journal article·2020-07Open access

Different Evolutions of the Microstructure, Texture, and Mechanical Performance During Tension and Compression of 316L Stainless Steel

Moustafa El-Tahawy, Péter Jenei, Tamás Kolonits, Gigap Han, Hyeji Park, Heeman Choe, Jenő Gubicza

Abstract

Abstract The tensile and compressive behaviors of 316L stainless steel at room temperature were compared. The differences between the stress–strain responses during tension and compression were explained by the different evolutions of the texture, defect structure, and phase composition. It was found that up to true strain of ~ 25 pct the flow stress during tension was only slightly higher (by ~ 40 MPa) than that during compression, which can be explained by the different textures of the two types of specimens. On the other hand, between the strains of 25 and 50 pct, the strain hardening for tension was much higher, which resulted in a ~ 200 MPa larger flow stress in the tensile-tested specimen at 50 pct strain. It was revealed that the higher flow stress in tension was caused by the harder texture, the higher dislocation density, and the larger fraction of martensite phase.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (69)

Show source-provided references
1. Y. Kim, Y. Kim, D. Kim, S. Kim, W. Nam, and H. Choe: Mater. Trans., 2011, vol. 52, pp. 507–13.10.2320/matertrans.M2010273 ↗
2. S. Wang, J. Li, Y. Cao, B. Gao, Q. Mao, and Y. Li: Vacuum, 2018, vol. 152, pp. 261–4.10.1016/j.vacuum.2018.03.040 ↗
3. R.K. Desu, K.H. Nitin, A. Balu, A.K. Gupta, and S.K. Singh: J. Mater. Res. Technol., 2016, vol. 5, pp. 13–20.10.1016/j.jmrt.2015.04.001 ↗
4. L. Zhang and J. Wang: J. Nucl. Mater., 2014, vol. 446, pp. 15–26.10.1016/j.jnucmat.2013.11.027 ↗
5. A.U. Malik, S. Ahmad, and I. Andijani: Desalination, 1999, vol. 123, pp. 205–13.10.1016/S0011-9164(99)00078-8 ↗
6. F. V. Anghelina, D.N. Ungureanu, V. Bratu, I.N. Popescu, and C.O. Rusanescu: Appl. Surf. Sci., 2013, vol. 285, pp. 65–71.10.1016/j.apsusc.2013.06.102 ↗
7. J. Gubicza, M. El-Tahawy, Y. Huang, H. Choi, H. Choe, J.L. Lábár, and T.G. Langdon: Mater. Sci. Eng. A, 2016, vol. 657, pp. 215–23.10.1016/j.msea.2016.01.057 ↗
8. Y. Mine, Z. Horita, and Y. Murakami: Acta Mater., 2009, vol. 57, pp. 2993–3002.10.1016/j.actamat.2009.03.006 ↗
9. K. Spencer, M. Véron, K. Yu-Zhang, and J.D. Embury: Mater. Sci. Technol., 2009, vol. 25, pp. 7–17.10.1179/174328408X293603 ↗
10. H.F.G. De Abreu, S.S. De Carvalho, P. De Limaneto, R.P. Dossantos, V.N. Freire, P.M.D.O. Silva, and S.S.M. Tavares: Mater. Res., 2007, vol. 10, pp. 359–66.10.1590/S1516-14392007000400007 ↗
11. V. Shrinivas, S.K. Varma, and L.E. Murr: Metall. Mater. Trans. A, 1995, vol. 26, pp. 661–71.10.1007/BF02663916 ↗
12. M. Eskandari, A. Najafizadeh, and A. Kermanpur: Mater. Sci. Eng. A, 2009, vol. 519, pp. 46–50.10.1016/j.msea.2009.04.038 ↗
13. S. Scheriau, Z. Zhang, S. Kleber, and R. Pippan: Mater. Sci. Eng. A, 2011, vol. 528, pp. 2776–86.10.1016/j.msea.2010.12.023 ↗
14. S. Martin, S. Wolf, U. Martin, L. Krüger, and D. Rafaja: Metall. Mater. Trans. A, 2016, vol. 47, pp. 49–58.10.1007/s11661-014-2684-4 ↗
15. J.D.E. K. Spencer, M. Véron, K. Yu-Zhang: Mater. Sci. Technol., 2009, vol. 25, pp. 7–17.10.1179/174328408X293603 ↗
16. G.B. Olson and M. Cohen: J. Less-Common Met., 1972, vol. 28, pp. 107–18.10.1016/0022-5088(72)90173-7 ↗
