Glass-Forming Ability and Competitive Crystalline Phases for Lightweight Ti-Be–Based Alloys
Source abstract
Abstract
The glass-forming ability (GFA) for the Ti-Be–based alloys in the Ti-Be-Zr ternary system is systematically studied. It was found that the best GFA obtained at a composition of Ti41Be34Zr25 (at. pct) in the Ti-Be-Zr ternary system, and the bulk-metallic-glass (BMG) rod samples with a diameter of 5 mm were fabricated by Cu-mold casting. The competitive crystalline phases around the composition of the best GFA materials were determined by scanning electron microscopy (SEM) and X-ray diffractometry (XRD). The GFA of the ternary alloys was further improved by an addition of 4 at. pct vanadium (V). The largest supercooled liquid region, ΔT x (ΔT x = T x − T g , T g is the glass-transition temperature, and T x the crystallization temperature), in the ternary alloy system reaches about 110 K (110 °C) for the Ti35Be32Zr33 alloy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallic Glasses and Amorphous Alloys · High Entropy Alloys Studies · Phase-change materials and chalcogenides
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. A. Peker and W.L. Johnson: Appl. Phys. Lett., 1993, vol. 63, pp. 2342–44.10.1063/1.110520 ↗
2. F.Q. Guo, H.J. Wang, S.J. Poon, and G.J. Shiflet: Appl. Phys. Lett., 2005, vol. 86, p. 091907(1–3).
3. H. Tan, Y. Zhang, D. Ma, Y.P. Feng, and Y. Li: Acta Mater., 2003, vol. 51, pp. 4551–61.10.1016/S1359-6454(03)00291-X ↗
4. Y. Zhang, W. Xu, H. Tan, and Y. Li: Acta Mater., 2005, vol. 53, pp. 2607–16.10.1016/j.actamat.2005.02.020 ↗
5. G.J. Hao, Y. Zhang, J.P. Lin, Y.L. Wang, Z. Lin, and G.L. Chen: Mater. Lett., 2006, vol. 60, pp. 1256–60.10.1016/j.matlet.2005.11.011 ↗
6. Y. Zhang, Y. Li, H. Tan, G.L. Chen, and H.A. Davies: J. Non-Cryst. Solids, 2006, vol. 352, pp. 5482–86.10.1016/j.jnoncrysol.2006.09.027 ↗
7. C.L. Ma, S. Ishihara, H. Soejima, N. Nishiyama, and A. Inoue: Mater. Trans., 2004, vol. 45, pp. 1802–06.10.2320/matertrans.45.1802 ↗
8. H. Men, S.J. Pang, A. Inoue, and T. Zhang: Mater. Trans., 2005, vol. 46, pp. 2218–20.10.2320/matertrans.46.2218 ↗
9. J.J. Oak, D.V. Louzguine-Luzgin, and A. Inoue: J. Mater. Res., 2007, vol. 22, pp. 1346–53.10.1557/jmr.2007.0154 ↗
10. W.H. Peter, P.K. Liaw, R.A. Buchanan, C.T. Liu, C.R. Brooks, I.A. Horton, C.A. Carmichael, and I.L. Wright: Intermetallics, 2002, vol. 10 (11–12), pp. 1125–29.10.1016/S0966-9795(02)00152-8 ↗
11. G.Y. Wang, P.K. Liaw, W.H. Peter, B. Yang, Y. Yokoyama, M.L. Benson, B.A. Green, M.J. Kirkham, S.A. White, T.A. Saleh, R.L. McDaniels, R.V. Steward, C.T. Liu, and C.R. Brooks: Intermetallics, 2004, vol. 12 (7–9), pp. 885–92.10.1016/j.intermet.2004.02.043 ↗
12. W.H. Peter, R.A. Buchanan, C.T. Liu, P.K. Liaw, M.L. Morrison, I.A. Horton, C.A. Carmichael, and J.L. Wright: Intermetallics, 2002, vol. 10 (11–12), pp. 1157–62.10.1016/S0966-9795(02)00130-9 ↗
13. B. Yang, P.K. Liaw, G. Wang, M. Morrison, C.T. Liu, R.A. Buchanan, and Y. Yokoyama: Intermetallics, 2004, vol. 12 (10–11), pp. 1265–74.10.1016/j.intermet.2004.04.006 ↗
14. H.Q. Li, C. Fan, K.X. Tao, H. Choo, and P.K. Liaw: Adv. Mater., 2006, vol. 18 (6), pp. 752–54.10.1002/adma.200501990 ↗
15. W.H. Jiang, G.J. Fan, F.X. Liu, G.Y Wang, H. Choo, and P.K. Liaw: J. Mater. Res., 2006, vol. 21 (9), pp. 2164–67.10.1557/jmr.2006.0266 ↗
16. C. Fan, H.Q. Li, L.I. Kecskes, K.X. Tao, H. Choo, P.K. Liaw, and C.T. Liu: Phys. Rev. Lett., 2006, vol. 96 (14), pp. 145506–09.10.1103/PhysRevLett.96.145506 ↗
17. B. Yang, C.T. Liu, T.G. Nieh, M.L. Morrison, P.K. Liaw, and R.A. Buchanan: J. Mater. Res., 2006, vol. 21 (4), pp. 915–22.10.1557/jmr.2006.0124 ↗
