The Effect of Die Bearing Geometry on Surface Recrystallization During Extrusion of an Al-Mg-Si-Mn Alloy
Source abstract
Abstract
Abstract The formation of large surface grains known as peripheral coarse grains (PCG) is an undesirable feature commonly observed in extruded medium-strength Al-Mg-Si alloys produced for many applications including automotive. The objective of this study was to evaluate factors contributing to the formation of PCG layers, particularly the die bearing geometry, with the goal of developing strategies to eliminate or reduce this phenomenon. This was accomplished using a combination of extrusion trials and finite element method simulations to characterize the role of die bearing geometry on the formation of surface microstructure during the extrusion of an Al-Mg-Si-Mn alloy. The extrusion trials were conducted using two die bearing geometries, (i) a zero bearing die and (ii) a choke die using an extrusion temperature of 480 °C and ram velocities of 20 to 30 mm/s. Axisymmetric extrusion was conducted with an extrusion ratio of 16.5. During the extrusion trials, partially extruded billets were extracted from the extrusion press and water quenched in order to follow the evolution of the surface microstructure for the different bearing geometries. In addition, ram motion was arrested in the middle of the extruded length, held for 5 seconds and then resumed to investigate the role of changing the deformation conditions of the surface on the extruded microstructure. Optical microscopy and electron back-scattered scanning diffraction (EBSD) were used to quantify the microstructure and crystallographic texture of the extrudates and partially extruded billets at different spatial locations. A finite element (FE) mathematical model using the commercial software package DEFORM 2D was also developed to simulate the extrusion process so that loads, temperatures, and material flow patterns could be predicted. The FE model was used to track material flow streamlines close to the surface. Specific locations along these streamlines were then selected for EBSD analysis on the partially extruded billets. The results indicate that the major factor affecting the formation of the PCG layer is the local stored energy of the near surface material which in turn is a function of the details of the die bearing geometry.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgy and Material Forming · Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (22)
Show source-provided references
1. N. Parson, S. Barker, A. Shalanski and C. Jowett: Proceedings of the 8th International Aluminum Extrusion Technology Seminar, 2004, Orlando, FL.
2. L. De Peri Jr. and W. J. Misiolek, Acta Materialia, 2008, vol. 56, pp. 6174-6185.10.1016/j.actamat.2008.08.050 ↗
3. A.R. Eivani: PhD thesis, Delft University of Technology, 2010.
4. W. H. Van Geertruyden, H. M. Brown, W. Z. Misiolek and P. T. Wang, Metallurgical and Materials Transaction A, 2005, vol. 36A, pp. 1049-56.10.1007/s11661-005-0298-6 ↗
5. P. Saha, Aluminum Extrusion Technology, Ohio: ASM International, 2000.10.31399/asm.tb.aet.9781627083362 ↗
6. C. L. Liu, Q. Du, N. C. Parson and W. J. Poole, Scripta Materialia, 2018, vol. 152, pp. 59-63.10.1016/j.scriptamat.2018.04.012 ↗
7. I. Charit and I. S. Mishra, Scripta Materialia, 2008, vol. 58, pp. 367-371.10.1016/j.scriptamat.2007.09.052 ↗
8. M. Jarrett and N.C. Parson: UK Patent GB2285941, 1995.
9. X. Duan and T. Sheppard, Materials Science and Engineering, 2003, vol. A351, pp. 282-292.10.1016/S0921-5093(02)00840-7 ↗
10. N. Parson, A. Maltais and C. Jowett: Proceedings of Tenth International Aluminum Extrusion Technology Seminar (ET’12), 2012, Miami, FL.
11. Y. Mahmoodkhani: PhD thesis, University of Waterloo, Waterloo ON, Canada, 2013.
12. C. Liu: PhD thesis, University of British Columbia, Vancouver, BC, Canada, 2017.
13. Y. Mahmoodkhani, M. A. Wells, N. Parson and W. Poole, Journal of Materials Processing Technology, 2014, vol. 214, no. 3, pp. 688-700.10.1016/j.jmatprotec.2013.09.028 ↗
14. H. J. McQueen and N. D. Ryan, Materials Science and Engineering, 2002, vol. A322, pp. 43-63.10.1016/S0921-5093(01)01117-0 ↗
15. DEFORM v10.0 Database.
16. M. Schikorra, L. Donati, L. Tomesani and A. E. Tekkaya, Journal of Mechanical Science and Technology, 2007, vol. 21, pp. 1445-1451.10.1007/BF03177357 ↗
17. C. Jowett, Y. Mahmoodkhani, N. Parson and G. Garza: Eleventh International Aluminum Extrusion Technology Seminar (ET ‘16), 2016, Chicago, IL.
18. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, 2nd edn. Elsevier, Amsterdam, 2004.
19. F. Montheillet, M. Cohen and J. Jonas, Acta Metallurgica, 1984, vol. 32, p. 2077.10.1016/0001-6160(84)90187-1 ↗
20. G. R. Canova, U. F. Kocks and J. J. Jonas, Acta Metallurgica, 1984, vol. 32, p. 211.10.1016/0001-6160(84)90050-6 ↗
21. J. Chen: PhD thesis, The University of British Columbia, Vancouver BC, Canada, 2018.
22. W. H. van Geertruyden, W. Z. Misiolek and P. T. Wang, Journal of Materials Science, 2005, vol. 40, pp. 3861-3863.10.1007/s10853-005-2545-z ↗