journal article·2013-01

Microstructural Evolution During Friction Surfacing of Austenitic Stainless Steel AISI 304 on Low Carbon Steel

H. Khalid Rafi, N. Kishore Babu, G. Phanikumar, K. Prasad Rao

Publisher page

Abstract

Austenitic stainless steel AISI 304 coating was deposited over low carbon steel substrate by means of friction surfacing and the microstructural evolution was studied. The microstructural characterization of the coating was carried out by optical microscopy (OM), electron back scattered diffraction (EBSD), and transmission electron microscopy (TEM). The coating exhibited refined grains (average size of 5 μm) as compared to the coarse grains (average size of 40 μm) in as-received consumable rod. The results from the microstructural characterization studies show that discontinuous dynamic recrystallization (DDRX) is the responsible mechanism for grain evolution as a consequence of severe plastic deformation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Microstructure and mechanical properties · Metal and Thin Film Mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. V.I. Vitanov and I.I. Voutchkov: J. Mater. Process. Technol., 2005, vol. 159, pp. 27–32.10.1016/j.jmatprotec.2003.11.006 ↗
2. A.W. Batchelor, S. Jana, C.P. Koh, and C.S. Tan: J. Mater. Process. Technol., 1996, vol. 57, pp. 172–181.10.1016/0924-0136(95)02057-8 ↗
3. M. Chandrasekaran, A.W. Batchelor, and S. Jana. J. Mater. Process. Technol., 1997, vol. 72, pp. 446–452.10.1016/S0924-0136(97)00209-4 ↗
4. G.M. Reddy and T. Mohandas: Proceedings of the International Institute of Welding International Congress 2008, Chennai, India, 8–10 January 2008, pp. 1197–1213.
5. G.M. Bedford, V.I. Vitanov, and I.I. Voutchkov: Surf. Coat. Technol., 2001, vol. 141 pp. 34–39.10.1016/S0257-8972(01)01129-X ↗
6. T. Ishida: J. Mater. Sci., 1991, vol. 26, pp. 6431–6435.10.1007/BF02387825 ↗
7. V.I. Vitanov, I.I. Voutchkov, and G.M. Bedford: J. Mater. Process. Technol., 2000, vol. 107, pp. 236–242.10.1016/S0924-0136(00)00710-X ↗
8. D. Govardhan, A.C.S. Kumar, K.G.K. Murti, and G.M. Reddy: Mater. Des., 2012, vol. 36, pp. 206–214.10.1016/j.matdes.2011.07.040 ↗
9. H.K. Rafi, G.D.J. Ram, G. Phanikumar, and K.P. Rao: World Congress on Engineering (WCE-2010), London, U.K., 30 June–2 July 2010.
10. R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, M.E. Kassner, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett. Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–274.10.1016/S0921-5093(97)00424-3 ↗
11. A. Belyakov, K. Tsuzaki, H. Miura, and T. Sakai: Acta Mater., 2003, vol. 51, pp. 847–861.10.1016/S1359-6454(02)00476-7 ↗
12. C.I. Chang, C.J. Lee, and J.C. Huang: Scripta Mater., 2004, vol. 51, pp. 509–514.10.1016/j.scriptamat.2004.05.043 ↗
13. H.K. Rafi, G. Phanikumar, and K.P. Rao: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 937–939.10.1007/s11661-011-0614-2 ↗
14. F.J. Humphery and M. Hatherly: Recrystallization and Related Annealing Phenomena. Elsevier Sciences Ltd., Oxford, U.K., 1996.
15. H. Beladi, G.L. Kelly, and P.D. Hodgson: Int. Mater. Rev., 2007, vol. 52, pp. 14–28.10.1179/174328006X102538 ↗
16. H.B. Mcshane and T. Sheppard: J. Mech. Work. Technol., 1984, vol. 9, pp. 147–160.10.1016/0378-3804(84)90002-0 ↗
17. A. Dehghan-Manshadi and P.D. Hodgson: ISIJ Int., 2007, vol. 47(12), pp. 1799–1803.10.2355/isijinternational.47.1799 ↗
18. J.A. DeAlmeida and B. Barbosa: ISIJ Int., 2005, vol. 45, pp. 296–298.10.2355/isijinternational.45.296 ↗
19. D. Ponge and G. Gottstein: Acta Mater., 1998, vol. 46(1), pp. 69–80.10.1016/S1359-6454(97)00233-4 ↗
20. H. Beladi, P. Cizek, and P.D. Hodgson: Scripta Mater., 2010, vol. 62, pp. 191–196.10.1016/j.scriptamat.2009.10.022 ↗