journal article·2017-04

Indentation Pileup Behavior of Ti-6Al-4V Alloy: Experiments and Nonlocal Crystal Plasticity Finite Element Simulations

Fengbo Han, Bin Tang, Xu Yan, Yifei Peng, Hongchao Kou, Jinshan Li, Ying Deng, Yong Feng

Publisher page

Abstract

This study reports on the indentation pileup behavior of Ti-6Al-4V alloy. Berkovich nanoindentation was performed on a specimen with equiaxed microstructure. The indented area was characterized by electron backscattered diffraction (EBSD) to obtain the indented grain orientations. Surface topographies of several indents were measured by atomic force microscopy (AFM). The pileup patterns on the indented surfaces show significant orientation dependence. Corresponding nonlocal crystal plasticity finite element (CPFE) simulations were carried out to predict the pileup patterns. Analysis of the cumulative shear strain distributions and evolutions for different slip systems around the indents found that the pileups are mainly caused by prismatic slip. The pileup patterns evolve with the loading and unloading process, and the change in pileup height due to the elastic recovery at unloading stage is significant. The density distributions of geometrically necessary dislocations (GNDs) around the indent were predicted. Simulation of nanoindentation on a tricrystal model was performed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Microstructure and mechanical properties · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (22)

Show source-provided references
1. A.A. Elmustafa and D.S. Stone, J. Mech. Phys. Solids 2003, vol. 51, pp. 357-381.10.1016/S0022-5096(02)00033-9 ↗
2. Y. Wang, D. Raabe, C. Klüber and F. Roters, Acta Mater. 2004, vol. 52, pp. 2229-2238.10.1016/j.actamat.2004.01.016 ↗
3. G.B. Viswanathan, E. Lee, D.M. Maher, S. Banerjee and H.L. Fraser, Acta Mater. 2005, vol. 53, pp. 5101-5115.10.1016/j.actamat.2005.07.030 ↗
4. N. Zaafarani, D. Raabe, R.N. Singh, F. Roters and S. Zaefferer, Acta Mater. 2006, vol. 54, pp. 1863-1876.10.1016/j.actamat.2005.12.014 ↗
5. A.F. Gerday, M. Ben Bettaieb, L. Duchêne, N. Clément, H. Diarra and A.M. Habraken, Acta Mater. 2009, vol. 57, pp. 5186-5195.10.1016/j.actamat.2009.07.020 ↗
6. C. Reuber, P. Eisenlohr, F. Roters and D. Raabe, Acta Mater. 2014, vol. 71, pp. 333-348.10.1016/j.actamat.2014.03.012 ↗
7. B. Selvarajou, J.H. Shin, T.K. Ha, I. Choi, S.P. Joshi and H.N. Han, Acta Mater. 2014, vol. 81, pp. 358-376.10.1016/j.actamat.2014.08.042 ↗
8. F.B. Han, B. Tang, H.C. Kou, J.S. Li and Y. Feng, Materials Science and Engineering: A 2015, vol. 625, pp. 28-35.10.1016/j.msea.2014.11.090 ↗
9. M. Liu, A.K. Tieu, C. Lu, H.T. Zhu and G.Y. Deng, Comput. Mater. Sci. 2014, vol. 81, pp. 30-38.10.1016/j.commatsci.2013.05.030 ↗
10. C. Zambaldia, Y.Y. Yang, T.R. Bieler and D. Raabe, J. Mater. Res 2012, vol. 27, p. 357.
11. C. Zambaldi and D. Raabe, Acta Mater. 2010, vol. 58, pp. 3516-3530.10.1016/j.actamat.2010.02.025 ↗
12. T Seshacharyulu, S.C. Medeiros, W.G. Frazier and Y. Prasad, Materials Science and Engineering: A 2000, vol. 284, pp. 184-194.10.1016/S0921-5093(00)00741-3 ↗
13. M. Vanderhasten, L. Rabet and B. Verlinden, Materials & design 2008, vol. 29, pp. 1090-1098.10.1016/j.matdes.2007.06.005 ↗
14. T.I. Wu and J.C. Wu, J. Alloys Compd. 2008, vol. 466, pp. 153-159.10.1016/j.jallcom.2007.11.045 ↗
15. G.B. Viswanathan, E. Lee, D.M. Maher, S. Banerjee and H.L. Fraser, Materials Science and Engineering: A 2005, vol. 400–401, pp. 463-466.10.1016/j.msea.2005.02.070 ↗
16. R.J. Asaro and A. Needleman, Acta Metall. 1985, vol. 33, pp. 923-953.10.1016/0001-6160(85)90188-9 ↗
17. D. Peirce, R.J. Asaro and A. Needleman, Acta Metall. 1983, vol. 31, pp. 1951-1976.10.1016/0001-6160(83)90014-7 ↗
18. J.W. Hutchinson, Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences 1976, vol. 348, pp. 101-127.10.1098/rspa.1976.0027 ↗
19. A. Acharya and A.J. Beaudoin, J. Mech. Phys. Solids 2000, vol. 48, pp. 2213-2230.10.1016/S0022-5096(00)00013-2 ↗
20. M. Anahid, M.K. Samal and S. Ghosh, J. Mech. Phys. Solids 2011, vol. 59, pp. 2157-2176.10.1016/j.jmps.2011.05.003 ↗
21. F. Bachmann, R. Hielscher and H. Schaeben, Solid State Phenomena 2010, vol. 160, pp. 63-68.10.4028/www.scientific.net/SSP.160.63 ↗
22. F. Bridier, D.L. McDowell, P. Villechaise and J. Mendez, Int. J. Plast 2009, vol. 25, pp. 1066-1082.10.1016/j.ijplas.2008.08.004 ↗