journal article·2020-04Open access

On the Precipitation-Strengthening Contribution of the Ta-Containing Co3(Al,W)-Phase to the Creep Properties of γ/γ′ Cobalt-Base Superalloys

A. Bezold, N. Volz, F. Xue, C. H. Zenk, S. Neumeier, M. Göken

Abstract

Abstract The creep strength of single-crystalline Co-based superalloys was found to be comparable to first-generation Ni-base superalloys. However, considerable shearing of the γ′ precipitates was observed in the early creep stages. To determine the strengthening contribution of the Ta-containing γ′-Co3(Al,W) precipitates, the creep strength of several single-crystalline Co-Al-W-Ta superalloys was determined as a function of the γ′ volume fraction at 1223 K (950 °C) and stress levels between 25 and 600 MPa. Employing a Lagneborg–Bergman–Reppich (LBR) approach, it is found that the strengthening contribution of the γ′ precipitates increases significantly with increasing γ′ volume fraction. In a Co-base superalloy that exhibits a precipitate volume fraction of about 70 pct, the γ′-strengthening contribution calculated with the LBR approach ranges between the ones observed in first-generation Ni-base superalloy CMSX-6 and second-generation Ni-base superalloy CMSX-4.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (44)

Show source-provided references
1. 1 J. Sato, T. Omori, K. Oikawa, I. Ohnuma, R. Kainuma, and K. Ishida: Science, 2006, vol. 312, pp. 90–1.10.1126/science.1121738 ↗
2. 2 S. Meher, H.-Y. Yan, S. Nag, D. Dye, and R. Banerjee: Scr. Mater., 2012, vol. 67, pp. 850–3.10.1016/j.scriptamat.2012.08.006 ↗
3. 3 T. Omori, K. Oikawa, J. Sato, I. Ohnuma, U.R. Kattner, R. Kainuma, and K. Ishida: Intermetallics, 2013, vol. 32, pp. 274–83.10.1016/j.intermet.2012.07.033 ↗
4. 4 I. Povstugar, P.-P. Choi, S. Neumeier, A. Bauer, C.H. Zenk, M. Göken, and D. Raabe: Acta Mater., 2014, vol. 78, pp. 78–85.10.1016/j.actamat.2014.06.020 ↗
5. 5 A. Suzuki and T.M. Pollock: Acta Mater., 2008, vol. 56, pp. 1288–97.10.1016/j.actamat.2007.11.014 ↗
6. 6 A. Bauer, S. Neumeier, F. Pyczak, and M. Göken: Scr. Mater., 2010, vol. 63, pp. 1197–200.10.1016/j.scriptamat.2010.08.036 ↗
7. F. Xue, M. Wang, and Q. Feng: in Superalloys 2012, Huron, E.S., Reed, R.C., Hardy, M.C., Mills, M.J., Montero, R.E., Portella, P.D., and Telesman, J., eds., TMS, Warrendale, 2012, pp. 813–21.10.1002/9781118516430.ch90 ↗
8. 8 A. Mottura, A. Janotti, and T.M. Pollock: Intermetallics, 2012, vol. 28, pp. 138–43.10.1016/j.intermet.2012.04.020 ↗
9. M.S. Titus, A. Mottura, G. BabuViswanathan, A. Suzuki, M.J. Mills, and T.M. Pollock: Acta Mater., 2015, vol. 89, pp. 423–37.10.1016/j.actamat.2015.01.050 ↗
10. M.S. Titus, A. Suzuki, and T.M. Pollock: in Superalloys 2012, Huron, E.S., Reed, R.C., Hardy, M.C., Mills, M.J., Montero, R.E., Portella, P.D., and Telesman, J., eds., TMS, Warrendale, 2012, pp. 823–32.
