10.1016/S1359-6454(00)00182-8 ↗
19. J.R. Weertman: Mater. Sci. Eng. A, 1993, vol. 166, pp. 161–67.10.1016/0921-5093(93)90319-A ↗
20. S.X. McFadden, R.S. Mishra, R.Z. Valiev, A.P. Zhilyaev, and A.K. Mukherjee: Nature, 1999, vol. 398, pp. 684–86.10.1038/19486 ↗
21. I. Sabirov, Y. Estrin, M.R. Barnett, I. Timokhina, and P.D. Hodgson: Scripta Mater., 2008, vol. 58, pp. 163–66.10.1016/j.scriptamat.2007.09.057 ↗
22. I. Sabirov, M.R. Barnett, Y. Estrin, and P.D. Hodgson: Scripta Mater., 2009, vol. 61, pp. 181–84.10.1016/j.scriptamat.2009.03.032 ↗
23. Y. Huang and T.G. Langdon: Mater. Sci. Eng. A, 2003, vol. 358, pp. 114–21.10.1016/S0921-5093(03)00268-5 ↗
24. I. Sabirov, Y. Estrin, M.R. Barnett, I. Timokhina, and P.D. Hodgson: Acta Mater., 2008, vol. 56, pp. 2223–30.10.1016/j.actamat.2008.01.020 ↗
25. N.Q. Chinh, P. Szommer, Z. Horita, and T.G. Langdon: Adv. Mater., 2006, vol. 18, pp. 34–40.10.1002/adma.200501232 ↗
26. R.Z. Valiev and T.G. Langdon: Prog. Mater. Sci., 2006, vol. 51, pp. 881–981.10.1016/j.pmatsci.2006.02.003 ↗
27. R.Z. Valiev, R.K. Islamgaliev, and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103–89.10.1016/S0079-6425(99)00007-9 ↗
28. M.A. Meyers, A. Mishra, and D.J. Benson: Prog. Mater. Sci., 2006, vol. 51, pp. 427–556.10.1016/j.pmatsci.2005.08.003 ↗
29. A.P. Zhilyaev and T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp. 893–979.10.1016/j.pmatsci.2008.03.002 ↗
30. P.B. Hirsch, R.B. Nicholson, A. Howie, D.W. Pashley, and M.J. Whelan: Electron Microscopy of Thin Crystals, Butterworth and Co., London, 1965.
31. T. Hebesberger, H.P. Stüwe, A. Vorhauer, F. Wetscher, and R. Pippan: Acta Mater., 2005, vol. 53, pp. 393–402.10.1016/j.actamat.2004.09.043 ↗
32. S.Y. Mironov, G.A. Salishchev, M.M. Myshlyaev, and R. Pippan: Mater. Sci. Eng. A, 2006, vol. 418, pp. 257–67.10.1016/j.msea.2005.11.026 ↗
33. R.Z. Valiev, V.Y. Gertsman, and O.A. Kaibyshev: Phys. Status Solidi A, 1986, vol. 97, pp. 11–56.10.1002/pssa.2210970102 ↗
34. L. Lodgaard and N. Ryum: Mater. Sci. Eng. A, 2000, vol. 283, pp. 144–52.10.1016/S0921-5093(00)00734-6 ↗
35. H. Hirasawa: Scripta Metall., 1975, vol. 9, pp. 955–58.10.1016/0036-9748(75)90551-7 ↗
36. E. Cerri and P. Leo: Mater. Sci. Eng. A, 2005, vols. 410–411, pp. 226–29.10.1016/j.msea.2005.08.135 ↗
37. R. Islamgaliev, N. Yunusova, I. Sabirov, A. Sergueeva, and R. Valiev: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 877–81.10.1016/S0921-5093(01)01052-8 ↗
38. D. Caillard and J.L. Martin: Thermally Activated Mechanisms in Crystal Plasticity, Pergamon Materials Series, Elsevier, Oxford, United Kingdom, 2003, vol. 8.
39. R.W. Hayes, D. Witkin, F. Zhou, and E.J. Lavernia: Acta Mater., 2004, vol. 52, pp. 4259–71.10.1016/j.actamat.2004.05.042 ↗
40. S.S. Kim, M.J. Haynes, and R.P. Gangloff: Mater. Sci. Eng. A, 1995, vol. 203, pp. 256–71.10.1016/0921-5093(95)09844-5 ↗
41. D. Jia, K.T. Ramesh, and E. Ma: Acta Mater., 2003, vol. 51, pp. 3495–3509.10.1016/S1359-6454(03)00169-1 ↗
42. A. Vinogradov, S. Hashimoto, V. Patlan, and K. Kitagawa: Mater. Sci. Eng. A, 2001, vols. 319–321, pp. 862–66.10.1016/S0921-5093(01)01057-7 ↗
43. Y. Ivanisenko, L. Kurmanaeva, J. Weissmueller, K. Yang, J. Markmann, H. Rösner, T. Scherer, and H.J. Fecht: Acta Mater., 2009, vol. 57, pp. 3391–3401.10.1016/j.actamat.2009.03.049 ↗
44. R. Kaibyshev, O. Sitdikov, I. Mazurina, and D.R. Lesuer: Mater. Sci. Eng. A, 2002, vol. 334, pp. 104–13.10.1016/S0921-5093(01)01777-4 ↗
45. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1982.
46. J.R. Weertman: J. Appl. Phys., 1957, vol. 28, pp. 362–66.10.1063/1.1722747 ↗
47. H. Van Swygenhoven and J.R. Weertman: Mater. Today, 2006, vol. 9, pp. 24–31.10.1016/S1369-7021(06)71494-8 ↗
48. I. Charit and R.S. Mishra: Acta Mater., 2005, vol. 53, pp. 4211–23.10.1016/j.actamat.2005.05.021 ↗
49. N. Balasubramanian and T.G. Langdon: Mater. Sci. Eng. A., 2005, vols. 410–411, pp. 476–79.10.1016/j.msea.2005.08.090 ↗
50. A. Tikhonovsky, M. Bartsch, and U. Messerschmidt: Phys. Status Solidi, 2004, vol. 201, pp. 26–45.10.1002/pssa.200306715 ↗
51. U.F. Kocks: Encyclopedia of Materials: Science and Technology, Elsevier, Oxford, 2008, pp. 7084–88.