17. A.K. De, J.G. Speer, D.K. Matlock, D.C. Murdock, M.C. Mataya, and R.J. Comstock: Metall. Mater. Trans. A 2006, vol. 37, pp. 1875–86.
18. J.A. Venables: Philos. Mag., vol. 7, pp. 35–44 (1962).10.1080/14786436208201856 ↗
19. A.J. Bogers and W.G. Burgers: Acta Metall., 1964, vol. 12, pp. 255–61.10.1016/0001-6160(64)90194-4 ↗
20. R. Lagneborgj: Acta Metall., 1964, vol. 12, pp. 823–43.10.1016/0001-6160(64)90176-2 ↗
21. C. Herrera, R.L. Plaut, and A.F. Padilha: Mater. Sci. Forum, 2007, vol. 550, pp. 423–8.10.4028/www.scientific.net/MSF.550.423 ↗
22. A.K. De, J.G. Speer, D.K. Matlock, D.C. Murdock, M.C. Mataya, and R.J. Comstock: Metall. Mater. Trans. A 2006, vol. 37, pp. 1875–86.
23. L. Krüger, S. Wolf, U. Martin, S. Martin, P.R. Scheller, A. Jahn, and A. Weiß: J. Phys. Conf. Ser., 2010, vol. 240, pp. 012098.10.1088/1742-6596/240/1/012098 ↗
24. P.M. de O. Silva, H.F.G. d. Abreu, V.H.C. d. Albuquerque, P. de L. Neto, and J.M.R.S. Tavares: Mater. Des., 2011, vol. 32, pp. 605–14.10.1016/j.matdes.2010.08.012 ↗
25. S. Curtze and V.T. Kuokkala: Acta Mater., 2010, vol. 58, pp. 5129–41.10.1016/j.actamat.2010.05.049 ↗
26. M. Calmunger, G. Chai, R. Eriksson, S. Johansson, and J.J. Moverare: Metall. Mater. Trans. A, 2017, vol. 48, pp. 4525–38.10.1007/s11661-017-4212-9 ↗
27. X. Wu, X. Pan, J.C. Mabon, M. Li, and J.F. Stubbins: J. Nucl. Mater., 2006, vol. 356, pp. 70–7.10.1016/j.jnucmat.2006.05.047 ↗
28. A. Talgotra, E. Nagy, M. Sepsi, M. Benke, and V. Mertinger: IOP Conf. Series: Materials Science and Engineering, 2018, vol. 426, article no. 01204610.1088/1757-899X/426/1/012046 ↗
29. F. De Barbieri, F.C. Cerda, J. Pérez-Ipiña, A. Artigas, and A. Monsalve: Metals, 2018, vol. 8, article no. 262.10.3390/met8040262 ↗
30. Z. Tang, J. Huang, H. Ding, Z. Cai, D. Zhang, and D. Misra: Metals, 2018, vol. 8, article no. 476.10.3390/met8070476 ↗
31. S.S. Hecher, M.G. Stout, K.P. Staudhammer, and J.L. Smith: Met. Trans. A, 1982, vol. 13, pp. 619–626.10.1007/BF02644427 ↗
32. P. Hedstrom, L.E. Lindgren, J. Almer, U. Lienert, J. Bernier, M. Terner, and M. Oden: Met. Mater. Trans. A, 2009, vol. 40, pp. 1039–1048.10.1007/s11661-009-9807-3 ↗
33. A.F. Padilha, R.L. Plaut, and P.R. Rios: ISIJ Int., 2003, vol. 43, pp. 135–43.10.2355/isijinternational.43.135 ↗
34. S. Qu, C.X. Huang, Y.L. Gao, G. Yang, S.D. Wu, Q.S. Zang, and Z.F. Zhang: Mater. Sci. Eng. A, 2008, vol. 475, pp. 207–16.10.1016/j.msea.2007.04.111 ↗
35. G.G. Yapici, I. Karaman, Z.P. Luo, H.J. Maier, and Y.I. Chumlyakov: J. Mater. Res., 2004, vol. 19, pp. 2268–78.10.1557/JMR.2004.0289 ↗
36. C.Y. Yu, P.L. Sun, P.W. Kao, and C.P. Chang: Scr. Mater., 2005, vol. 52, pp. 359–63.10.1016/j.scriptamat.2004.10.035 ↗
37. B.Q. Han, E.J. Lavernia, and F.A. Mohamed: Mater. Sci. Eng. A, 2003, vol. 358, pp. 318–23.10.1016/S0921-5093(03)00284-3 ↗
38. S. Cheng, J.A. Spencer, and W.W. Milligan: Acta Mater., 2003, vol. 51, pp. 4505–18.10.1016/S1359-6454(03)00286-6 ↗
39. H. Luo, L. Shaw, L.C. Zhang, and D. Miracle: Mater. Sci. Eng. A, 2005, vol. 409, pp. 249–56.10.1016/j.msea.2005.06.075 ↗
40. K. Gall: Int. J. Plast., 1999, vol. 15, pp. 69–92.10.1016/S0749-6419(98)00060-6 ↗
41. E. Girault, A. Mertens, P. Jacques, Y. Houbaert, B. Verlinden, and J. Van Humbeeck: Scr. Mater., 2001, vol. 44, pp. 885–92.10.1016/S1359-6462(00)00697-7 ↗
42. N. Tsuchida, Y. Morimoto, T. Tonan, Y. Shibata, K. Fukaura, and R. Ueji: ISIJ Int., 2011, vol. 51, pp. 124–9.10.2355/isijinternational.51.124 ↗
