journal article·2013-03

Hot Deformation of AA6082 Containing Fine Intermetallic Particles

Cecilia Poletti, Tomasz Wójcik, Christof Sommitsch

Publisher page

Abstract

Hot deformation of AA6082 aluminum alloy was studied by compression tests carried out between 573 K and 823 K (300 °C and 550 °C) under a wide range of strain rates. Light optical and scanning electron microscopy were used to study the as-received microstructure, which consisted of elongated, partially recrystallized grains containing fine Mg2Si and AlFeMnSi particles. The hot-deformed material showed the effects of dynamic recovery, i.e., small low angle grain boundary formation and dislocation pinning by fine particles. The flow data were used to calculate the constitutive equations, obtaining high values of n exponent. This behavior was attributed to the interaction of particles with dislocations during hot deformation. Threshold stresses were introduced to adjust the constitutive equation to a n exponent value of 5 at high stresses and a value of 3 in the low stresses range, which was related to dislocations’ climbing and sliding and thus to dynamic recovery. The threshold values were related to the detachment stresses in close connection with the precipitation state which was a function of the deformation temperature.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (43)

Show source-provided references
1. G. Mromka-Nowotnik and J. Sieniawski: J. Mater. Process. Technol., 2005, vol. 162–163, pp. 367–72.10.1016/j.jmatprotec.2005.02.115 ↗
2. H. J. McQueen and W. Blum: Mater. Sci. Eng. A, 2000, vol. 290, pp. 95–107.10.1016/S0921-5093(00)00933-3 ↗
3. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd ed., Pergamon, Oxford, 2004, p. 416.10.1016/B978-008044164-1/50016-5 ↗
4. H.J. McQueen, O. Knustad, N. Ryum, and J.K. Solberg: Scripta Metall., 1985, vol. 19, pp. 73–78.10.1016/0036-9748(85)90268-6 ↗
5. J.K. Solberg, H.J. McQueen, N. Ryum, and E. Nes: Philos. Mag. A, 1989, vol. 60, pp. 447–71.10.1080/01418618908213872 ↗
6. M.D Drury and F.J. Humphreys: Acta Metall., 1986, vol. 34, pp. 2259–71.10.1016/0001-6160(86)90171-9 ↗
7. M.J. Jones and F.J. Humphreys: Acta Mater., 2003, vol. 51, pp. 2149–59.10.1016/S1359-6454(03)00002-8 ↗
8. Z. Yanga, J.P. Li, J.X. Zhang, Y.C. Guo, B.W. Wang, F. Xia, and M.X. Liang: Mater. Sci. Eng. A, 2009, vol. 515, pp. 102–07.10.1016/j.msea.2009.03.060 ↗
9. A. Güzel, A. Jäger, F. Parvizian, H. G. Lambers, A.E. Tekkaya, B. Svendsen, and H.J. Maier: J. Mater. Process. Technol., 2012, vol. 212, pp. 323–30.10.1016/j.jmatprotec.2011.09.018 ↗
10. C.M. Sellars and W.J. McG. Tegart: Acta Metall., 1966, vol. 14, pp. 1136–1138.10.1016/0001-6160(66)90207-0 ↗
11. S. Spigarelli: Mater. Sci. Eng. A, 2002, vol 337, pp. 306–14.10.1016/S0921-5093(02)00045-X ↗
12. W. Blum, Q. Zhu, R. Merke, and H.J. McQueen: Mater. Sci. Eng. A., vol 205, 1996, pp. 23–30.10.1016/0921-5093(95)09990-5 ↗
13. K.T. Park, H. J. Lee, C. S. Lee, B. D. Ahn, H. S. Cho, D. H. Shin: Mater. Trans., vol. 45, 2004, pp. 958–63.10.2320/matertrans.45.958 ↗
14. P. Yavari, F. A. Mohamed, T. G. Langdon: Acta Metall., 1981, vol. 29, pp. 1495–1507.10.1016/0001-6160(81)90184-X ↗
15. N.E. Dowling: Engineering Methods for Deformation, Fracture and Fatigue, 3rd ed., Pearsons Prentice Hall, Upper Saddle River, 2007.
16. O.D. Sherby. R. H. Klundt, and A.K. Miller: Metall. Trans. A, 1977, vol. 8A, pp. 843–5010.1007/BF02661565 ↗
