Effects of AlN Nanoparticles on the Microstructure, Solderability, and Mechanical Properties of Sn-Ag-Cu Solder
Source abstract
Abstract
The addition of nanosized AlN particles to Sn-3.0 wt pctAg-0.5 wt pctCu (SAC305) lead-free solder alloy has been investigated. The various weight fractions of AlN (0, 0.03, 0.12, 0.21, 0.60 wt pct) have been dispersed in SAC305 solder matrix by a mechanical mixing and melting route. The influences of AlN nanosized particles on the microstructure, mechanical properties, and solderability (e.g., spreadability and wettability) have been carried out. The structural and morphological features of the nanocomposite solder were characterized by scanning electron microscope (SEM), energy dispersive spectroscopy (EDS), and transmission electron microscope (TEM). The experimental results show that the best combination of solderability and mechanical properties is obtained at 0.21 wt pct AlN in the solder matrix. The reinforced composite solder with 0.21 wt pct AlN nanoparticles shows ≈25 pct improvement in ultimate tensile strength (UTS), and ≈4 pct increase in the spreadability. In addition, the results of microstructural analyses of composite solders indicate that the nanocomposite solder, especially reinforced with 0.21 wt pct of AlN nanoparticles, exhibits better microstructure and improved elongation percentage, compared with the monolithic SAC305 solder.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Electronic Packaging and Soldering Technologies · Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (60)
Show source-provided references
1. M. Abtew and G. Selvaduray: Mater. Sci. Eng. R, 2000, vol. 27, pp. 95–141.10.1016/S0927-796X(00)00010-3 ↗
2. K. Zeng and K. N. Tu: Mater. Sci. Eng. R, 2002, vol. 38, pp. 55–105.10.1016/S0927-796X(02)00007-4 ↗
3. C. Y. Lin, U. S. Mohanty and J. H. Chou: J. Alloy. Compd., 2010, vol. 501, pp. 204–10.10.1016/j.jallcom.2010.04.111 ↗
4. L. R. Garcia, W. R. Osorio, L. C. Peixoto and A. Garcia: J. Electron. Mater., 2009, vol. 38, pp. 2405–14.10.1007/s11664-009-0888-y ↗
5. T. T. Nguyen, D. Yu and S. B. Park: J. Electron. Mater., 2011, vol. 40, pp. 1409–15.10.1007/s11664-011-1534-z ↗
6. I. Shohji, T. Yoshida, T. Takahashi and S. Hioki: Mater. Trans. A, 2002, vol. 43, pp. 1854–57.10.2320/matertrans.43.1854 ↗
7. A. Sharma, S. Das and K. Das: Electrodeposition of Composite Materials, Dr. A.M.A Mohamed, ed., InTech, 2016, DOI:10.5772/62036. Available from: http://www.intechopen.com.10.5772/62036 ↗
8. S. Chen, L. Zhang, J. Liu, Y. Gao and Q. Zhai: Mater. Trans. A, 2010, vol. 51, pp. 1720–6.10.2320/matertrans.MJ201002 ↗
9. S. M. L. Nai, J. V. M. Kuma, M. E. Alam, X. L. Zhong, P. Babaghorbani and M. Gupta: J. Mater. Eng. Perf., 2010, vol. 19, pp. 335–41.10.1007/s11665-009-9481-z ↗
10. A. Sharma, Y. J. Jang, J.B. Kim and J.P. Jung: J. Alloy. Compd., 2017, vol. 704, pp. 795–803.10.1016/j.jallcom.2017.02.036 ↗
