Achievement of High Ductility and Ultra-high Strength of V-Nb Microalloyed Spring Steel by Austempered Multiphase Microstructure
Source abstract
Abstract
A V-Nb microalloyed spring steel was investigated through a series of austempering heat treatments. Optimal properties were obtained after austempering at 240 °C for 2 hours because of the good coordination of multiphase martensitic/bainite, filmy retained austenite and fine carbides. The tensile strength was 2239 MPa and the total elongation was 16.1 pct. With an increase in temperature, the matrix changed from martensite to bainite. The volume fraction of retained austenite decreased from 13.7 pct at 240 °C to 9.6 pct at 280 °C and then increased to a maximum of 19.2 pct at 360 °C. The tensile strength remained above 1500 MPa and the impact energy increased to 30 J. MC carbides formed in martensite lathes and ɛ- or θ-type carbides with acicular nanoscale were precipitated in bainite lathes at a low temperature. MC- and M3C-type precipitated in bainite lathes at high temperature. Samples that were subjected to a low isothermal temperature had a high strain-hardening rate before necking, whereas samples at a high isothermal temperature could exert a TRIP effect for a long time. After stretching to fracture, a hierarchical nanotwinned structure and many shear cells formed, which enhanced the austempered sample ductility and toughness at 360 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (49)
Show source-provided references
1. C. Goulas, A. Kumar, M.G. Mecozzi, F.M. Castro-Cerda, M. Herbig, R.H. Petrov, and J. Sietsmab: Mater. Charact., 2019, vol. 152, pp. 67-75.10.1016/j.matchar.2019.03.038 ↗
2. B. Podgornik, V. Leskovšek, M. Godec, and B. Senčič: Mater. Sci. Eng. A, 2014, vol. 599, pp. 81-86.10.1016/j.msea.2014.01.054 ↗
3. Y.B. Liu, W. Zhang, Q. Tong, and L.F. Wang: ISIJ Int., 2014, vol. 54, pp. 1920-26.10.2355/isijinternational.54.1920 ↗
4. C.L. Zhang, Y.Z. Liu, L.Y. Zhou, C. Jiang, and J.F. Xiao: Int. J. Min. Met. Mater., 2012, vol. 19, pp. 116-21.10.1007/s12613-012-0525-2 ↗
5. S. A. Choi, Ph.D. thesis, 2011, Delft University of Technology, Delft. http://resolver.tudelft.nl/uuid:7ab34006-2323-4779-8ea9-b08e0e43f213. Accessed 31 Jan 2011.
6. H.K.D.H. Bhadeshia: Mater. Sci. Forum., 2005, vol. 500-501, pp. 63-74.10.4028/www.scientific.net/MSF.500-501.63 ↗
7. Z.J. Xie, Y.Q. Ren, W.H. Zhou, J.R. Yang, C.J. Shang, R.D.K. Misra: Mater. Sci. Eng. A, 2014, vol. 603, pp. 69-75.10.1016/j.msea.2014.02.059 ↗
8. S.H. Kim, K.H. Kim, C.M. Bae, J.S. Lee, and D.W. Suh: Met. Mater. Int., 2018, vol. 24, pp. 693-01.10.1007/s12540-018-0085-8 ↗
9. T. Fukuzumi, S. Komazaki, and T. Misawa: J. Iron Steel Inst. Jpn., 2002, vol. 88, pp. 81-87.10.2355/tetsutohagane1955.88.2_81 ↗
10. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611-22.10.1016/S1359-6454(03)00059-4 ↗
11. Z. Wang, and M.X. Huang: Metall. Mater. Trans. A,.2019, vol. 50. pp. 5650-55.10.1007/s11661-019-05465-w ↗
12. N. Zhong, X.D. Wang, L. Wang, and Y.H. Rong: Mater. Sci. Eng. A, 2009, vol. 506, pp. 111-16.10.1016/j.msea.2008.11.014 ↗
13. Y. Li, W. Li, W.Q. Liu, X.D. Wang, X.M. Hua, H.B Liu, and X.J. Jin: Acta Mater., 2018, vol. 146, pp. 126-41.10.1016/j.actamat.2017.12.035 ↗
