Microstructure–Mechanical Properties–Wear Resistance Relationship of SiAlON Ceramics
Source abstract
Abstract
In designing wear-resistant ceramics, it is important to understand the influence of the microstructure and material properties on friction and wear behavior. In addressing such issues, a series of fretting-wear tests was carried out on an important nonoxide engineering ceramic, i.e., SiAlON ceramics, densified using both pressureless and gas-pressure sintering routes. Under the selected operating conditions with a commercial SiAlON ball as a counterbody, tribomechanical wear assisted by deep abrasive grooves, plowing, grain pullout, and microcracking was observed as the major wear mechanism. In addition, the formation of a discontinuous silica-rich tribochemical layer on the worn surface was also observed. Although the steady-state coefficient of friction (COF) varies in a narrow window of 0.59 to 0.64, the wear rate of the investigated SiAlON ceramics lies in the range 7.3 × 10−6 to 8.4 × 10−5 mm3/N·m. An attempt has been made to correlate wear loss with hardness and indentation toughness. Concerning the influence of the microstructure, the wear rate is found to have an inverse linear correlation with the β-SiAlON content. Another important observation has been that the wear rate has an inverse linear relationship with the substitution parameter (z).
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. F.L. Riley: J. Am. Ceram. Soc., 2000, vol. 83, pp. 245–65.10.1111/j.1151-2916.2000.tb01182.x ↗
2. S. Kurama, M. Herrmann, and H. Mandal: J. Eur. Ceram. Soc., 2003, vol. 22, pp. 109–19.10.1016/S0955-2219(01)00237-0 ↗
3. M. Zenotchkine, R. Shuba, J.S. Kim, and I. W. Chen: J. Am. Ceram. Soc., 2002, vol. 85 (5), pp. 1254–59.10.1111/j.1151-2916.2002.tb00254.x ↗
4. M. Zenotchkine, R. Shuba, and I.W. Chen: J. Am. Ceram. Soc., 2003, vol. 86, pp. 1168–75.10.1111/j.1151-2916.2003.tb03443.x ↗
5. H. Mandal: J. Eur. Ceram. Soc., 1999, vol. 19, pp. 2349–50.10.1016/S0955-2219(99)00111-9 ↗
6. B. Basu, Manisha, and N.K. Mukhopadhyay: J. Eur. Ceram. Soc., 2009, vol. 29, pp. 801–11.10.1016/j.jeurceramsoc.2008.07.005 ↗
7. Manisha and B. Basu: J. Am. Ceram. Soc., 2007, 90 (6), pp. 1858–65.10.1111/j.1551-2916.2007.01700.x ↗
8. B. Basu, M. Lewis, M.E. Smith, M. Bunyard, and T. Kemp: J. Eur. Ceram. Soc., 2006, vol. 26, pp. 3919–24.10.1016/j.jeurceramsoc.2006.01.004 ↗
9. J. Mark I., H. Kiyoshi, H. Hideki, Y. Yukihiko, and K. Shuzo: J. Eur. Ceram. Soc., 2003, vol. 23, pp. 1743–50.
10. P. Reis, P. Davim J., X. Xu, and J.M.F. Ferreira: Tribol. Lett., 2005, 18 (3), pp. 295–301.10.1007/s11249-004-2756-5 ↗
11. P. Reis, V. Filho, P. Davim J., X. Xu, and J.M.F. Ferreira: Mater. Des., 2005, vol. 26, pp. 417–23.10.1016/j.matdes.2004.07.003 ↗
12. M.I. Jones, H. Hyugab, K. Hirao, and Y. Yamauchi: J. Eur. Ceram. Soc., 2004, vol. 24, pp. 3581–89.10.1016/j.jeurceramsoc.2003.11.022 ↗
13. M.I. Jones, K. Hirao, H. Hyuga, Y. Yamauchi, Z. Shen, and M. Nygren: Wear, 2004, vol. 257, pp. 292–96.10.1016/j.wear.2003.12.006 ↗
14. X. Zhao, J. Liu, B. Zhu, H. Miao, and Z. Luo: Ceram. Int., 1999, vol. 25, pp. 309–15.10.1016/S0272-8842(98)00048-0 ↗
15. M. Nakamura, K. Hirao, Y. Yukihiko, and S. Kanzaki: Wear, 2003, vol. 254, pp. 94–102.10.1016/S0043-1648(02)00293-4 ↗
16. Z.H. Xie, M. Hoffman, R.J. Moon, P.R. Munroe, and Y.B. Cheng: Wear, 2006, vol. 260, pp. 387–400.10.1016/j.wear.2005.02.065 ↗
17. B. Basu, J. Vleugels, M. Kalin, and O. Van Der Biest: Mater. Sci. Eng., 2003, vol. A359, pp. 228–36.10.1016/S0921-5093(03)00349-6 ↗