18. G. Chen, H. Bei, Y. Cao, A. Gali, C.T. Liu, and E.P. George: Appl. Phys. Lett., 2009, vol. 95, p. 081908(1–3).
19. G.Y. Sun, G. Chen, and G.L. Chen, Intermetallics, 2007, vol. 15 (5–6), pp. 632–34.10.1016/j.intermet.2006.10.026 ↗
20. L.E. Tanner and R. Ray: Scripta Metall., 1977, vol. 11, pp. 783–89.10.1016/0036-9748(77)90076-X ↗
21. R. Hasegawa and L.E. Tanner: Phys. Rev. B, 1977, vol. 16, pp. 3925–28.10.1103/PhysRevB.16.3925 ↗
22. L.E. Tanner and R. Ray: Acta Metall., 1979, vol. 27, pp. 1727–47.10.1016/0001-6160(79)90087-7 ↗
23. L.E. Tanner and R. Ray: Scripta Metall., 1977, vol. 11 (9), pp. 783–89.10.1016/0036-9748(77)90076-X ↗
24. A. Wiest, G. Duan, M.D. Demetriou, L.A. Wiest, A. Peck, G. Kaltenboeck, B. Wiest, and W.L. Johnson: Acta Mater., 2008, vol. 56, pp. 2625–30.10.1016/j.actamat.2008.02.001 ↗
25. G. Duan, A. Wiest, M.L. Lind, A. Kahl, and W.L. Johnson: Scripta Mater., 2008, vol. 58, pp. 465–68.10.1016/j.scriptamat.2007.10.040 ↗
26. D.C. Hoffmann, J. Suh, A. Wiest, M. Lind, M.D. Demetriou, and W.L. Johnson: PNAS, 2008, vol. 105 (51), pp. 20136–40.10.1073/pnas.0809000106 ↗
27. Z.P. Lu, J. Shen, D.W. Xing, J.F. Sun, and C.T. Liu: Appl. Phys. Lett., 2006, vol. 89, p. 071910(1–3).
28. Y. Zhang, Y.F. Ji, D.Q. Zhao, Y.X. Zhuang, R.J. Wang, M.X. Pan, Y.D. Dong, and W.H. Wang: Scripta Mater., 2001, vol. 44, pp. 1107–12.10.1016/S1359-6462(00)00707-7 ↗
29. Y. Zhang, Y.J. Zhou, J.P. Lin, G.L. Chen, and P.K. Liaw: Adv. Eng. Mater., 2008, vol. 10 (6), pp. 534–38.10.1002/adem.200700240 ↗
30. A. Inoue and A. Takeuchi: Mater. Trans., 2002, vol. 43, pp. 1892–1906.10.2320/matertrans.43.1892 ↗
31. Y. Zhang, Y.J. Zhou, X.D. Hui, M.L. Wang, and G.L. Chen: Sci. China, Ser. G, 2008, vol. 51 (4), pp. 427–37.10.1007/s11433-008-0050-5 ↗
32. Y. Zhang, J. Chen, G.L. Chen, and X.J. Liu: Appl. Phys. Lett., 2006, vol. 89, p. 131904(1–3).
33. Y. Zhang, M.X. Pan, D.Q. Zhao, R.J. Wang, and W.H. Wang: Mater. Trans. JIM, 2000, vol. 41 (11), pp. 1410–14.10.2320/matertrans1989.41.1410 ↗
34. W.Z. Liang, J. Shen, and J.F. Sun: J. Alloys Compd., 2006, vol. 420 (1–2), pp. 94–97.10.1016/j.jallcom.2005.10.018 ↗
35. X.D. Hui, W. Dong, G.L. Chen, and K.F. Yao: Acta Mater., 2007, vol. 55, pp. 907–20.10.1016/j.actamat.2006.09.012 ↗
36. Y.K. Xu, H. Ma, J. Xu, and E. Ma: Acta Mater., 2005, vol. 53, pp. 1857–66.10.1016/j.actamat.2004.12.036 ↗