journal article·2020-05

Microstructures and Nb-Rich Precipitation Behaviors of Inconel 718 Superalloy Under Sub-rapid Solidification Process

Wanlin Wang, Chenyang Zhu, Jie Zeng, Cheng Lu, Hairui Qian, Hui Xu, Peisheng Lyu

Publisher page

Abstract

The sub-rapid solidification behaviors of Inconel 718 superalloy with a novel droplet solidification technique were investigated by analyzing the heat transfer, macrostructure, microstructure, segregation, and precipitates. It is observed that the Nb-rich precipitates such as Laves phase and (Nb, Ti)C are formed in the interdendritic regions. The results suggest that droplet solidification method is an effective technique to improve the quality of Inconel 718 in terms of enhancing heat transfer, refining grains, reducing secondary dendrite arm spacing (SDAS) and Nb-rich precipitates. In addition, it is interestingly found that the heat flux and columnar grain zone increase, while the SDAS and volume fraction of Nb-rich precipitates decrease as the superheat increasing of 40 K, due to a larger contact area with the mold. Moreover, the quantitative relationship between the SDAS and volume fraction of Nb-rich precipitates is obtained.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (42)

Show source-provided references
1. S. Sui, J. Chen, L. Ma, W. Fan, H. Tan, F. Liu, and X. Lin: J. Alloys Compd., 2019, vol. 770, pp. 125-35.10.1016/j.jallcom.2018.08.063 ↗
2. K. Yuan, W. Guo, P. Li, J. Wang, Y. Su, X. Lin, and Y. Li: Mater. Sci. Eng. A, 2018, vol. 721, pp. 215-25.10.1016/j.msea.2018.02.014 ↗
3. M.M. Ma, Z.M. Wang, and X.Y. Zeng: Mater. Charact., 2015, vol. 106, pp. 420-27.10.1016/j.matchar.2015.06.027 ↗
4. C.H. Radhakrishna, and K.P. Rao: J. Mater. Sci., 1997, vol. 32, pp. 1977-84.10.1023/A:1018541915113 ↗
5. K. Sivaprasad, and S.G.S. Raman: Metall. Mater. Trans. A, 2008, vol. 39, pp. 2115-27.10.1007/s11661-008-9553-y ↗
6. H. Qi, M. Azer, and A. Ritter: Metall. Mater. Trans. A, 2009, vol. 40, pp. 2410-22.10.1007/s11661-009-9949-3 ↗
7. D. Zhang, W. Niu, X. Cao, and Z. Liu: Mater. Sci. Eng. A, 2015, vol. 644, pp. 32-40.10.1016/j.msea.2015.06.021 ↗
8. T. Antonsson, and H. Fredriksson: Metall. Mater. Trans. A, 2005, vol. 36, pp. 85-96.10.1007/s11663-005-0009-0 ↗
9. Y. Zhang, Z. Li, P. Nie, and Y. Wu: Metall. Mater. Trans. A, 2013, vol. 44, pp. 5513-21.10.1007/s11661-013-1903-8 ↗
10. P.G.Q. Netto, R.P. Tavares, M. Isac, and RIL Guthrie: ISIJ Int., 2001, vol. 41, pp. 1340-49.10.2355/isijinternational.41.1340 ↗
11. N. Stanford, T. Dorin, and P. D. Hodgson: Metall. Mater. Trans A, 2018, vol. 49, pp. 1021-25.10.1007/s11661-018-4509-3 ↗
12. P. Nolli: PhD thesis, Carnegie Mellon University, 2007.
13. L. Strezov, and J. Herbertson: ISIJ Int., 1998, vol. 38, pp. 959-66.10.2355/isijinternational.38.959 ↗
14. L. Strezov, J. Herbertson, and G.R. Belton: Metall. Mater. Trans B, 2000, vol. 31, pp. 1023-30.10.1007/s11663-000-0078-z ↗
15. P. Nolli, and A.W. Cramb: Metall. Mater. Trans. B, 2008, vol. 39, pp. 56-65.10.1007/s11663-007-9116-4 ↗
16. P. Nolli, and A.W. Cramb: ISIJ Int., 2007, vol. 47, pp. 1284-93.10.2355/isijinternational.47.1284 ↗
17. P.J. Felfer, C.R. Killmore, J. G. Williams, K. R. Carpenter, S. P. Ringer and J. M. Cairney: Acta Mater., 2012, vol. 60, pp. 5049-55.10.1016/j.actamat.2012.06.013 ↗
