journal article·2014-07

Formation of Fine Clusters in High-Temperature Oxidation of Molten Aluminum

KeeHyun Kim

Publisher page

Abstract

High-temperature oxidation of molten aluminum was investigated by high-resolution electron microscopes in order to determine the possibility of heterogeneous nucleation of aluminum grains on oxide for the grain refinement and structural uniformity of intensively melt-sheared aluminum alloys. High-resolution observations detect initial amorphous phase and gamma-alumina phase and show fine clusters with size of about 150 to 200 nm composed of extremely fine aluminum grains and gamma-alumina or amorphous aluminum oxide. Furthermore, high-resolution lattice images and diffraction patterns show no orientation relationship, although there is a specific orientation between gamma-alumina and aluminum along (111)[110] with high potency of heterogeneous nucleation. The volumetric shrinkage by the transformation of gamma- into alpha-alumina causes the surface oxide films to repeatedly rupture and leads to the creation of channels to the base melt surface for further oxidation of fresh metal. Based on the observations, the mechanism of high-temperature oxidation of molten aluminum and formation of the fine clusters as well as the possibility of the heterogeneous nucleation of aluminum grains are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Advanced ceramic materials synthesis · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (85)

Show source-provided references
1. M. Merkwitz and W. Hoyer: Z. Metallkd., 1999, vol. 90, pp. 363–70.
2. J.A. Taylor: in High Temperature Processing Symposium 2011, M. Akbar Rhamdhani and G. Brooks, eds., Swinburne University of Technology, Melbourne, 2011, pp. 34–36.
3. B. Fateh, G.A. Brooks, M.A. Rhamdhani, J.A. Taylor, J. Davis, and M. Lowe: Light Metals 2011, John Wiley & Sons, Inc., New York, NY, 2011, pp. 725–30.10.1002/9781118061992.ch126 ↗
4. T. Campbell, R.K. Kalia, A. Nakano, P. Vashishta, S. Ogata, and S. Rodgers: Phys. Rev. Lett., 1999, vol. 82, pp. 4866–69.10.1103/PhysRevLett.82.4866 ↗
5. G.A. Chadwick: Mater. Sci. Eng. A, 1991, vol. 135, pp. 23–28.10.1016/0921-5093(91)90530-Z ↗
6. N. Birks, G.H. Meier, and F.S. Petit: Introduction to the High Temperature Oxidation of Metal, Cambridge University Press, Cambridge, United Kingdom, 2009.
7. K. Shimizu, R.C. Furneaux, G.E. Thompson, G.C. Wood, A. Gotoh, and K. Kobayashi: Oxid. Met., 1991, vol. 35, pp. 427–39.10.1007/BF00664713 ↗
8. T. Sata: J. Mater. Sci., 1994, vol. 29, pp. 129–35.10.1007/BF00356583 ↗
9. A. Robertson and A.J. Rostron: Corr. Sci., 1965, vol. 5, pp. 425–47.10.1016/0010-938X(65)90002-8 ↗
10. L.A. Narayanan, F.H. Samuel, and J.E. Gruzleski: Metall. Mater. Trans. A, 1994, vol. 25A, pp. 1761–73.10.1007/BF02668540 ↗
11. I. Levin and D. Brandon: J. Am. Ceram. Soc., 1998, vol. 81, pp. 1995–2012.10.1111/j.1151-2916.1998.tb02581.x ↗
12. S.A. Impey, D.J. Stephenson, and J.R. Nicholls: Mater. Sci. Technol., 1988, vol. 4, pp. 1126–32.10.1179/mst.1988.4.12.1126 ↗
13. I.J. Bae, O.C. Standard, G.J. Roger, and D. Brazil: J. Mater. Sci. Mater. Med., 2004, vol. 15, pp. 959–66.10.1023/B:JMSM.0000042681.25746.74 ↗
14. P. Eklund, M. Sridharan, G. Singh, and J. Bøttiger: Plasma Processes Polymers, 2009, vol. 6, pp. S907–S911.10.1002/ppap.200932301 ↗
15. M.A. Trunov, M. Schoenitz, and E.L. Dreizin: Ignition of Aluminum Powders Under Different Experimental Conditions, Propellants, Explosives, Pyrotechnics, 2005, vol. 30, pp. 36–43.10.1002/prep.200400083 ↗
16. M.A. Trunov, M. Schoenitz, X. Zhu, and E.L. Dreizin: Combust. Flame, 2005, vol. 140, pp. 310–18.10.1016/j.combustflame.2004.10.010 ↗
17. Y. Wang, H.T. Li, and Z.Y. Fan: Trans. Ind. Inst. Met., 2012, vol. 65, pp. 653–61.10.1007/s12666-012-0194-x ↗
18. P.E. Blackburn and E.A. Gulbransen: J. Electrochem. Soc., 1960, vol. 107, pp. 944–50.10.1149/1.2427576 ↗
19. M. Drouzy and C. Mascré: Int. Mater. Rev., 1969, vol. 14, pp. 25–46.10.1179/095066069790138083 ↗
20. S. Ji, W. Yang, F. Gao, D. Watson, and Z. Fan: Mater. Sci. Eng. A, 2013, vol. 564, pp. 130–39.10.1016/j.msea.2012.11.095 ↗