14. T.Y. Hsu, X.J. Jin, and Y.H. Rong: J. Alloy Compd., 2013, vol. 577S, pp. S568-71.
15. G.H. Gao, H. Zhang, X.L. Gui, P. Luo, Z.L. Tan, and B.Z. Bai: Acta Mater., 2014, vol. 76, pp. 425-33.10.1016/j.actamat.2014.05.055 ↗
16. K.K. Wang, Z.L. Tan, G.H. Gao, B. Gao, X.L. Gui, R.D.K. Misra, and B.Z. Bai: Mater. Sci. Eng. A, 2016, vol. 675, pp. 120-27.10.1016/j.msea.2016.08.026 ↗
17. D. Mandal, M. Ghosh, J. Pal, S.G. Chowdhury, G. Das, S.K. Das, and S. Ghosh: Mater. Design, 2014, vol. 54, pp. 831-37.10.1016/j.matdes.2013.09.005 ↗
18. D.V. Edmonds, K. He, F.C. Rizzo, B.C. De Cooman, D.K. Matlock, and J.G. Speer: Mater. Sci. Eng. A, 2006, vol. 438-440, pp. 25-34.10.1016/j.msea.2006.02.133 ↗
19. J.G. Speer, D.V. Edmonds, F.C. Rizzo, and D.K. Matlock: Curr. Opin. St. M., 2004, vol. 8, pp. 219-37.10.1016/j.cossms.2004.09.003 ↗
20. J. Dong, X.S. Zhou, Y.C Liu, C. Li, C.X. Liu, and H.J. Li: Mater. Sci. Eng. A, 2017, vol. 690, pp. 283-93.10.1016/j.msea.2017.03.020 ↗
21. M.G. Ou, C.L. Yang, J. Zhu, Q.F. Xia, and H.N. Qiao: J. Alloy Compd., 2017, vol. 697, pp. 43-54.10.1016/j.jallcom.2016.12.134 ↗
22. H.P. Liu, X.W. Lu, X.J. Jin, H. Dong, and J. Shi: Scripta Mater., 2011, vol. 64, pp. 749-52.10.1016/j.scriptamat.2010.12.037 ↗
23. B. Avishan, M. Tavakolian, and S. Yazdani: Mater. Sci. Eng. A, 2017, vol. 693, pp. 178-85.10.1016/j.msea.2017.03.104 ↗
24. J.B. Seol, D. Raabe, P.P. Choi, Y.R. Im, and C.G. Park: Acta Mater., 2012, vol. 60, pp. 6183-99.10.1016/j.actamat.2012.07.064 ↗
25. H.F. Lan, L.X. Du, Q. Li, C.L. Qiu, J.P. Li, and R.D.K. Misra: J. Alloy Compd., 2017, vol. 710, pp. 702-10.10.1016/j.jallcom.2017.03.024 ↗
26. D. Kim, S.J. Lee, and B.C. De Cooman: Metall. Mater. Trans. A, 2012, vol. 43, pp. 4967-83.10.1007/s11661-012-1338-7 ↗
27. K. Chen, Z.H. Jiang, F.B. Liu, J. Yu. Y. Li, W. Gong, and C.Y. Chen: Mater. Sci. Eng. A, 2019, vol. 766, 138272..10.1016/j.msea.2019.138272 ↗
28. S. Yan, X.H. Liu, W.J. Liu, H.F. Lan, and H.Y. Wu: Mater. Sci. Eng. A, 2015, vol. 620, pp. 58-66.10.1016/j.msea.2014.09.047 ↗
29. M. Karam-Abian, A. Zarei-Hanzaki, H.R. Abedi, and S. Heshmati-Manesh: Mater. Sci. Eng. A, 2016, vol. 651, pp. 233-40.10.1016/j.msea.2015.10.116 ↗
30. J.L. Zhao, B. Lv, F.C. Zhang, Z.N. Yang, L.H. Qian, C. Chen, and X.Y Long: Mater. Sci. Eng. A, 2019, vol. 742, pp. 179-89.10.1016/j.msea.2018.11.004 ↗
31. Y.J Wei, Y.Q. Li, L.C. Zhu, Y. Liu, X.Q. Lei, G. Wang, Y.X. Wu, Z.L. Mi, J.B. Liu, H.T. Wang, and H.J. Gao: Nat. Commun., 2014, vol. 5, pp. 3580-07.10.1038/ncomms4580 ↗
