Improvement of the hardness and wear resistance of (TiC, TiN)/Ti-6Al-4V surface-alloyed materials fabricated by high-energy electron-beam irradiation
Source abstract
Abstract
This study is concerned with the microstructural analysis and improvement of the hardness and wear resistance of Ti-6Al-4V surface-alloyed materials fabricated by a high-energy electron beam. The mixtures of TiC, TiN, or TiC + TiN powders and CaF2 flux were deposited on a Ti-6Al-4V substrate, and then the electron beam was irradiated on these mixtures. In the specimens processed with a flux addition, the surface-alloyed layers of 1 mm in thickness were homogeneously formed without defects and contained a large amount (over 30 vol pct) of precipitates such as TiC, TiN, (Ti x Al1−x )N, and Ti(C x N1−x ) in the martensitic or N-rich acicular α-Ti matrix. This microstructural modification, including the formation of hard precipitates and hardened matrices in the surface-alloyed layers, improved the hardness and wear resistance. Particularly in the surface-alloyed material fabricated by the deposition of TiN powders, the wear resistance was greatly enhanced to a level 10 times higher than that of the Ti alloy substrate. These findings suggested that surface alloying using high-energy electron-beam irradiation was economical and useful for the development of titanium-based surface-alloyed materials with improved hardness and wear resistance.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Metal Alloys Wear and Properties · Fusion materials and technologies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (31)
Show source-provided references
1. R. Boyer, G. Welsch, and E.W. Collings: Material Properties Handbook: Titanium Alloys, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 347–60.
2. M. Yamada: Mater. Sci. Eng., 1996, vol. A213, pp. 8–15.10.1016/0921-5093(96)10241-0 ↗
3. A. Molinari, G. Straffelini, B. Tesi, and T. Bacci: Wear, 1997, vol. 208, pp. 105–12.10.1016/S0043-1648(96)07454-6 ↗
4. R. Boyer, G. Welsch, and E.W. Collings: Material Properties Handbook: Titanium Alloys, ASM INTERNATIONAL, Materials Park, OH, 1994, pp. 1169–76.
5. O.V. Akgun and O.T. Inal: J. Mater. Sci., 1994, vol. 29, pp. 1159–68.10.1007/BF00975058 ↗
6. J.K. Gregory, H.J. Rack, and D. Eylon: Surface Performance of Titanium, TMS, 1996, pp. 1–22.
7. P. Jiang, X.L. He, X.X. Li, L.G. Yu, and H.M. Wang: Surf. Coating Technology, 2000, vol. 130, pp. 24–28.10.1016/S0257-8972(00)00680-0 ↗
8. S.-H. Choo, S. Lee, and S.-J. Kwon: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3131–41.10.1007/s11661-999-0224-4 ↗
9. K. Euh, S. Lee, and K. Shin: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 3143–51.10.1007/s11661-999-0225-3 ↗
10. A.B. Kloosterman, B.J. Kooi, and J.T.M. De Hosson: Acta Mater., 1998, vol. 46, pp. 6205–17.10.1016/S1359-6454(98)00265-1 ↗
11. S. Yerramareddy and S. Bahadur: Wear, 1992, vol. 157, pp. 245–62.10.1016/0043-1648(92)90065-G ↗
12. S. Fukumoto, H. Tsubakino, S. Inoue, L. Liu, M. Terasawa, and T. Mitamura: Mater. Sci. Eng., 1999, vol. A263, pp. 205–09.10.1016/S0921-5093(98)01166-6 ↗
13. T. Smith: J. Met., 1994, vol. 46, pp. 54–56.
14. C. Hu, H. Xin, L.M. Watson, and T.N. Baker: Acta Mater., 1997, vol. 45, pp. 4311–22.10.1016/S1359-6454(97)00076-1 ↗
15. C. Badini, M. Bianco, S. Talentino, X.B. Guo, and C. Gianoglio: Appl. Surf. Sci., 1992, vol. 54, pp. 374–80.10.1016/0169-4332(92)90074-8 ↗
16. Y. Fu, J. Wei, and A.W. Batchelor: J. Mater. Proc. Technol., 2000, vol. 99, pp. 231–45.10.1016/S0924-0136(99)00429-X ↗
17. J.C. Oh, D-K. Choo, and S. Lee: Surf. Coating Technol., 2000, vol. 127, pp. 76–85.10.1016/S0257-8972(99)00664-7 ↗
18. J.C. Oh, K. Euh, S. Lee, Y. Koo, and N.J. Kim: Scripta Mater., 1998, vol. 39, pp. 1389–94.10.1016/S1359-6462(98)00325-X ↗
19. A.F. Vaisman, S.B. Vasserman, M.G. Golkovskii, V.D. Kedo, and R.A. Salimov: About Surface Handening by Concentrated Electron Beam at Atmosphere, Budker Institute of Nuclear Physics, Novosibrsk, Russia, 1988, Preprint 73–88, pp. 5–31.
20. M. Bauccio: ASM Engineering Materials Reference Book, 2nd ed. ASM INTERNATIONAL, Metals Park, OH, 1994, pp. 283 and 297.
21. R.C. Weast: Handbook of Chemistry and Physics 55th, CRC Press, Cleveland, OH, 1974, p. B-77.
22. ASTM Standard Practice for Conducting Dry Sand/Rubber Wheel Abrasion Tests, ASTM G65-83, ASTM, Philadelphia. PA, 1989.
23. Y. Lin, R.H. Zee, and B.A. Chin: Metall. Mater. Trans. A, 1991, vol. 22A, pp. 859–65.10.1007/BF02658995 ↗
24. C. Hu, H. Xin, L.M. Watson, and T.N. Baker: Acta Mater., 1997, vol. 45, pp. 4311–22.10.1016/S1359-6454(97)00076-1 ↗
25. E.K. Storms: The Refractory Carbides, Academic Press, New York, 1967, pp. 1–17.
26. J.R. Roos, J.P. Celis, and E. Vancoille: Thin Solid Film, 1990, vol. 193, pp. 547–56.10.1016/S0040-6090(05)80064-1 ↗
27. T. Tabata and R. Ito: Nucl. Sci. Eng., 1974, vol. 53, pp. 226–39.10.13182/NSE74-A23346 ↗
28. S. Schiller, U. Heisig, and S. Panzer: Electron Beam Technology, John Wiley & Sons, Inc., New York, NY, 1982, pp. 38–41.
29. S.M. Gurevich: The Metallurgy and Technology of Welding the Titanium and Titanium Alloys, Kiev, 1986, pp. 108 and 118.
30. T.B Massalski: Binary Alloy Phase Diagram, ASM INTERNATIONAL, Metals Park, OH, 1986, vol. 1, p. 593.
31. H. Ha, G.-M. Hwang, and H.-C. Lee: J. Kor. Cer. Soc., 1994, vol. 31, pp. 637–42.