journal article·2011-09

Prediction of Continuous Cooling Transformation Diagrams for Dual-Phase Steels from the Intercritical Region

V. Colla, M. DeSanctis, A. Dimatteo, G. Lovicu, R. Valentini

Publisher page

Abstract

The purpose of the present work is the implementation and validation of a model able to predict the microstructure changes and the mechanical properties in the modern high-strength dual-phase steels after the continuous annealing process line (CAPL) and galvanizing (Galv) process. Experimental continuous cooling transformation (CCT) diagrams for 13 differently alloying dual-phase steels were measured by dilatometry from the intercritical range and were used to tune the parameters of the microstructural prediction module of the model. Mechanical properties and microstructural features were measured for more than 400 dual-phase steels simulating the CAPL and Galv industrial process, and the results were used to construct the mechanical model that predicts mechanical properties from microstructural features, chemistry, and process parameters. The model was validated and proved its efficiency in reproducing the transformation kinetic and mechanical properties of dual-phase steels produced by typical industrial process. Although it is limited to the dual-phase grades and chemical compositions explored, this model will constitute a useful tool for the steel industry.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. M. Jeanneau and P. Pichant: Rev. Métall., 2000, pp. 1399–1408.10.1051/metal:2000118 ↗
2. D.T. Llewllyin and D.J. Hillis: Ironmaking and Steelmaking, 1996, vol. 23 (6), pp. 471–78.
3. H. Ding, Z.Y. Tang, W. Li, M. Wang, and D. Song: J. Iron Steel Res. Int., 2006, vol. 13 (6), pp. 66–70.10.1016/S1006-706X(06)60113-1 ↗
4. A. Bag, K.K. Ray, and E.S. Dwarakadasa: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 1193–1202.10.1007/s11661-999-0269-4 ↗
5. A. Murugaiyan, A. Saha Podder, A. Pandit, S. Chandra, and D. Bhattacharjee: ISIJ Int., 2006, vol. 46 (10), pp. 1489–94.10.2355/isijinternational.46.1489 ↗
6. M. Avrami: J. Chem. Phys., 1940, vol. 8, pp. 212–24.10.1063/1.1750631 ↗
7. J. Johnson and R. Mehl: Trans. AIME, 1939, vol. 135, pp. 416–58.
8. D.P. Koistinen and R.E. Marburger: Acta Metall. Mater., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
9. M.T. Todinov: Metall. Mater. Trans. B, 1998, vol. 29B, pp. 269–73.10.1007/s11663-998-0030-1 ↗
10. Y.T. Zhang, D.Z. Li, and Y.Y. Li: J. Mater. Process. Technol., 2006, vol. 171, pp. 175–79.10.1016/j.jmatprotec.2005.07.003 ↗
11. T.T. Pham, E.B. Hawbolt, and J.K. Brimacombe: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1993–2000.10.1007/BF02670671 ↗
12. A. Smoljan, S. Smokvina Hanza, N. Tomasic, and D. Iljkic: J. Achiev. Mater. Manuf. Eng., 2007, vol. 24, pp. 275–82.
13. W.G. Vermulen, S. Van Der Zwaag, P. Morris, and T. Weijer: Steel Res., 1997, vol. 68, pp. 72–79.10.1002/srin.199700545 ↗
14. J. Wang, P.J. Van Der Wolk, and S. Van Der Zwaag: ISIJ Int., 1999, vol. 39, pp. 1038–46.10.2355/isijinternational.39.1038 ↗
15. J. Trzaska, A. Jagiello, and L.A. Drobrzanski: Arch. Mater. Sci. Eng., 2009, vol. 39, pp. 13–20.
16. M. Reger, B. Vero, Z. Csepely, and J. Pan: 14th IFHTSE Congr. Proc., Shanghai, China, Oct. 2004, pp. 710–15.
17. V. Colla, M. DeSanctis, A. Dimatteo, G. Lovicu, A. Solina, and R. Valentini: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2557–67.10.1007/s11661-009-9975-1 ↗
18. M.T. Lusk: 4th Annual NCMS Fall Workshop Series & Networking Forum Proc., Dearborn, MI, 2000.
19. S.-J. Kim, Y.-G. Cho, C.-S. Oh, D.E. Kim, M.B. Moon, and H.N. Han: Mater. Design, 2009, vol. 30, pp. 1251–57.10.1016/j.matdes.2008.06.017 ↗
20. T. Réti, M. Gergely, and P. Tardy: Mater. Sci. Technol., 1987, vol. 3, pp. 365–71.10.1179/mst.1987.3.5.365 ↗
21. J.C. Zhao and M.R. Notis: Mater. Sci. Eng. R, 1995, vol. R15, pp. 135–208.10.1016/0927-796X(95)00183-2 ↗
22. Y. van Leeuwen, S. de Vooijs, J. Sietsma, and S. van der Zwaag: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 2925–31.10.1007/s11661-998-0199-6 ↗
23. J.L. Lee and H.K.D.H Bhadeshia: Mater. Sci. Eng. A, 1993, vol. 171, pp. 223–30.10.1016/0921-5093(93)90409-8 ↗
24. B. Donnay, J.C. Herman, V. Leroy, U. Lotter, R. Grossterlinden, and H. Pircher: 2nd Int. Conf. on Modelling of Metal Rolling Processes Proc., London, Dec. 1996, pp. 23–33.
25. Y.T. Zhang, D.Z. Li, and Y.Y. Li: J. Mater. Process. Technol., 2006, vol. 171, pp. 175–79.10.1016/j.jmatprotec.2005.07.003 ↗
26. H.K.D.H. Bhadeshia: J. Phys. IV France 7, 1997, vol. C5, pp. 367–76.
27. S.M.C. van Bohemen and J. Sietsma: Mater. Sci. Technol., 2009, vol. 25 (8), pp. 1009–12.10.1179/174328408X365838 ↗
28. B. Verdi and A. Visintin: Acta Metall., 1987, vol. 35, pp. 2711–17.10.1016/0001-6160(87)90270-7 ↗
29. I.A. Wierszyllowski: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 993–99.10.1007/BF02661092 ↗
30. Mark Lusk and Herng-Jeng Jou: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 287–91.10.1007/s11661-997-0131-5 ↗
31. P.C. Campell, E.B. Hawbolt, and J.K. Brimacombe: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 2791–2805.10.1007/BF02851373 ↗
32. E.B. Hawbolt, B. Chau, and J.K. Brimacombe: Metall. Mater. Trans. A, 1983, vol. 14A, pp. 1803–15.10.1007/BF02645550 ↗
33. J.S. Ye, H.B. Chang, and T.Y. Hsu: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1259–64.10.1007/s11661-003-0236-4 ↗
34. M.B. Kuban, R. Jayaraman, E.B. Hawbolt, and J.K. Brimacombe: Metall. Mater. Trans. A, 1986, vol. 17A, pp. 1493–1503.10.1007/BF02650085 ↗
35. K. Levenberg: Q. Appl. Math., 1944, vol. 2 (2), pp. 164–68.10.1090/qam/10666 ↗
36. D. Marquardt: SIAM J. Appl. Math., 1963, vol. 11, pp. 431–41.10.1137/0111030 ↗
37. J.J. More: in Numerical Analysis, G.A. Watson, ed., Lecture Notes in Mathematics 630, Springer Verlag, New York, NY, 1977, pp. 105–16.
38. N.R. Draper and H. Smith: Applied Regression Analysis, Wiley and Sons, New York, NY, 1998.10.1002/9781118625590 ↗