18. H. Mandal, F. Kara, S. Turan, and A. Kara: U.S. Patent Publication No. WO/2002/070419, 2002.
19. H. Mandal: PhD. Thesis, University of Newcastle Upon Tyne, UK, 1992.
20. S. Kushan Akin: Doctoral Thesis, Anadolu University, Turkey, 2006.
21. M. Varenberg, I. Etsion, and G. Halperin: Tribol. Lett., 2004, vol. 17, pp. 569–73.10.1023/B:TRIL.0000044506.98760.f9 ↗
22. S. Venkatachalam and S.Y. Liang: J. Manuf. Sci. Eng., 2007, vol. 129 (2), pp. 274–80.10.1115/1.2673449 ↗
23. B. Bhushan: Principles and Applications of Tribology, John Wiley & Sons, Inc., New York, NY, 1999, pp. 201–02.
24. J.F. Archard: Wear, 1958, vol. 2 (6), pp. 438–55.10.1016/0043-1648(59)90159-0 ↗
25. B.V. Manoj Kumar, B. Basu, M. Kalin, and J. Vizintin: J. Mater. Res., 2008, vol. 23 (5), pp. 1214–27.10.1557/jmr.2008.0165 ↗
26. B.V. Manoj Kumar, B. Basu, M. Kalin, and J. Vizintin: J. Am. Ceram. Soc., 2007, 90 (5), pp. 1534–40.10.1111/j.1551-2916.2007.01630.x ↗
27. Y.G. Ko, D.H. Shin, K.T. Park, and C.S. Lee: Scripta Mater., 2006, vol. 54, pp. 1785–89.10.1016/j.scriptamat.2006.01.034 ↗
28. D. Guha and S.K. Chowdhuri: Wear, 1996, vol. 197, pp. 63–73.10.1016/0043-1648(95)06833-3 ↗
29. M. Kalin and J. Vizintin: Wear, 2001, vol. 249, pp. 172–81.10.1016/S0043-1648(01)00549-X ↗
30. Z.R. Zhou, E. Sauger, J.J. Liu, and L. Vincent: Wear, 1997, vol. 212, pp. 50–58.10.1016/S0043-1648(97)00141-5 ↗
31. Outokumpu HSC Chemistry, version 5.1, Outokumpu Research Oy Information Service, Pori, Finland, 2002, www.outokumpu.com/hsc.
32. I. Barin, O. Knacke, and O. Kubaschewski: Thermodynamic Properties of Inorganic Substances, Springer-Verlag, Berlin, 1973, suppl. 1977.10.1007/978-3-662-02293-1 ↗
33. L. Xua, X. Zhang, F. Lian, Y. Di, H. Wang, M. Liu, T. Wang, and W. Li: Key Eng. Mater., 2008, vols. 368–372, pp. 1564–67.10.4028/www.scientific.net/KEM.368-372.1564 ↗
34. J.Y. Qiu, J. Tatami, C. Zhang, K. Komeya, T. Meguro, and Y.B. Cheng: J. Eur. Ceram. Soc., 2002, vol. 22, pp. 2989–96.10.1016/S0955-2219(02)00055-9 ↗
35. X.H. Du, Z.T. Sui, and G.R. Zhang: J. Inorg. Mater., 1998, vol. 13, pp. 463–68.
36. L.H. Xu, F. Lian, H. Zhang, Y.B. Bi, K. Cheng, and Y.B. Qian: Mater. Des., 2006, vol. 27, pp. 595–600.10.1016/j.matdes.2004.12.017 ↗