21. L.F. Mondolfo: Aluminium Alloys: Structure and Properties, Butterworth and Co., London, 1976.
22. K. Kim, V.D. Benny, V.T. Gustaaf, and J. Yoon: Adv. Mater. Res., 2007, vols. 15–17, pp. 159–63.10.4028/www.scientific.net/AMR.15-17.159 ↗
23. J.A. Taylor: 35th Australian Foundry Institute National Conf., J.E.A. Couzner, ed., Australian Foundry Institute (AFI), Adelaide, South Australia, 2004, pp. 148–57.
24. C.M. Allen, K.A.Q. O’Reilly, B. Cantor, and P.V. Evans: Progr. Mater. Sci., 1998, vol. 43, pp. 89–170.10.1016/S0079-6425(98)00003-6 ↗
25. G. Gustafsson, T. Thorvaldsson, and G.L. Dunlop: Metall. Trans. A, 1986, vol. 17A, pp. 45–52.10.1007/BF02644441 ↗
26. R. Raiszadeh and W.D. Griffiths: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 865–71.10.1007/BF02735007 ↗
27. R. Prescott and M.J. Graham: Oxid. Met., 1992, vol. 38, pp. 233–54.10.1007/BF00666913 ↗
28. Z. Fan, Y. Wang, M. Xia, and S. Arumuganathar: Acta Mater., 2009, vol. 57, pp. 4891–4901.10.1016/j.actamat.2009.06.052 ↗
29. R. Haghayeghi, E.J. Zoqui, and H. Bahai: J. Alloys Compd., 2009, vol. 481, pp. 358–64.10.1016/j.jallcom.2009.02.135 ↗
30. H. Men, B. Jiang, and Z. Fan: Acta Mater., 2010, vol. 58, pp. 6526–34.10.1016/j.actamat.2010.08.016 ↗
31. Y. Zuo, H. Li, M. Xia, B. Jiang, G.M. Scamans, and Z. Fan: Scripta Mater., 2011, vol. 64, pp. 209–12.10.1016/j.scriptamat.2010.09.046 ↗