32. J.Y. Meng, Y. Feng, Q. Zhou, L.J. Zhao, F.C. Zhang, and L.H. Qian: J. Mater. Eng. Perform., 2015, vol. 24, pp. 3068-76.10.1007/s11665-015-1567-1 ↗
33. B. Avishan, S. Yazdani, and S.H. Nedjad: Mater. Sci. Eng. A, 2012, vol. 548, pp. 106-11.10.1016/j.msea.2012.03.098 ↗
34. H. Mousalou, S. Yazdani, B. Avishan, N.P. Ahmadi, A. Chabok, and Y.T. Pei: Mater. Sci. Eng. A, 2018, vol. 734, pp. 329-37.10.1016/j.msea.2018.08.008 ↗
35. Z. Lawrynowicz: Mater. Sci. and Tech., 2002, vol. 18, pp. 1322-24.10.1179/026708302225007259 ↗
36. W. Song, J. Von Appen, P. Choi, R. Dronskowski, D. Raabe, and W. Bleck: Acta Mater., 2013, vol. 61, pp. 7582-90.10.1016/j.actamat.2013.08.051 ↗
37. Y. Toji, H. Matsuda, M. Herbig, P.P. Choi, and D. Raabe: Acta Mater., 2014, vol. 65, pp. 215-28.10.1016/j.actamat.2013.10.064 ↗
38. S.B. Singh, and H.K.D.H. Bhadeshia: Mater. Sci. Eng. A, 1998, vol. 245, pp. 72-79.10.1016/S0921-5093(97)00701-6 ↗
39. S. Zhang, and K.O. Findley: Acta Mater., 2013, vol. 61, pp. 1895-03.10.1016/j.actamat.2012.12.010 ↗
40. C. Garcia-Mateo, F.G. Caballero, T. Sourmail, M. Kuntz, J. Cornide, V. Smanio, and R. Elvira: Mater. Sci. Eng. A, 2012, vol. 549, pp. 185-92.10.1016/j.msea.2012.04.031 ↗
41. C.N. Hulme-Smith, I. Lonardelli, A.C. Dippel, and H.K.D.H. Bhadeshia: Scripta Mater., 2013, vol. 69, pp. 409-12.10.1016/j.scriptamat.2013.05.035 ↗
42. F.C. Zhang, T.S. Wang, P. Zhang, C.L. Zheng, B. Lv, M. Zhang and Y.Z. Zheng: Scripta Mater., 2008, vol. 59, pp. 294-96.10.1016/j.scriptamat.2008.03.024 ↗
43. S.W. Qin, Y. Liu, Q.G. Hao, Y, Wang, N.L. Chen, X.W. Zuo, and Y.H. Rong: Metall. Mater. Trans. A, 2015, vol. 46, pp. 4047-55.10.1007/s11661-015-3021-2 ↗
44. C.Y. Liu, X.J Di, C.X. Chen, X.J. Guo, and Z.K. Xue: J. Mater. Sci., 2015, vol. 50, pp. 5079-90.10.1007/s10853-015-9060-7 ↗
45. S. Takebayashi, T. Kunieda, N. Yoshinaga, K. Ushioda, and S. Ogata: ISIJ Int., 2010, vol. 50, pp. 875-82.10.2355/isijinternational.50.875 ↗
46. E. Keehan, L. Karlsson, and H.O. Andrén: Sci. Technol. of Weld. Joi., 2006, vol. 11, pp. 1-8.10.1179/174329306X77830 ↗
47. Z.Z. Zhao, H.X. Yin, A.M. Zhao, Z.Q. Gong, J.G. He, T.T. Tong, and H.J. Hu: Mater. Sci. Eng. A, 2014, vol. 613, pp. 8-16.10.1016/j.msea.2014.06.090 ↗
48. [48].Y.M. Kim, S.K. Kim, Y.J. Lim, and N.J. Kim: ISIJ Int., 2002, vol. 42, pp. 1571-77.10.2355/isijinternational.42.1571 ↗
49. P.J. Jacques, J. Ladrière, and F. Delannay: Metall. Mater. Trans. A, 2011, vol. 32, pp. 2759-68.10.1007/s11661-001-1027-4 ↗