18. X. Lu, F. Fang, Y. X. Zhang, Y. Wang, G. Yuan, Y. B. Xu, G. M. Cao, R. D. K. Misra and G. D. Wang: Mater. Charact., 2017, vol. 126, pp. 125-34.10.1016/j.matchar.2017.02.022 ↗
19. H. T. Jiao, Y. B. Xu, W. Xiong, Y. X. Zhang, G. M. Cao, C. G. Li, J. Niu and R. D. K. Misra: Mater. Design, 2017, vol. 136, pp. 23-33.10.1016/j.matdes.2017.09.051 ↗
20. Y. Zhang, M. Lan,Y. Wang, F. Fang, X. Lu, G. Yuan, R.D.K.Misra and G. Wang: Mater. Charact., 2019, vol. 150, pp. 118-27.10.1016/j.matchar.2019.02.001 ↗
21. H. S. Wang, G. Yuan, Y. X. Zhang, G. M. Cao, C. G. Li, J. Kang, R. D. K. Misra and G. D. Wang: Mater. Sci. Eng. A, 2017, vol. 692, pp. 43-52.10.1016/j.msea.2017.03.064 ↗
22. Z. P. Xiong, A. A. Saleh, R. K. W. Marceau, A. S. Taylor, N. E. Stanford, A. G. Kostryzhev and E. V. Pereloma: Acta Mater., 2017, vol. 134, pp. 1-15.10.1016/j.actamat.2017.05.060 ↗
23. Z. P. Xiong, A. A. Saleh, A. G. Kostryzhev and E. V. Pereloma: J. Alloys Compd., 2017, vol. 721, pp. 291-306.10.1016/j.jallcom.2017.06.050 ↗
24. H. S. Wang, G. Yuan, J. Kang, G. M. Cao, C. G. Li, R. D. K. Misra and G. D. Wang: Mater. Sci. Eng. A, 2017, vol. 703, pp. 486-95.10.1016/j.msea.2017.07.092 ↗
25. C. Lu, W.L. Wang, J. Zeng, C.Y. Zhu and J. Chang: Metall. Mater. Trans. B, 2019, vol. 50, pp. 77-85.10.1007/s11663-018-1449-7 ↗
26. J. V. Beck and K. A. Woodbury: Meas. Sci. Technol., 1998, vol. 9, pp. 839-47.10.1088/0957-0233/9/6/001 ↗
27. D. Zhou, W. L. Wang, H. H. Zhang, F. J. Ma, K. Chen and L. J. Zhou: Metall. Mater. Trans. B, 2014, vol. 45, pp. 1048-56.10.1007/s11663-014-0058-3 ↗
28. H. H. Zhang and W. L. Wang: Metall. Mater. Trans. B, 2017, vol. 48, pp. 779-93.10.1007/s11663-016-0901-9 ↗
29. W.L. Wang, C.Y. Zhu, C. Lu, J. Yu, and L.J. Zhou: Metall. Mater. Trans. A, 2018, vol. 49, pp. 5524-34.10.1007/s11661-018-4850-6 ↗
30. C.Y. Zhu, W.L. Wang, and C. Lu: J. Alloys Compd., 2019, vol. 770, pp. 631-39.10.1016/j.jallcom.2018.08.153 ↗
31. M. Ferry: Woodhead Publishing, Cambridge, 2006.
32. C. Zhu, W. Wang, J. Zeng, C. Lu, L. Zhou and J. Chang: ISIJ Int., 2019, vol. 59, pp. 880-88.10.2355/isijinternational.ISIJINT-2018-747 ↗
33. L. Zhu, Z.F. Xu, P. Liu, Y.F. Gu: Opt. Laser Technol., 2018, vol. 98, pp. 409-15.10.1016/j.optlastec.2017.08.027 ↗
34. J. Zeng, W. Chen, W. Yan, Y. Yang, and A. McLean: Mater. Design, 2016, vol. 108, pp. 364-73.10.1016/j.matdes.2016.07.006 ↗
35. A. Wagner, B.A. Shollock, and M. McLean: Mater. Sci. Eng. A, 2004, vol. 374, pp. 270-79.10.1016/j.msea.2004.03.017 ↗
36. Z. Miao: PhD thesis, Shanghai Jiao Tong University, 2011.
37. X. You, Y. Tan, S. Shi, J. Yang, Y. Wang, J. Li, and Q. You: Mater. Sci. Eng. A, 2017, vol. 689, pp. 257-68.10.1016/j.msea.2017.01.093 ↗
38. J. Li, L. Yu, W. Sun, W. Zhang, F. Liu, F. Qi, S. Guo, and Z. Hu: Chinese J. Mater. Res., 2010, vol. 24, pp. 118-22.
39. D. Deng, R. Peng, H. Söderberg, and J. Moverare: Mater. Des, 2018, vol. 160, pp. 251-61.10.1016/j.matdes.2018.09.006 ↗
40. Y. Chen, F. Lu, K. Zhang, P. Nie, S.R.E. Hosseini, K. Feng, and Z. Li: J. Alloys Compd., 2016, vol. 670, pp. 312-21.10.1016/j.jallcom.2016.01.250 ↗
41. Z. Wang, K. Guan, M. Gao, X. Li, X. Chen and X. Zeng: J. Alloys Compd., 2012, vol. 513, pp. 518-23.10.1016/j.jallcom.2011.10.107 ↗
42. S.K. Choudhary, S. Ganguly, A. Sengupta, and V. Sharma: J. Mater. Process. Technol., 2017, vol. 243, pp. 312-21.10.1016/j.jmatprotec.2016.12.030 ↗