32. H. Over and A.P. Seitsonen: Science, 2002, vol. 297, pp. 2003–05.10.1126/science.1077063 ↗
33. W. Thiele: Aluminum, 1962, vol. 38, pp. 707–15.
34. C.N. Cochran and W.C. Sleppy: J. Electrochem. Soc., 1961, vol. 108, pp. 322–27.10.1149/1.2428080 ↗
35. G. Wightman and D.J. Fray: Metall. Trans. B, 1983, vol. 14B, pp. 625–31.10.1007/BF02653948 ↗
36. A.U. Seybolt: Adv. Phys., 1963, vol. 12, pp. 1–43.10.1080/00018736300101253 ↗
37. A.T. Fromhold and E.L. Cook: Phys. Rev., 1967, vol. 163, pp. 650–64.10.1103/PhysRev.163.650 ↗
38. A.F. Beck, M.A. Heine, E.J. Caule, and M.J. Pryor: Corr. Sci., 1967, vol. 7, pp. 1–22.10.1016/S0010-938X(67)80066-0 ↗
39. E.A. Gulbransen and W.S. Wysong: J. Phys. Coll. Chem., 1947, vol. 51, pp. 1087–1103.10.1021/j150455a004 ↗
40. X. Cao and J. Campbell: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1409–20.10.1007/s11661-003-0253-3 ↗
41. B.E. Hayden, W. Wyrobisch, W. Oppermann, S. Hachicha, P. Hofmann, and A.M. Bradshaw: Surf. Sci., 1981, vol. 109, pp. 207–20.10.1016/0039-6028(81)90520-3 ↗
42. F. Reichel, L.P.H. Jeurgens, and E.J. Mittemeijer: Acta Mater., 2008, vol. 56, pp. 2897–2907.10.1016/j.actamat.2008.02.031 ↗
43. L.L. Lauderback and S.A. Larson: Surf. Sci., 1990, vol. 233, pp. 276–82.10.1016/0039-6028(90)90640-T ↗
44. A. Hoffman, T. Maniv, and M. Folman: Surf. Sci., 1987, vol. 182, pp. 56–68.10.1016/0039-6028(87)90088-4 ↗
45. L.P.H. Jeurgens, W.G. Sloof, F.D. Tichelaar, and E.J. Mittemeijer: J. Appl. Phys., 2002, vol. 92, pp. 1649–56.10.1063/1.1491591 ↗
46. O. Benka and M. Steinbatz: Surf. Sci., 2003, vol. 525, pp. 207–14.10.1016/S0039-6028(02)02561-X ↗
47. L.L. Lauderback, A.J. Lynn, C.J. Waltman, and S.A. Larson: Surf. Sci., 1991, vol. 243, pp. 323–33.10.1016/0039-6028(91)90370-8 ↗
48. J. Trost, H. Brune, J. Wintterlin, R.J. Behm, and G. Ertl: J. Chem. Phys., 1998, vol. 108, pp. 1740–47.10.1063/1.475546 ↗
49. H. Brune, J. Wintterlin, R.J. Behm, and G. Ertl: Phys. Rev. Lett., 1992, vol. 68, pp. 624–26.10.1103/PhysRevLett.68.624 ↗
50. H. Brune, J. Wintterlin, J. Trost, G. Ertl, J. Wiechers, and R.J. Behm: J. Chem. Phys., 1993, vol. 99, pp. 2128–48.10.1063/1.465278 ↗
51. V. Zhukov, I. Popova, and J.T. Yates, Jr.: Surf. Sci., 1999, vol. 441, pp. 251–64.10.1016/S0039-6028(99)00614-7 ↗
52. J.L. Erskine and R.L. Strong: Phys. Rev. B, 1982, vol. 25, pp. 5547–50.10.1103/PhysRevB.25.5547 ↗
53. D.J. O’Connor, E.R. Wouters, A.W.D. van der Gon, J. Vrijmoeth, P.M. Zagwijn, W.F.J. Slijkerman, J.W.M. Frenken, and J.F. van der Veen: Surf. Sci., 1993, vols. 287–288, pp. 438–42.10.1016/0039-6028(93)90819-6 ↗
54. F. Reichel, L.P.H. Jeurgens, G. Richter, P.A. van Aken, and E.J. Mittemeijer: Acta Mater., 2007, vol. 55, pp. 6027–37.10.1016/j.actamat.2007.07.011 ↗
55. E. Bergsmark, C.J. Simensen, and P. Kofstad: Mater. Sci. Eng. A, 1989, vols. 120–121, pp. 91–95.10.1016/0921-5093(89)90723-5 ↗
56. F. Stucki, M. Erbudak, and G. Kostorz: Appl. Surf. Sci., 1987, vol. 27, pp. 393–400.10.1016/0169-4332(87)90149-8 ↗
57. E.M. Hinton, W.D. Griffiths, and N.R. Green: Mater. Sci. Forum, 2013, vol. 765, pp. 180–84.10.4028/www.scientific.net/MSF.765.180 ↗
58. H.T. Li, Y. Wang, and Z. Fan: Acta Mater., 2012, vol. 60, pp. 1528–37.10.1016/j.actamat.2011.11.044 ↗
59. P.G. Enright, I.R. Hughes, J. Pickering, A. Simard, and J. Proulx: Trans. Am. Foundrym. Soc., 2003, vol. 111, pp. 193–203.
