journal article·2015-03

Wear Characteristics of Ni-Based Hardfacing Alloy Deposited on Stainless Steel Substrate by Laser Cladding

Reena Awasthi, P. K. Limaye, Santosh Kumar, Ram P. Kushwaha, C. S. Viswanadham, Dinesh Srivastava, N. L. Soni, R. J. Patel, G. K. Dey

Publisher page

Abstract

In this study, dry sliding wear characteristics of the Ni-based hardfacing alloy (Ni-Mo-Cr-Si) deposited on stainless steel SS316L substrate by laser cladding have been presented. Dry sliding wear behavior of the laser clad layer was evaluated against two different counter bodies, AISI 52100 chromium steel (~850 VHN) and tungsten carbide ball (~2200 VHN) to study both adhesive and abrasive wear characteristics, in comparison with the substrate SS316L using ball on plate reciprocating wear tester. The wear resistance was evaluated as a function of load and sliding speed for a constant sliding amplitude and sliding distance. The wear mechanisms were studied on the basis of wear surface morphology and microchemical analysis of the wear track using SEM–EDS. Laser clad layer of Ni-Mo-Cr-Si on SS316L exhibited much higher hardness (~700 VHN) than that of substrate SS316L (~200 VHN). The laser clad layer exhibited higher wear resistance as compared to SS316L substrate while sliding against both the counterparts. However, the improvement in the wear resistance of the clad layer as compared to the substrate was much higher while sliding against AISI 52100 chromium steel than that while sliding against WC, at the same contact stress intensity.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Entropy Alloys Studies · Metal Alloys Wear and Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (30)

Show source-provided references
1. A. Frenk and W. Kurz, Mater. Sci. Eng. A, 1993, Vol.173, pp. 339–42.10.1016/0921-5093(93)90240-F ↗
2. A. Tiziani, L. Giordano, P. Matteazzi and B. Badan: Mater. Sci. Eng., 1987, vol. 88, pp. 171–75.10.1016/0025-5416(87)90082-6 ↗
3. S. Atamert and H. K. D. H. Bhadeshia, Metall. Trans. A, 1989, vol. 20A, pp. 1037–53.10.1007/BF02650140 ↗
4. A. F.M. Arif and B. S. Yilbas, J. Mater. Eng. Perfor., 2008, vol. 17, pp. 644–50.10.1007/s11665-008-9204-x ↗
5. R.D. Schmidt and D.P. Ferriss, Wear, 1975, vol.32, pp. 279–8910.1016/0043-1648(75)90316-6 ↗
6. J. R. Devis, Nickel, Cobalt and Their Alloys, ASM International, Materials park, 2000.
7. A. Halstead and R. D. Rawlings, Met. Sci.Technol., 1984, vol.18, pp. 491–500.10.1021/es00125a002 ↗
8. S.E. Mason and R.D. Rawlings, Mater. Sci. Technol., 1989, vol.5, pp.180–85.10.1179/mst.1989.5.2.180 ↗
9. Reena Awsathi, Santosh Kumar, D. Srivastava and G.K.Dey, Pramana-J. Phys., 2010, Vol. 75, pp 1259–66.10.1007/s12043-010-0215-4 ↗
10. R. Awasthi, S. Kumar, K. Chandra, B. Viswanadh, R. Kishore, C.S. Viswanadham, D. Srivastava, and G.K. Dey: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 4688–470210.1007/s11661-012-1290-6 ↗
11. Z.A. Foroulis, Wear, 1984, vol. 96, pp. 203–18.10.1016/0043-1648(84)90094-2 ↗
12. T. A. Wolfla and R. C. Tucker, Thin Solid Films, 1978, vol. 53, pp. 353–64.10.1016/0040-6090(78)90228-6 ↗
13. J. Vikstrom, Wear, 1994, vol.179, pp.143–46.10.1016/0043-1648(94)90232-1 ↗
14. E.K. Ohriner, T. Wada, E.P. Wehlan, and H. Ocken (1991) Metall. Trans. A 22A:983–9110.1007/BF02661091 ↗
15. J.J. Demo, Jr. and D.P. Ferriss: E.I. du Pont de Nemours and Company, Wilmington, DE, U.S. Patent, 1974.
16. Santosh Kumar, G.L.Goswami, Laser Eng., 2006, vol 16, pp 305–15.
17. R. N. Johnson and D. G. Farwick: Thin solid films, 1978, vol. 53, pp. 365–7310.1016/0040-6090(78)90229-8 ↗
18. G.L. Goswami, S. Kumar, R. Galun, B.L. Mordike, Lasers Eng., 2003; vol. 13, pp. 1–12.
19. C. Navas, M. Cadenas, J.M. Cuetos: J. Damborenea Wear, 2006, vol. 260, pp 838–46.10.1016/j.wear.2005.04.020 ↗
20. J. Przybylowicz, J. Kusinski, Surface Coat. Technol., 2000, vol. 125, pp. 13–18.10.1016/S0257-8972(99)00563-0 ↗
21. M.X. Yao, J.B.C. Wu, S. Yick, Y. Xie, R. Liu, Mater. Sci. Eng. A, 2006, vol. 435, pp. 78–8310.1016/j.msea.2006.07.054 ↗
22. G. Bolelli and L. Lusvarghi, J. Therm. Spray Technol., 2006, vol. 15(4), pp. 802–10.10.1361/105996306X146721 ↗
23. G. Bolelli, V. Cannillo, L. Lusvarghi, M. Montorsi, F.P. Mantini, and M. Barletta: Wear, 2007, vol. 263, pp. 1397–416.10.1016/j.wear.2006.12.002 ↗
24. B. Bhushan, Principles and Applications of Tribology, Wiley, New York, 1999, pp. 479–585.
25. G.W. Stachowiak, A.W. Batchelor, Engineering Tribology, Second ed., Butterworth Heinemann, Boston, 2001, pp. 533–52.
26. C. Navas, A. Conde, M. Cadenas and J. de Damborenea, Surf. Eng., 2006, vol 22, pp. 26–34.10.1179/174329406X84949 ↗
27. M.K. Stanford, V.K. Jain, Wear, 2001, vol.251, pp. 990–96.10.1016/S0043-1648(01)00719-0 ↗
28. J.-N. Aoh, J.-C. Chen, Wear, 2001, vol. 250, pp. 611–20.10.1016/S0043-1648(01)00668-8 ↗
29. M.F. Ashby, J. Abulawi, H.S. Kong, Tribol. Trans., 1991, vol.34 (4), pp. 577–87.10.1080/10402009108982074 ↗
30. B. Bhushan, Principles and Applications of Tribology, Wiley, New York, 1999, pp. 431–78.