Mechanical Behavior of Ultrafine-Grained Ti-6Al-4V Alloy Produced by Severe Warm Rolling: The Influence of Starting Microstructure and Reduction Ratio
Source abstract
Abstract
To provide insight into the mechanical behavior and microstructural evolution of bulk ultrafine-grained (UFG) Ti-6Al-4V alloys, we produced Ti-6Al-4V alloy sheets with grain size smaller than 300 nm through severe warm rolling of three different starting microstructures (i.e., lamellar, equiaxed, and hybrid, that is half equiaxed plus half lamellar microstructures) with various reduction ratios (i.e., 60, 70, 80, and 90 pct) at 873 K (600 °C). Accordingly, the tensile behavior, microhardness, grain size, and dislocation density of the UFG Ti-6Al-4V alloys with different starting microstructures and reduction ratios were comparatively analyzed. Our results show that, following the continuous enhancement of tensile strength and hardness as the rolling reduction ratio increased from 0 to 70 pct, there was a saturation state in which the values of strength and hardness remained constant as the reduction ratio further increased from 70 to 90 pct for all the alloy samples with different starting microstructures. In terms of microstructural evolution, although grain size decreased and dislocation density increased continuously as the rolling reduction ratio increased from 0 to 70 pct, grain size and dislocation density did not change significantly when the reduction ratio further increased from 70 to 90 pct. Our results suggest that, whereas the starting microstructure influences the early stages of grain refinement and mechanical performance, this influence diminishes as the rolling reduction ratio is increased beyond a critical value. This behavior was rationalized on the basis of the limits of grain boundary and dislocation strengthening during severe warm rolling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Microstructure and mechanical properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (28)
Show source-provided references
1. G. Lütjering, J.C. Williams: Titanium, 2nd ed., Springer, Berlin, 2007.
2. Zherebtsov SV, Salishchev GA, Galeyev RM, Valiakhmetov OR, Mironov SY, Semiatin SL. Scr Mater, 2004, vol. 51, pp. 1147-51.10.1016/j.scriptamat.2004.08.018 ↗
3. Zhang Y, Sato YS, Kokawa H, Park SHC, Hirano S. Mater Sci Eng A, 2008, vol. 485, pp. 448-55.10.1016/j.msea.2007.08.051 ↗
4. Zherebtsov S, Salishchev G, Łojkowski W. Mater Sci Eng A, 2009, vol. 515, pp. 43-8.10.1016/j.msea.2009.03.005 ↗
5. Semenova IP, Raab GI, Golubovskiy ER, Valiev RR. J Mater Sci, 2013, vol. 48, pp. 4806-12.10.1007/s10853-013-7305-x ↗
6. Kim Y, Kim E-P, Song Y-B, Lee SH, Kwon Y-S. J Alloy Compd, 2014, vol. 603, pp. 207-12.10.1016/j.jallcom.2014.03.022 ↗
7. Sergueeva AV, Stolyarov VV, Valiev RZ, Mukherjee AK. Scr Mater, 2000, vol. 43, pp. 819-24.10.1016/S1359-6462(00)00496-6 ↗
8. Semenova IP, Raab GI, Saitova LR, Valiev RZ. Mater Sci Eng A, 2004, vol. 387–389, pp. 805-8.10.1016/j.msea.2004.02.093 ↗
9. Chao Q, Hodgson P, Beladi H. Metall Mater Trans A, 2014, vol. 45, pp. 2659-71.10.1007/s11661-014-2205-5 ↗
10. Murty SVSN, Nayan N, Kumar P, Narayanan PR, Sharma SC, George KM. Mater Sci Eng A, 2014, vol. 589, pp. 174-81.10.1016/j.msea.2013.09.087 ↗
11. Li Z, Fu L, Fu B, Shan A. Mater Sci Eng A, 2012, vol. 558, pp. 309-18.10.1016/j.msea.2012.08.005 ↗
12. Li Z, Fu L, Fu B, Yang X, Shan A. J Nanosci Nanotechno, 2014, vol. 14, pp. 7740-4.10.1166/jnn.2014.9405 ↗
13. Dragomir IC, Li DS, Castello-Branco GA, Garmestani H, Snyder RL, Ribarik G, et al. Mater Charact, 2005, vol. 55, pp. 66-74.10.1016/j.matchar.2005.03.002 ↗
14. Ribarik G, Ungar T, Gubicza J. J Appl Crystallogr, 2001, vol. 34, pp. 669-76.10.1107/S0021889801011451 ↗
15. Dragomir IC, Ungar T. J Appl Crystallogr, 2002, vol. 35, pp. 556-64.10.1107/S0021889802009536 ↗
16. Z. Li, B. Zheng, Y. Wang, T. Topping, Y. Zhou, R. Valiev, et al.: J Mater Sci, 2014, vol. pp. 6656–66.10.1007/s10853-014-8337-6 ↗
17. Ungár T. Mater Sci Eng A, 2001, vol. 309–310, pp. 14-22.10.1016/S0921-5093(00)01685-3 ↗
18. W.F. Smith, J. Hashemi: Foundations of Materials Science and Engineering, 4th ed., McGraw-Hill, New York, 2006.
19. Milner JL, Abu-Farha F, Bunget C, Kurfess T, Hammond VH. Mater Sci Eng A, 2013, vol. 561, pp. 109-17.10.1016/j.msea.2012.10.081 ↗
20. M.A. Krivoglaz: X-ray and Neutron Diffraction in Nonideal Crystals, Springer, Berlin, 1996.10.1007/978-3-642-74291-0 ↗
21. Dederichs PH. Phys Rev B, 1971, vol. 4, pp. 1041-50.10.1103/PhysRevB.4.1041 ↗
22. Bailey JE, Hirsch PB. Philos Mag, 1960, vol. 5, pp. 485-97.10.1080/14786436008238300 ↗
23. Li Z, Chen D, Wang H, Lavernia EJ, Shan A. J Mater Res, 2014, vol. 29, pp. 2514-24.10.1557/jmr.2014.280 ↗
24. Ding R, Guo ZX. Mater Sci Eng A, 2004, vol. 365, pp. 172-9.10.1016/j.msea.2003.09.024 ↗
25. Lee YT, Peters M, Welsch G. Metall Trans A, 1991, vol. 22, pp. 709-14.10.1007/BF02670293 ↗
26. Hall EO. Proc Phys Soc B, 1951, vol. 64, pp. 747-53.10.1088/0370-1301/64/9/303 ↗
27. Lin Y, Wen H, Li Y, Wen B, Liu W, Lavernia E. Metall Mater Trans B, 2014, vol. 45, pp. 795-810.10.1007/s11663-014-0049-4 ↗
28. Lin Y, Xu B, Feng Y, Lavernia EJ. J Alloy Compd, 2014, vol. 596, pp. 79-85.10.1016/j.jallcom.2014.01.189 ↗