17. S. Ranganath and R. S. Mishra: Acta Mater, 1996, vol. 44, pp. 927–3510.1016/1359-6454(95)00242-1 ↗
18. C. Poletti, M. Rodriguez-Hortalá, M. Hauser, C. Sommitsch: Mater. Sci. Eng A, 2011, vol. 528A, pp. 2423–30.10.1016/j.msea.2010.11.048 ↗
19. F. Warchomicka, C. Poletti, M. Stockinger, and H.P. Degischer: Mater. Sci. Forum, 2012, vols. 706–709, pp. 252–57.10.4028/www.scientific.net/MSF.706-709.252 ↗
20. F. J. Humphreys: J. Mat. Sci., vol. 30, 2001, pp. 3833–54.10.1023/A:1017973432592 ↗
21. M. Cabibbo, W. Blum, E. Evangelista, M. Kassner, and M. Meyers: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 181–89.10.1007/s11661-007-9350-z ↗
22. D.B. Williams and C.B. Carter: Transmission Electron Microscopy: A Textbook for Materials Science, Springer Science Business Media, New York, 1996.
23. P.A. Stadelmann: JEMS, EMS java version, http://cimewww.epfl.ch/people/stadelmann/jemsWebSite/jems.html.
24. M. Kumar, C. Poletti, C. Collet, and H.P. Degischer: Proceedings of the 12th International Conference on Aluminium Alloys, Japan, September 5–9, 2010, pp. 1009–14.
25. L. Zhen and S.B. Kang: Mater. Lett., 1998, vol. 37, pp. 349–53.10.1016/S0167-577X(98)00118-9 ↗
26. B. Zhang and T.N. Baker: J Mater. Proc. Tech., 2004, vols. 881–885, pp 153–54.
27. H. Asgharzadeh, A. Simchi, and H.S. Kim: Mater. Sci. Eng. A, 2012, vol. 542, pp. 56–63.10.1016/j.msea.2012.02.031 ↗
28. H. Mehrer, N. Stolica, and N.A. Stolwijk: 2.2.13 Aluminum Group Metals, Mehrer, H., ed., Springer Materials: The Landolt-Börnstein Database.
29. S. Spigarelli, M. El Mehtedi, D. Ciccarelli, and M. Regev: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6919–26.10.1016/j.msea.2011.05.032 ↗
30. S. Spigarelli, E. Evangelista, and H.J. McQueen: Scripta Mater., 2003, vol. 49, pp. 179–83.10.1016/S1359-6462(03)00206-9 ↗
31. Y. Li and T.G. Langdon: Acta Mater., 1997, vol 45, p. 4797.10.1016/S1359-6454(97)00132-8 ↗
32. S. Spigarelli, E. Evangelista, E. Cerri, and T.G. Langdon: Mater. Sci. Eng., A, 2001, vols. 319–332, pp. 721–25.10.1016/S0921-5093(01)01071-1 ↗
33. E.A. El-Danaf, A.A. AlMajid, and M.S. Soliman: J. Mater. Sci., 2008, vol. 43, pp. 6324–30.10.1007/s10853-008-2895-4 ↗
34. F. Carrefio, O.A. Ruano: Mater. Sci. Eng. A, 1996, vol. 214, pp. 177–80.10.1016/0921-5093(96)10406-8 ↗
35. M.T. Abdu, M.S. Soliman, E.A. El-Danaf, A.A. Almajid, and F.A. Mohamed: Mater. Sci. Eng. A, 2012, vol. 531, pp. 35–44.10.1016/j.msea.2011.09.115 ↗
36. T.J. Ginter and F.A. Mohamed: J. Mater. Sci., 1982, vol. 17, pp. 2007–12.10.1007/BF00540418 ↗
37. Y. Li, S.R. Nutt, and F.A. Mohamed: Acta Mater., 1997, vol. 45, pp. 2607–20.10.1016/S1359-6454(96)00367-9 ↗
38. J. H. Gittus: Proc. R. Soc. Lond. A, 1975, vol. 342, pp. 279–87.10.1098/rspa.1975.0025 ↗
39. G. Requena, B. Bauer, H. P. Degischer, and M. Lieblich: Int. J. Mater. Res., 2011, vol. 102, pp. 982–92.10.3139/146.110553 ↗
40. S.P. Deshmukh, R.S. Mishra, I.M. Robertson: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2390–97.10.1016/j.msea.2009.12.015 ↗
41. J. Rösler and E. Arzt: Acta Metall. Mater., 1990, vol. 38, pp. 671–8310.1016/0956-7151(90)90223-4 ↗
42. W.B. Pearson: A Handbook of Lattice Spacings and Structures of Metals and Alloys, G.V. Raynor, ed., Pergamon press, New York, 1958.10.1063/1.3062734 ↗
43. B. Sonderegger, I. Holzer, E. Kozeschnik and C. Sommitsch: Comput. Meth. Mater. Sci., 2011, vol. 11, pp. 148–53