11. A. Sharma, S. Kumar, D. H. Jung and J. P. Jung: J. Mater. Sci.: Mater. Electron., 2017, vol. 28, 8116.
12. H. Y. Lee, A. Sharma, S. H. Kee, Y. W. Lee, J. T. Moon and J. P. Jung: Electron. Mater. Lett., 2014, vol. 10, pp. 997–1004.10.1007/s13391-014-3364-7 ↗
13. L. C. Taso, C. H. Huang, C. H. Chuang, and R. S. Chen: Mater. Sci. Eng., 2012, vol. 545, pp. 194–200.10.1016/j.msea.2012.03.025 ↗
14. J. Shen and Y. C. Chan: Microelectron. Reliab., 2009, vol. 49, pp. 223–34.10.1016/j.microrel.2008.10.004 ↗
15. S. M. L. Nai, J. Wei and M. Gupta: Thin. Solid. Films., 2006, vol. 504, pp. 401–04.10.1016/j.tsf.2005.09.057 ↗
16. H. R. Kotadia, O. Mokhtari, M. P. Clode, M. A. Green and S. H. Mannan: J. Alloy. Compd., 2012, vol. 511, pp. 176–88.10.1016/j.jallcom.2011.09.024 ↗
17. T. Fouzder, I. Shafiq, Y. C. Chan, A. Sharif and W. K. C. Yung: J. Alloy. Compd., 2011 vol. 509, pp. 1885–92.10.1016/j.jallcom.2010.10.081 ↗
18. E. M. N. Ervina, A. Singh and Y. T. Chuan: Solder. Surf. Mt. Tech., 2013, vol. 25, pp. 229–41.10.1108/SSMT-11-2012-0026 ↗
19. C. L. Chuang, L. C. Tsao, H. K. Lin and L. P. Feng: Mater. Sci. Eng. A, 2012, vol. 558, pp. 478–84.10.1016/j.msea.2012.08.031 ↗
20. A. Sharma, S. Das and K. Das: Surf. Coat. Technol., 2015, vol. 261, pp. 235–43.10.1016/j.surfcoat.2014.11.023 ↗
21. A. Sharma, D. E. Xu, J. Chow, M. Mayer, H. R. Sohn and J. P. Jung: Electron. Mater. Lett., 2015, vol. 11, pp. 1072–77.10.1007/s13391-015-4454-x ↗
22. A. Sharma, S. Mallik, N. Ekere and J.P. Jung: J. Microelectron. Packag. Soc., 2014, vol. 21,, pp. 83–9. doi:10.6117/kmeps.2014.21.4.08310.6117/kmeps.2014.21.4.083 ↗
23. S. M. L. Nai, J. Wei and M. Gupta: J. Electron. Mater., 2006, vol. 35, pp. 1518–22.10.1007/s11664-006-0142-9 ↗
24. A. A. El-Daly, W. M. Desoky, T. A. Elmosalami, M. G. El-Shaarawy and A. M. Abdraboh: Mater. Design, 2015, vol. 65, pp. 1196–204.10.1016/j.matdes.2014.08.058 ↗
25. L. C. Tsao and S. Y. Chang: Mater. Design, 2010, vol. 31, pp. 990–3.10.1016/j.matdes.2009.08.008 ↗
26. A. A. El-Daly, T. A. Elmosalami, W. M. Desoky, M. G. El-Shaarawy and A. M. Abdraboh: Mater. Sci. Eng. A, 2014, vol. 618, pp. 389–97.10.1016/j.msea.2014.09.028 ↗
27. A. K. Gain, Y. C. Chan and W. K. C. Yung: Microelectron. Reliab., 2011, Vol. 51, pp. 2306–13.10.1016/j.microrel.2011.03.042 ↗
28. A. Sharma, B. G. Baek and J. P. Jung: Mater. Design, 2015, vol. 87, pp. 370–9.10.1016/j.matdes.2015.07.137 ↗
29. K. Strecker and M. J. Hoffmann: J. Eur. Ceram. Soc., 2005, vol. 25, pp. 801–7.10.1016/j.jeurceramsoc.2004.01.024 ↗
30. J. Hu, H. Xiao, W. Guo, Q. Li, W. Xie and B. Zhu: Ceram. Int., 2014, vol. 40, pp. 1065–71.10.1016/j.ceramint.2013.06.105 ↗
31. R. K. Goyal, A. N. Tiwari, U. P. Mulik and Y. S. Negi: Compos. A, 2007, vol. 38, pp. 516–24.10.1016/j.compositesa.2006.02.017 ↗
32. B. Abdallah, C. Duquenne, M. P. Besland, E. Gautron, P. Y. Jouan, P. Y. Tessier, J. Brault, Y. Cordier and M. A. Djouadi: Eur. Phys. J. Appl. Phys., 2008, vol. 43, pp. 309–13.10.1051/epjap:2008082 ↗
33. JIS: Test methods for soldering fluxes, JIS Z 3197:2012, Japanese Standards Association, 2012.
34. A. Sharma, H. R. Sohn and J. P. Jung: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 494–503.10.1007/s11661-015-3214-8 ↗
35. P. A. Meenan, S. R. Anderson and D. L. Klug: in Handbook of Industrial Crystallization, A. S. Myerson, ed. Elsevier, Amsterdam, 2001, pp. 67–100
36. J. Shen, Y. C. Liu, Y. J. Han, Y. M. Tian and H. X. Gao: J. Electron. Mater., 2006, vol. 35, pp. 1672–9.10.1007/s11664-006-0216-8 ↗
37. A. Sharma, S. Bhattacharya, S. Das and K. Das: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5587–5601.10.1007/s11661-013-1894-5 ↗
38. Q. J. Zhai, S. K. Guan and Q. Y. Shang: Alloy Thermo-Mechanism: Theory and Application, Metallurgy Industry Press, Beijing, 1999.