43. X.L. Wu, M.X. Yang, F.P. Yuan, L. Chen, and Y.T. Zhu: Acta Mater., 2016, vol. 112, pp. 337–46.10.1016/j.actamat.2016.04.045 ↗
44. E.R. Parker and V.F. Zackay: Eng. Fract. Mech., 1973, vol. 5, pp. 147–65.10.1016/0013-7944(73)90013-1 ↗
45. H. Kim, J. Lee, F. Barlat, D. Kim, and M.G. Lee: Acta Mater., 2015, vol. 97, pp. 435–44.10.1016/j.actamat.2015.06.023 ↗
46. J.R. Patel and M. Cohen: Acta Metall., 1953, vol. 1, pp. 531–8.10.1016/0001-6160(53)90083-2 ↗
47. I.Y. Pyshmintsev, M. De Meyer, B.C. De Cooman, R.A. Savray, V.P. Shveykin, and M. Vermeulen: Metall. Mater. Trans. A 2002, vol. 33, pp. 1659–67.10.1007/s11661-002-0175-5 ↗
48. S. V. Radcliffe and M. Schatz: Acta Metall., 1962, vol. 10, pp. 201–7.10.1016/0001-6160(62)90117-7 ↗
49. H. Kim, J. Park, Y. Ha, W. Kim, S.S. Sohn, H.S. Kim, B.J. Lee, N.J. Kim, and S. Lee: Acta Mater., 2015, vol. 96, pp. 37–46.10.1016/j.actamat.2015.06.021 ↗
50. G. Ribárik, J. Gubicza, and T. Ungár: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 343–7.10.1016/j.msea.2004.01.089 ↗
51. B. Beausir, J.-J. Fundenberger: Analysis Tools for Electron and X-ray diffraction, ATEX - software, www.atex-software.eu, Université de Lorraine - Metz, 2017
52. Y. Zhou, K.W. Neale, and L.S. Tóth: Acta Metall. Mater., 1991, vol. 39, pp. 2921-30.10.1016/0956-7151(91)90108-D ↗
53. Y. Zhou, L.S. Tóth, and K.W. Neale: Acta Metall. Mater., 1992, vol. 40, pp. 3179-3193.10.1016/0956-7151(92)90481-S ↗
54. G. Meric de Bellefon, J.C. van Duysen, and K. Sridharan: J. Nucl. Mater., 2017, vol. 492, pp. 227–30.10.1016/j.jnucmat.2017.05.037 ↗
55. J. Gubicza: Defect Structure and Properties of Nanomaterials, 2nd ed., Woodhead Publishing, Duxford, 2017, pp. 27-93.10.1016/B978-0-08-101917-7.00002-5 ↗
56. K. Bowman: Mechanical Behavior of Materials, John Wiley & Sons, Hoboken, 2003, pp. 1-368.
57. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps: The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, 1982, pp. 1-166.
58. C. Celada-Casero, H. Kooiker, M. Groen, J. Post, and D. San-Martin: Metals, 2017, vol. 7, article no. 271.10.3390/met7070271 ↗
59. J.L. dos Santos, S.N. Monteiroa, V.S. Cândido, A.O. da Silvaa, and F.J. Tommasini: Mater. Res., 2017, vol. 20, pp. 596-602.10.1590/1980-5373-mr-2017-0051 ↗
60. J. Talonen, H. Hänninen, P. Nenonen, and G. Pape: Metall. Mater. Trans. A, 2005, vol. 36, pp. 421–432.10.1007/s11661-005-0313-y ↗
61. S.S. Hecker, M.G. Stout, K.P. Staudhammer, and J.L. Smith: Metall. Trans. A, 1982, vol. 13, pp. 619–26.10.1007/BF02644427 ↗
62. K. Al-Fadhalah, M. Aleem: Metall. Mater. Trans. A, 2018, vol. 49, pp. 1121–1139.10.1007/s11661-018-4475-9 ↗
63. A.A. Lebedev and V. V Kosarchuk: Int. J. Plast., 2000, vol. 16, pp. 749–67.10.1016/S0749-6419(99)00085-6 ↗
64. Y. Peng, J. Chu, and J. Dong: Materials (Basel)., 2018, vol. 11, pp. 1023–34.10.3390/ma11061023 ↗
65. J.E. Carsley, A. Fisher, W.W. Milligan, E.C. Aifantis: Metall. Mater. Trans. A, 1998, vol. 29, pp. 2261–71.10.1007/s11661-998-0104-3 ↗
66. H.N. Han, C.G. Lee, C.-S. Oh, T.-H. Lee, S.-J. Kim: Acta Mater. 2004, vol. 52, pp. 5203–5214.10.1016/j.actamat.2004.07.031 ↗
67. V. Seetharaman and R. Krishnan: J. Mater. Sci., 1981, vol. 16, pp. 523–30.10.1007/BF00738646 ↗
68. S.K. Varma, J. Kalyanam, L.E. Murk, and V. Srinivas: J. Mater. Sci. Lett., 1994, vol. 13, pp. 107–11.10.1007/BF00416816 ↗
69. S. Karewar, J. Sietsma, and M. Santofimia: Crystals, 2019, vol. 9, pp. 99–112.10.3390/cryst9020099 ↗