journal article·2015-09Open access

Discontinuous Precipitation in Ni-Base Superalloys During Solution Heat Treatment

D. Welton, N. D’Souza, J. Kelleher, S. Gardner, Z. H. Dong, G. D. West, Hongbiao Dong

Abstract

Abstract Discontinuous precipitation in single-crystal Ni-base superalloys during solution heat treatment has been studied. It is found that discontinuous precipitation occurs at temperatures approaching the solvus, where volume diffusion is dominant. Diffusion of Al ahead of the boundary leads to gamma prime precipitation and is accompanied by a loss in the driving force available for advancement of the grain boundary. The rate of gamma prime precipitation was tracked usingin situneutron diffraction during isothermal hold. Gamma prime precipitation is accompanied by super-saturation of Cr and W within the channels ahead of the interface. The driving force calculated for the initial stages of DP was [10-5 to 10-4] N/[μm2of the grain boundary]. The results provide an insight into discontinuous precipitation during solution heat treatment of Ni-base single-crystal alloys and are useful in optimizing the heat treatment process to avoid surface defect formation.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Advanced Materials Characterization Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. R. C. Reed, The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, UK, 2006.10.1017/CBO9780511541285 ↗
2. I. Manna, S. K. Pabi, W. Gust, Int. Mater. Rev., 2001, Vol. 46, pp. 53–91.10.1179/095066001101528402 ↗
3. W.S. Walston, J.C. Schaeffer, and W.H. Murphy: in Superalloys, R.D. Kissinger et al., eds., The Minerals, Met. Mater. Soc., TMS Warrendale, 1996, pp. 9–18.10.7449/1996/Superalloys_1996_9_18 ↗
4. A. Suzuki, C.M.F. Rae, M. Yoshida, Y. Matsubara, and H. Murakami: in Superalloys 2008, R.C. Reed et al., eds., TMS, Warrendale, 2008, pp. 777–86.10.7449/2008/Superalloys_2008_777_786 ↗
5. C. M. F. Rae, M. S. Hook, R. C. Reed, Mat. Sci. Eng. A, 2005, Vol. 396, pp. 231–239.10.1016/j.msea.2005.01.005 ↗
6. J. D. Nystrom, T. M. Pollock, W. H. Murphy, A. Garg, Met. Mater. Trans. A, 1997, Vol. 28A, pp. 2443–2452.10.1007/s11661-997-0001-1 ↗
7. A. Heckl, S. Neumeier, S. Cenanovic, M. Goken, R. F. Singer, Acta Mater., 2011, Vol. 59, pp. 6563–6573.10.1016/j.actamat.2011.07.002 ↗
8. A. Heckl, S. Cenanovic, M. Goken, R. F. Singer, Mater. Trans. A., 2012, Vol. 43A, pp. 10–19.10.1007/s11661-011-0833-6 ↗
9. G. Xie, J. Zhang, L. H. Lou, Scr. Met., 2008, Vol. 59, pp. 858–861.10.1016/j.scriptamat.2008.06.032 ↗
10. J. M. Oblak, W. A. Owczarski, Trans. Met. Soc. AIME, 1968, Vol. 242, pp. 1563–1568.
11. J. Meng, T. Jin, X-F. Sun, Z. Hu (2011). Int. J. Min Met. Mater.18: 197-202.10.1007/s12613-011-0422-0 ↗
12. A. Porter, B. Ralph, J. Mater. Sci., 1981, Vol. 16, pp. 707–713.10.1007/BF02402788 ↗
13. R. Burgel, P.D. Portella, and J. Preuhs: in Superalloys 2000, T.M. Pollock et al., eds.,TMS (Min. Met. Mater. Soc.), Pittsburgh, PA, pp. 229–38.10.7449/2000/Superalloys_2000_229_238 ↗
14. M. Dahlen, L. Winberg, Acta Metall., 1980, Vol. 28, pp. 41–50.10.1016/0001-6160(80)90039-5 ↗
15. M. Hillert in: R. B. Nicholson, J. W. Christian, G. W. Greenwood, J. Nutting and R. D. Smallman (Eds), The Mechanisms of Phase Transformations in Crystalline Solids, Proc. of International Symposium., Monograph and Report Series No. 33, Inst. Of Metals, Manchester, July 1968, pp. 231–47.
16. M. Hillert, Metall. Trans., 1972, Vol. 3, pp. 2729–41.10.1007/BF02652840 ↗
17. M. Kajihara, W. Gust, Scripta Mater. 38 (1994) 1621–1627.10.1016/S1359-6462(98)00095-5 ↗
18. H. B. Dong, J. D. Hunt, J. Thermal. Anal. Calorim., 2001, Vol. 64, pp. 167–176.10.1023/A:1011589013639 ↗
19. C. Schulze, M. Feller-Kniepmeier, Mater. Sci. Eng. A, 2000, Vol. A281, pp. 204–212.10.1016/S0921-5093(99)00713-3 ↗
20. N. D’Souza, R. Beanland, C.L. Hayward, H.B. Dong, Acta Mater., 2011, Vol. 59, pp. 1003–1013.10.1016/j.actamat.2010.10.031 ↗
21. H. J. Stone, M. J. Peet, H. K. D. H. Bhadeshia, P. J. Withers, S. S. Babu, E. D. Specht, Proc. Roy. Soc., 2008, Vol. 464, pp. 1009–1027.10.1098/rspa.2007.0201 ↗
22. C. B. Alcock, V. B. Itken, M. K. Horrigan, Can. Met. Quart., 1984, Vol. 23, pp. 309–313.10.1179/cmq.1984.23.3.309 ↗
23. N. D’Souza, D. Welton, G. D. West, I. M. Edmonds, H. Wang, Metall. Trans. A, 2015, Vol. 45, pp. 5968–5981.10.1007/s11661-014-2554-0 ↗
24. D. Liu, W. A. Miller, K. T. Aust, Metall. Trans. A., 1988, Vol. 19A, pp. 1667–1675.10.1007/BF02645134 ↗
25. H-C. Yu, A. Van der Ven, K. Thornton, Metall. Mater. Trans. A, 2012, Vol. 43A, pp. 3481–3500.10.1007/s11661-012-1299-x ↗
26. F. S. Petit, Trans. Met. Soc. AIME, 1967, Vol. 239, pp. 1296–1305.
27. L. Bencze, D. D. Raj, D. Kath, W. A. Oates, L. Singheiser, K. Hilpert, Met. Mat. Trans. B, Vol. 35B, 2004, pp. 867–876.10.1007/s11663-004-0081-x ↗
28. JMatPro: Ni module (Version 2.0), Sente Software, Guilford, UK (2002).
29. M. D. Sangid, H. Sehitoglu, H. J. Maier, T. Niendorf, Mat. Sci. Eng. A, 2010, Vol. 527, pp. 7115–7125.10.1016/j.msea.2010.07.062 ↗
30. R. Darolia, D.F. Lahrman, and R.D. Field: in Superalloys, S. Reichman et al., eds., The Minerals, Met. and Mater. Soc., TMS Warrendale, PA, 1988, pp. 255–64.10.7449/1988/Superalloys_1988_255_264 ↗
31. C. M. F. Rae, R. C. Reed, Acta Mater., 2001, Vol. 49, pp. 4113–4125.10.1016/S1359-6454(01)00265-8 ↗
32. H. Wang, N. D’Souza, S. Zhao. D. Welton, N. Warnken, R.C. Reed, Scripta Mater., 2014, Vol. 78-79, pp. 45–48.10.1016/j.scriptamat.2014.01.031 ↗