39. R. Casati and M. Vedani: Metals, 2014, vol. 4, pp. 65–83.10.3390/met4010065 ↗
40. K, Chu, Z. Liu, C. Jia, H. Chen, X. Liang, W. Gao, W. Tian and H. Guo: J. Alloy. Compd., 2010, vol. 490, pp. 453–8.10.1016/j.jallcom.2009.10.040 ↗
41. A. S. M. A. Haseeb, M. M. Arafat and M. R. Johan: Mater. Charact., 2012, vol. 64, pp. 27–35.10.1016/j.matchar.2011.11.006 ↗
42. L. Wang, D. Q. Yu, J. Zhao and M. L. Huang: Mater. Lett., 2002, vol. 56, pp. 1039–42.10.1016/S0167-577X(02)00672-9 ↗
43. W. Zhang, Y. Zhong and C. Wang: J. Mater. Sci. Technol., 2012, vol. 28, pp. 661–65.10.1016/S1005-0302(12)60113-3 ↗
44. D. Q. Yu, J. Zhao and L. Wang: J. Alloy. Compd., 2004, vol. 376, pp. 170–75.10.1016/j.jallcom.2004.01.012 ↗
45. J. Wu, S. B. Xue, J. W. Wang, S. Liu, Y. L. Han and L. J. Wang: J. Mater. Sci.: Mater. Electron., 2016, vol. 27, pp. 1–35.
46. D.R. Frear: Jom. J. Min. Met. Mat. S, 1996, vol. 48, pp. 49–53.10.1007/BF03222944 ↗
47. P. Sebo and P. Stefanik: Kovove Mater., 2005, vol. 43, pp. 202–09.
48. T. Siewert, S. Liu, D. R. Smith, and J. C. Madeni: Database for Solder Properties with Emphasis on New Lead-free Solders, NIST, Colorado, 2002.
49. M. Rashad, F. Pan, A. Tang and M. Asif: Proc. Natl. Sci.: Mater. Int., 2014, vol. 24, pp. 101–08.10.1016/j.pnsc.2014.03.012 ↗
50. N. Ramakrishnan: Acta Mater., 1996, vol. 44, pp. 69–77.10.1016/1359-6454(95)00150-9 ↗
51. L. H. Dai, Z. Ling and Y. L. Bai: Compos. Sci. Technol., 2001, vol. 61, pp. 1057–63.10.1016/S0266-3538(00)00235-9 ↗
52. S. Chantaramanee, S. Wisutmethangoon, L. Sikong and T. Plookphol: J. Mater. Sci.: Mater. Electron., 2013, vol. 24, pp. 3707–15.
53. C. S. Goh, J. Wei, L. C. Lee and M. Gupta: Acta Mater., 2007, vol. 55, pp. 5115–21.10.1016/j.actamat.2007.05.032 ↗
54. P. Babaghorbani, S. M. L. Nai and M. Gupta: J. Mater. Sci.: Mater. Electron., 2009, vol. 20, pp. 571–6.
55. P. Liu, P. Yao and J. Liu: J. Electron. Mater., 2008, vol. 37, pp. 874–9.10.1007/s11664-007-0366-3 ↗
56. A. Sharma, S. Bhattacharya, S. Das, H. J. Fecht and K. Das: J. Alloy. Compd., 2013, vol. 574, pp. 609–16.10.1016/j.jallcom.2013.06.023 ↗
57. R. J. Arsenault and N. Shi: Mater. Sci. Eng. A, 1986, vol. 81, 175–87.10.1016/0025-5416(86)90261-2 ↗
58. S. R. Bakshi and A. Agarwal: Carbon, 2011, vol. 49, pp. 533–44.10.1016/j.carbon.2010.09.054 ↗
59. C. S. Goh, J. Wei, L. C. Lee and M. Gupta: Mater. Sci. Eng. A, 2006, vol. 423, pp. 153–6.10.1016/j.msea.2005.10.071 ↗
60. K. S. Kim, S. H. Huh and K. Suganuma: Mater. Sci. Eng. A, 2002, vol. 333, pp. 106–14.10.1016/S0921-5093(01)01828-7 ↗