journal article·2019-09-15

Effect of Solid Solution Elements on Solubility Products of Carbides and Nitrides in Austenite: Thermodynamic Calculations

Xuan-Wei Lei, Da-Yong Li, Xue-Hui Zhang, Tong-Xiang Liang

Publisher page

Abstract

To provide guidance on composition design of steel through control of the fraction of carbide or nitride precipitates in austenization, the effects of solid solution elements on solubility products of titanium, niobium, and vanadium carbides and nitrides in austenite were investigated by thermodynamic calculations using the two sublattice model. Solubility products of the carbides and nitrides in pure austenite were calculated, and the results were highly consistent with findings of previous studies. Solubility products of the carbides and nitrides in austenite containing different solid solution elements were evaluated and, in general, were also consistent with the reports of previous studies. Solubility products of titanium, niobium, and vanadium carbides and nitrides in austenite containing solid solution elements, on the condition that the total alloy content is relatively small, are given as follows: $$ loggamma K_{ ext{TiC}} = 3.77 - frac{8339}{T} + left( { -, 0.002 + frac{14.2}{T}} ight)left[ { ext{wt pct Mn}} ight] + left( { -, 0.009 + frac{84.6}{T}} ight)left[ { ext{wt pct Ni}} ight] + left( {0.019 + frac{12.3}{T}} ight)left[ { ext{wt pct Cr}} ight] + left( { -, 0.017 + frac{52.1}{T}} ight)left[ { ext{wt pct Mo}} ight] $$ $$ loggamma K_{ ext{NbC}} = 3.72 - frac{8534}{T} + left( {0.004 + frac{3.0}{T}} ight)left[ { ext{wt pct Mn}} ight] + left( {0.013 + frac{35.1}{T}} ight)left[ { ext{wt pct Ni}} ight] + left( {0.010 + frac{41.2}{T}} ight)left[ { ext{wt pct Cr}} ight] + left( { -, 0.013 + frac{40.4}{T}} ight)left[ { ext{wt pct Mo}} ight] $$ $$ loggamma K_{ ext{VC}} = 4.70 - frac{7041}{T} + left( { -,0.004 + frac{18.6}{T}} ight)left[ { ext{wt pct Mn}} ight] + left( { - ,0.004 + frac{37.0}{T}} ight)left[ { ext{wt pct Ni}} ight] + left( {0.003 + frac{52.8}{T}} ight)left[ { ext{wt pct Cr}} ight] + left( { - ,0.036 + frac{63.4}{T}} ight)left[ { ext{wt pct Mo}} ight] $$ $$ loggamma K_{ ext{TiN}} = 4.37 - frac{15029}{T} + left( {0.009 + frac{36.5}{T}} ight)left[ { ext{wt pct Mn}} ight] + left( { -, 0.014 + frac{73.4}{T}} ight)left[ { ext{wt pct Ni}} ight] + left( {0.004 + frac{122.9}{T}} ight)left[ { ext{wt pct Cr}} ight] + left( { -, 0.002 + frac{37.3}{T}} ight)left[ { ext{wt pct Mo}} ight] $$ $$ loggamma K_{ ext{NbN}} = 3.94 - frac{10036}{T} + left( {0.015 + frac{25.2}{T}} ight)left[ { ext{wt pct Mn}} ight] + left( {0.008 + frac{23.9}{T}} ight)left[ { ext{wt pct Ni}} ight] + left( { - ,0.004 + frac{151.8}{T}} ight)left[ { ext{wt pct Cr}} ight] + frac{34.1}{T}left[ { ext{wt pct Mo}} ight] $$ $$ loggamma K_{ ext{VN}} = 3.33 - frac{8278}{T} + left( {0.007 + frac{40.6}{T}} ight)left[ { ext{wt pct Mn}} ight] + left( { - ,0.009 + frac{26.0}{T}} ight)left[ { ext{wt pct Ni}} ight] + left( { - ,0.012 + frac{163.5}{T}} ight)left[ { ext{wt pct Cr}} ight] + left( { - ,0.023 + frac{57.1}{T}} ight)left[ { ext{wt pct Mo}} ight] $$
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal and Thin Film Mechanics · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. [1] M. Takano: J. Nucl. Mater., 2013, vol. 440, pp. 489-94.10.1016/j.jnucmat.2013.02.008 ↗
2. [2] H. Wada: ISIJ Int., 1987, vol. 27, pp. 649-57.10.2355/isijinternational1966.27.649 ↗
3. [3] E.J. Pavlina, J.G. Speer, and C.J. Van Tyne: Scripta Mater., 2012, vol. 66, pp. 243-46.10.1016/j.scriptamat.2011.10.047 ↗
4. [4] V.V. Popov and I.I. Gorbachev: Fizika Metallov i Metallovedenie, 2004, vol. 98, pp. 11-21.
5. [5] V.V. Popov and I.I. Gorbachev: Fizika Metallov i Metallovedenie, 2005, vol. 99, pp. 69-82.
6. [6] I.I. Gorbachev and V.V. Popov: Phys. Met. Metallogr., 2010, vol. 110, pp. 52-61.10.1134/S0031918X10070070 ↗
7. [7] I.I. Gorbachev and V.V. Popov: Phys. Met. Metallogr., 2009, vol. 108, pp. 484-95.10.1134/S0031918X09110088 ↗
8. [8] I.I. Gorbachev, V.V. Popov and A.Y. Pasynkov: Phys. Met. Metallogr., 2016, vol. 117, pp.1226-36.10.1134/S0031918X16120061 ↗
9. [9] K. Inoue, N. Ishikawa, I. Ohnuma, H. Ohtani and K. Ishida: ISIJ Int., 2001, vol. 41, pp. 175-82.10.2355/isijinternational.41.175 ↗
10. [10] U.D. Veryatin, V.P. Mashirev, N.G. Ryabtsev, V.I. Tarasov, B.D. Rogozkin and I.V. Korobov: Thermodynamic Properties of Inorganic Substances, Atomizdat, Moscow, 1965.
11. M. Binnewies and E. Milke: Thermochemical Data of Elements and Compounds. Wiley-VCH, New York 1999.
12. [12] A. Dinsdale: Calphad, 1991, 15(4), 317-25.10.1016/0364-5916(91)90030-N ↗
13. [13] C. Qiu: Metal. Trans. A, 1993, vol. 24, pp. 629-45.10.1007/BF02656632 ↗
14. [14] S. Hertzman and M. Jarl: Metal. Mat. Trans. A, 1987, vol. 18, pp.1745-52.10.1007/BF02646206 ↗
15. [15] W. Huang: Metal. Trans. A, 1991, vol. 22, pp. 1911-20.10.1007/BF02669859 ↗
16. [16] M. Hillert and C. Qiu: Metal. Trans. A, 1991, vol. 22, pp. 2187-98.10.1007/BF02664985 ↗
17. [17] M. Hillert and C. Qiu: J Phase Equilib., 1992, vol. 13, pp. 512-21.10.1007/BF02665764 ↗
18. [18] S. Hertzman: Metal. Trans. A, 1987, vol. 18, pp. 1767-78.10.1007/BF02646208 ↗
19. [19] S. Atamert and J.E. King: Acta Metallurgica et Materialia, 1991, vol. 39, pp. 273-85.10.1016/0956-7151(91)90306-L ↗
20. [20] K. Frisk: Calphad, 1991, vol. 15, pp. 79-06.10.1016/0364-5916(91)90028-I ↗
