journal article·2015-11

On the Mechanisms of Different Work-Hardening Stages in Twinning-Induced Plasticity Steels

Peng Zhou, Ming Xin Huang

Publisher page

Abstract

The detailed work-hardening behaviors of two twinning-induced plasticity (TWIP) steels with and without Al addition are investigated. The work-hardening rate curves of both TWIP steels can be divided into three stages. The dominant work-hardening mechanism is different at different stages. Dynamic strain aging (DSA) is responsible for the high work-hardening rate at the very beginning of the first stage for the TWIP steel without Al, but the DSA’s contribution is not significant in the TWIP steel with Al. However, DSA may only play a dominant role at the early plastic deformation. For the strain higher than 3 pct in the first stage, the difference of work-hardening rate between the two TWIP steels becomes smaller. This suggests that the main work-hardening mechanism in the first stage changes to the multiplication of dislocations at strains higher than 3 pct in TWIP steel without Al. The increase of work-hardening rate in the second stage is mainly due to the formation of deformation twins in both TWIP steels. Nevertheless, comparing to the TWIP steel without Al, TWIP steel with Al shows a lower work-hardening rate at the second stage. This is due to the fact that the addition of Al increases the critical twinning stress, resulting in a lower twinning capability. Deformation twin plays a more and more important role on the work-hardening with the increase of strain in the second stage due to the increase of twin volume fraction with strain. It is found that, except being obstacles to the dislocation glide, deformation twins can also act as a new source of the emission of partial dislocations. Furthermore, it is also found that dislocations can transmit across the twin boundary and be stored in the twins, implying that deformation twins can also accommodate local strains.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. O. Bouaziz, S. Allain, C. P. Scott, P. Cugy and D. Barbier, Current Opinion in Solid State and Materials Science 2011, vol. 15, pp. 141-168.10.1016/j.cossms.2011.04.002 ↗
2. O. Bouaziz, H. Zurob and M.X. Huang, Steel Res. Int. 2013, vol. 84, pp. 937-947.10.1002/srin.201200288 ↗
3. B. C. De Cooman, O. Kwon and K. G. Chin, Materials Science and Technology 2012, vol. 28, pp. 513-527.10.1179/1743284711Y.0000000095 ↗
4. S. Allain, J. P. Chateau and O. Bouaziz, Mater. Sci. Eng., A 2004, vol. 387-389, pp. 143-147.10.1016/j.msea.2004.01.060 ↗
5. O. Bouaziz, S. Allain and C. Scott, Scripta Materialia 2008, vol. 58, pp. 484-487.10.1016/j.scriptamat.2007.10.050 ↗
6. O. Bouaziz and N. Guelton, Mater. Sci. Eng., A 2001, vol. 319-321, pp. 246-249.10.1016/S0921-5093(00)02019-0 ↗
7. Emin Bayraktar, Fazal A. Khalid and Christophe Levaillant, Journal of Materials Processing Technology 2004, vol. 147, pp. 145-154.10.1016/j.jmatprotec.2003.10.007 ↗
8. H. Beladi, I. B. Timokhina, Y. Estrin, J. Kim, B. C. De Cooman and S. K. Kim, Acta Mater. 2011, vol. 59, pp. 7787-7799.10.1016/j.actamat.2011.08.031 ↗
9. J. Kim, Y. Estrin, H. Beladi, I. Timokhina, K. G. Chin, S. K. Kim and B. C. De Cooman, Metall. Mater. Trans. A 2011, vol. 43, pp. 479-90
10. G. Dini, R. Ueji, A. Najafizadeh and S. M. Monir-Vaghefi, Mater. Sci. Eng., A 2010, vol. 527, pp. 2759-2763.10.1016/j.msea.2010.01.033 ↗
11. I. Gutierrez-Urrutia and D. Raabe, Acta Mater. 2011, vol. 59, pp. 6449-6462.10.1016/j.actamat.2011.07.009 ↗
12. Bevis Hutchinson and Norman Ridley, Scripta Mater. 2006, vol. 55, pp. 299-302.10.1016/j.scriptamat.2006.05.002 ↗
13. L. Chen, H.S. Kim, S. K. Kim and B. C. De Cooman, ISIJ Int. 2007, vol. 47, pp. 1804-1812.10.2355/isijinternational.47.1804 ↗
14. K. Renard, S. Ryelandt and P. J. Jacques, Materials Science and Engineering: A 2010, vol. 527, pp. 2969-2977.10.1016/j.msea.2010.01.037 ↗