60. Prefil-Footprinter, ABB Bomem Inc., Québec, 2013.
61. K. Kim, M. Watanabe, K. Mitsuishi, K. Iakoubovskii, and S. Kuroda: J. Phys. D: Appl. Phys., 2009, vol. 42, p. 065304.10.1088/0022-3727/42/6/065304 ↗
62. K. Kim, M. Watanabe, S. Kuroda, and N. Kawano: Mater. Trans., 2011, vol. 52, pp. 439–46.10.2320/matertrans.T-M2010826 ↗
63. V. Laurent, C. Rado, and N. Eustathopoulos: Mater. Sci. Eng. A, 1996, vol. 205, pp. 1–8.10.1016/0921-5093(95)09896-8 ↗
64. H. Hindam and D.P. Whittle: Oxid. Met., 1982, vol. 18, pp. 245–84.10.1007/BF00656571 ↗
65. D.A. Porter, K.E. Eastering, and M.Y. Sherif: Phase Transformations in Metals and Alloys, 3rd ed., CRC Press, Boca Raton, FL, 2009.
66. K. Kim, N.R. Green, and W.D. Griffiths: Mater. Sci. Forum, 2013, vol. 765, pp. 150–54.10.4028/www.scientific.net/MSF.765.150 ↗
67. Y. Wang, M. Xia, Z. Fan, X. Zhou, and G.E. Thompson: Intermetallics, 2010, vol. 18, pp. 1683–89.10.1016/j.intermet.2010.05.004 ↗
68. G.A. Storaska and J.M. Howe: Mater. Sci. Eng. A, 2004, vol. 368, pp. 183–90.10.1016/j.msea.2003.10.315 ↗
69. M. Schütze: Corr. Sci., 1993, vol. 35, pp. 955–63.10.1016/0010-938X(93)90314-7 ↗
70. P.L. Schaffer, D.N. Miller, and A.K. Dahle: Scripta Mater., 2007, vol. 57, pp. 1129–32.10.1016/j.scriptamat.2007.08.009 ↗
71. P. Hou, A. Paulikas, and B. Veal: JOM, 2009, vol. 61, pp. 51–55.10.1007/s11837-009-0103-x ↗
72. Aluminum Oxide, MatWeb, 2013, www.matweb.com, Accessed 28 Sept 2013.
73. A. Sverdmin: in Handbook of Aluminum: vol. 1: Physical Metallurgy and Processes, G.E. Totten and D.S. Mackenzie, eds., CRC Press, New York, NY, 2003.
74. J. Cisse, G. Bolling, and H. Kerr: Metall. Trans. B, 1975, vol. 6B, pp. 195–97.10.1007/BF02825695 ↗
75. J. Aguilar-Santillan: J. Nanomater., 2008, p. 629185.10.1155/2008/629185 ↗
76. V. Laurent, D. Chatain, C. Chatillon, and N. Eustathopoulos: Acta Metall., 1988, vol. 36, pp. 1797–1803.10.1016/0001-6160(88)90248-9 ↗
77. J.-G. Li: Ceram. Int., 1994, vol. 20, pp. 391–412.10.1016/0272-8842(94)90027-2 ↗
78. G. Levi and W.D. Kaplan: Acta Mater., 2003, vol. 51, pp. 2793–2802.10.1016/S1359-6454(03)00084-3 ↗
79. D. Brandon and W.D. Kaplan: Microstructural Characterization of Materials, John Wiley & Sons, Ltd., New York, 2008, pp. i–xiv.10.1002/9780470727133 ↗
80. B. Bramfitt: Metall. Trans., 1970, vol. 1, pp. 1987–95.10.1007/BF02642799 ↗
81. Y.M. Kim, C.D. Yim, and B.S. You: Scripta Mater., 2007, vol. 57, pp. 691–94.10.1016/j.scriptamat.2007.06.044 ↗
82. R. Schweinfest, S. Köstlmeier, F. Ernst, C. Elsäser, T. Wagner, and M.W. Finnis: Phil. Mag. A, 2001, vol. 81, pp. 927–55.10.1080/01418610151133375 ↗
83. S.H. Oh, Y. Kauffmann, C. Scheu, W.D. Kaplan, and M. Rühle: Science, 2005, vol. 310, pp. 661–63.10.1126/science.1118611 ↗
84. K. Kim and S. Kuroda: Scripta Mater., 2010, vol. 63, pp. 215–18.10.1016/j.scriptamat.2010.03.061 ↗
85. S.C. Tjong and H. Chen: Mater. Sci. Eng. R: Rep., 2004, vol. 45, pp. 1–88.10.1016/j.mser.2004.07.001 ↗