21. [21] K. Balasubramanian, A. Kroupa and J.S. Kirkaldy: Metal. Trans. A, 1992, vol. 23, pp. 729-44.10.1007/BF02675551 ↗
22. A. Kroupa, J. Havránková, M. Svoboda, M. Coufalová and J. Vřešt’Ál: J Phase Equilib., 2001, vol. 22, pp. 312–23.10.1361/105497101770338824 ↗
23. [23] K. Santhy and K.H. Kumar: J Alloy Compd., 2015, vol. 15, pp. 733-47.10.1016/j.jallcom.2014.08.200 ↗
24. [24] J.H. Shim, C.S. Oh, D.N. Lee: Metal. Mat. Trans. B, 1996, vol. 27, pp. 955-66.10.1007/s11663-996-0009-8 ↗
25. [25] K. J. Irvine, F. B. Pickering and T. Gladman: J Iron Steel Inst., 1967, vol. 205, pp. 161-82.
26. [26] H. Ohtani, T. Tanaka, M. Hasebe and T. Nishizawa: Calphad, 1988, vol. 12, pp. 225-46.10.1016/0364-5916(88)90003-X ↗
27. [27] K. Balasubramanian, A. Kroupa and J.S. Kirkaldy: Metal. Trans. A, 1992, vol. 23, pp. 709-27.10.1007/BF02675550 ↗
28. [28] S. Akamatsu, M. Hasebe, T. Senuma, Y. Matsumura and O. Kisue: ISIJ Int., 1994, vol. 34, pp. 9-16.10.2355/isijinternational.34.9 ↗
29. [29] S. Koyama, T. Ishii and K. Narita: Tetsu-to-Hagané, 1971, vol. 35, pp. 1089-06.
30. [30] T. Mori, M. Tokizane, K. Yamaguchi, E. Sunami and Y. Nakazima: Tetsu-to-Hagané, 1968, vol. 54, pp. 763-76.10.2355/tetsutohagane1955.54.7_763 ↗
31. [31] J.A. Todd and P. Li: Metal. Trans. A, 1986, vol. 17, pp. 1191-02.10.1007/BF02665318 ↗
32. [32] J. Kunze: Metal. Sci., 1982, vol. 1, pp. 217-18.
33. [33] H. Wada and R.D. Pehlke: Metal. Trans. B, 1985, vol. 16, pp. 815-22.10.1007/BF02667518 ↗
34. [34] J. Kunze, B. Beyer, S. Oswald and W. Gruner: Steel Res., 1995, vol. 66, pp. 161-66.10.1002/srin.199501105 ↗
35. [35] K. Inoue, I. Ohnuma, H. Ohtani, K. Ishida and T. Nishizawa: ISIJ Int., 1998, vol. 38, pp. 991-97.10.2355/isijinternational.38.991 ↗
36. [36] R.P. Smith: Trans. AIME, 1962, vol. 224, p. 190-98.
37. [37] H. Ohtani and M. Hillert: Calphad, 1991, vol. 15, pp. 25-39.10.1016/0364-5916(91)90023-D ↗
38. W. Roberts and A. Sandberg: Swedish Institute for Metals Research Report, No. IM-1489, Stockholm, 1980, pp.301-06.
39. [39] M. Tamura, K. Ikeda, H. Esaka and K. Shinozuka: ISIJ Int., 2001, vol. 41, pp. 908-14.10.2355/isijinternational.41.908 ↗
40. [40] A.V. Khvan and B. Hallstedt: Calphad, 2012, vol. 39, pp. 62-69.10.1016/j.calphad.2012.09.001 ↗
41. [41] S. Koyama, T. Ishii and K. Narita: Tetsu-to-Hagané, 1971, vol. 35, pp. 698-08.
42. [42] M. Tamura, H. Iida, H. Esaka and K. Shinozuka: ISIJ Int., 2003, vol. 43, pp. 1807-13.10.2355/isijinternational.43.1807 ↗
43. [43] C. Scott, B. Remy, J.L. Collet, A. Cael, C. Bao, F. Danoix, B. Malard and C. Curfs: Int. J Mat. Res., 2011, vol. 102, pp. 538-49.10.3139/146.110508 ↗
44. [44] A.V. Khvan, B. Hallstedt and K. Chang: Calphad, 2012, vol. 39, pp. 54-61.10.1016/j.calphad.2012.09.002 ↗