15. T. Shun, C.M. Wan and J.G. Byrne, Acta Metall. Mater. 1992, vol. 40, pp. 3407-3412.10.1016/0956-7151(92)90054-I ↗
16. M. Koyama, T. Sawaguchi, T. Lee, C. S. Lee and K. Tsuzaki, Mater. Sci. Eng., A 2011, vol. 528, pp. 7310-731610.1016/j.msea.2011.06.011 ↗
17. J.K. Kim, L. Chen, H.S. Kim, S.K. Kim, Y. Estrin and B. C. De Cooman, Metall. Mater. Trans. A 2009, vol. 40, pp. 3147-3158.10.1007/s11661-009-9992-0 ↗
18. Y.S. Chun, K.-T. Park and C.S. Lee, Scripta Mater. 2012, vol. 66, pp. 960-6510.1016/j.scriptamat.2012.02.038 ↗
19. B. C. De Cooman, Jinkyung Kim and Seil Lee, Scripta Mater. 2012, vol. 66, pp. 986-991.10.1016/j.scriptamat.2012.02.028 ↗
20. J. S. Jeong, W. Woo, K. H. Oh, S. K. Kwon and Y. M. Koo, Acta Mater. 2012, vol. 60, pp. 2290-2299.10.1016/j.actamat.2011.12.043 ↗
21. J. E. Jin and Y. K. Lee, Acta Mater. 2012, vol. 60, pp. 1680-1688.10.1016/j.actamat.2011.12.004 ↗
22. S. Allain, J. P. Chateau, O. Bouaziz, S. Migot and N. Guelton, Mater. Sci. Eng., A 2004, vol. 387-389, pp. 158-162.10.1016/j.msea.2004.01.059 ↗
23. A. Saeed-Akbari, A. Schwedt and W. Bleck, Scripta Mater. 2012, vol. 66, pp. 1024-1029.10.1016/j.scriptamat.2011.12.041 ↗
24. H. Idrissi, L. Ryelandt, M. Veron, D. Schryvers and P. J. Jacques, Scripta Mater. 2009, vol. 60, pp. 941-944.10.1016/j.scriptamat.2009.01.040 ↗
25. K. T. Park, K. G. Jin, S. H. Han, S. W. Hwang, K. Choi and C. S. Lee, Mater. Sci. Eng., A 2010, vol. 527, pp. 3651-366110.1016/j.msea.2010.02.058 ↗
26. K. J. H. Al-Fadhalah, C.-M. Li, A. J. Beaudoin, D. A. Korzekwa, I. M. Robertson, Acta Mater. 2008, vol. 56, pp. 5764-577410.1016/j.actamat.2008.07.050 ↗
27. Y. T. Zhu, J. Narayan, J. P. Hirth, S. Mahajan, X. L. Wu and X. Z. Liao, Acta Mater. 2009, vol. 57, pp. 3763-3770.10.1016/j.actamat.2009.04.020 ↗
28. Y. T. Zhu, X. L. Wu, X. Z. Liao, J. Narayan, L. J. Kecskés and S. N. Mathaudhu, Acta Materialia 2011, vol. 59, pp. 812-821.10.1016/j.actamat.2010.10.028 ↗
29. A. Dumay, J. P. Chateau, S. Allain, S. Migot and O. Bouaziz, Mater. Sci. Eng., A 2008, vol. 483-484, pp. 184-187.10.1016/j.msea.2006.12.170 ↗
30. P. Rodriguez, Bull. Mater. Sci. 1984, vol. 6, pp. 653-663.10.1007/BF02743993 ↗
31. D. Barbier, N. Gey, S. Allain, N. Bozzolo and M. Humbert, Materials Science and Engineering: A 2009, vol. 500, pp. 196-206.10.1016/j.msea.2008.09.031 ↗
32. I. Gutierrez-Urrutia and D. Raabe, Acta Mater. 2012, vol. 60, pp. 5791-5802.10.1016/j.actamat.2012.07.018 ↗
33. Jae-Eun Jin and Young-Kook Lee, Mater. Sci. Eng., A 2009, vol. 527, pp. 157-161.10.1016/j.msea.2009.08.028 ↗
34. H. K. Yang, Z. J. Zhang and Z. F. Zhang, Scripta Mater. 2013, vol. 68, pp. 992-995.10.1016/j.scriptamat.2013.02.060 ↗
35. Y. T. Zhu, X. Z. Liao and X. L. Wu, Progress in Materials Science 2012, vol. 57, pp. 1-62.10.1016/j.pmatsci.2011.05.001 ↗
36. I. Gutierrez-Urrutia and D. Raabe, Scripta Mater. 2013, vol. 68, pp. 343-347.10.1016/j.scriptamat.2012.08.038 ↗
37. H. Mecking and U.F. Kocks, Acta Metall. 1981, vol. 29, pp. 1865-1875.10.1016/0001-6160(81)90112-7 ↗
38. Mingxin Huang, Olivier Bouaziz, David Barbier and Sebastien Allain, Journal of Materials Science 2011, vol. 46, pp. 7410-7414.10.1007/s10853-011-5703-5 ↗
39. Jinichiro Nakano and Pascal J. Jacques, Calphad 2010, vol. 34, pp. 167-175.10.1016/j.calphad.2010.02.001 ↗
40. A. Saeed-Akbari, J. Imlau, U. Prahl and W. Bleck, Metall. Mater. Trans. A 2009, vol. 40, pp. 3076-3090.10.1007/s11661-009-0050-8 ↗
41. I. Gutierrez-Urrutia, S. Zaefferer and D. Raabe, Mater. Sci. Eng., A 2010, vol. 527, pp. 3552-3560.10.1016/j.msea.2010.02.041 ↗
42. T.S. Byun, Acta Mater. 2003, vol. 51, pp. 3063-3071.10.1016/S1359-6454(03)00117-4 ↗
43. S. Z. Wu, H. W. Yen, M. X. Huang and A. H. W. Ngan, Scripta Mater. 2012, vol. 67, pp. 641-644.10.1016/j.scriptamat.2012.07.023 ↗
44. H. Idrissi, K. Renard, D. Schryvers and P. J. Jacques, Scripta Mater. 2010, vol. 63, pp. 961-964.10.1016/j.scriptamat.2010.07.016 ↗