11. 11 A. Bauer, S. Neumeier, F. Pyczak, R.F. Singer, and M. Göken: Mater. Sci. Eng. A, 2012, vol. 550, pp. 333–41.10.1016/j.msea.2012.04.083 ↗
12. 12 A. Suzuki, G.C. DeNolf, and T.M. Pollock: Scr. Mater., 2007, vol. 56, pp. 385–8.10.1016/j.scriptamat.2006.10.039 ↗
13. 13 K. Tanaka, M. Ooshima, N. Tsuno, A. Sato, and H. Inui: Philos. Mag., 2012, vol. 92, pp. 4011–27.10.1080/14786435.2012.700416 ↗
14. 14 F. Xue, H.J. Zhou, Q.Y. Shi, X.H. Chen, H. Chang, M.L. Wang, and Q. Feng: Scr. Mater., 2015, vol. 97, pp. 37–40.10.1016/j.scriptamat.2014.10.015 ↗
15. 15 M.S. Titus, Y.M. Eggeler, A. Suzuki, and T.M. Pollock: Acta Mater., 2015, vol. 82, pp. 530–9.10.1016/j.actamat.2014.08.033 ↗
16. 16 F. Xue, C.H. Zenk, L.P. Freund, M. Hoelzel, S. Neumeier, and M. Göken: Scr. Mater., 2018, vol. 142, pp. 129–32.10.1016/j.scriptamat.2017.08.039 ↗
17. 17 M. Lenz, Y.M. Eggeler, J. Müller, C.H. Zenk, N. Volz, P. Wollgramm, G. Eggeler, S. Neumeier, M. Göken, and E. Spiecker: Acta Mater., 2019, vol. 166, pp. 597–610.10.1016/j.actamat.2018.12.053 ↗
18. 18 T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1992, vol. 40, pp. 1–30.10.1016/0956-7151(92)90195-K ↗
19. 19 N. Matan, D.C. Cox, P. Carter, M.A. Rist, C.M.F. Rae, and R.C. Reed: Acta Mater., 1999, vol. 47, pp. 1549–63.10.1016/S1359-6454(99)00029-4 ↗
20. 20 M. Feller-Kniepmeier and T. Link: Metall. Trans. A, 1989, vol. 20, pp. 1233–8.10.1007/BF02647405 ↗
21. 21 R. Lagneborg and B. Bergman: Met. Sci., 1976, vol. 10, pp. 20–8.10.1179/030634576790431462 ↗
22. 22 B. Reppich, M. Heilmaier, K. Liebig, G. Schumann, K.-D. Stein, and T. Woller: Steel Res., 1990, vol. 61, pp. 251–7.10.1002/srin.199000343 ↗
23. 23 R. Lagneborg: J. Mater. Sci., 1968, vol. 3, pp. 596–602.10.1007/BF00757905 ↗
24. 24 P.W. Davies, G. Nelmes, K.R. Williams, and B. Wilshire: Met. Sci. J., 1973, vol. 7, pp. 87–92.10.1179/030634573790445659 ↗
25. 25 O.D. Sherby and P.M. Burke: Prog. Mater. Sci., 1968, vol. 13, pp. 323–90.10.1016/0079-6425(68)90024-8 ↗
26. 26 R. Lagneborg: Scr. Metall., 1973, vol. 7, pp. 605–13.10.1016/0036-9748(73)90222-6 ↗
27. 27 W. Blum and B. Reppich: Acta Metall., 1969, vol. 17, pp. 959–66.10.1016/0001-6160(69)90040-6 ↗
28. 28 A. Heckl, R. Rettig, and R.F. Singer: Metall. Mater. Trans. A, 2010, vol. 41, pp. 202–11.10.1007/s11661-009-0076-y ↗
29. 29 R. Bürgel, H.J. Maier, and T. Niendorf: Handbuch Hochtemperatur-Werkstofftechnik, 4th edn., Vieweg+Teubner Verlag, Wiesbaden, 2011.10.1007/978-3-8348-9907-1 ↗
30. 30 R.C. Reed, N. Matan, D.C. Cox, M.A. Rist, and C.M.F. Rae: Acta Mater., 1999, vol. 47, pp. 3367–81.10.1016/S1359-6454(99)00217-7 ↗
31. W. Schneider: Dr.-Ing. Dissertation, University of Erlangen–Nuremberg, 1993.
32. W. Schneider, J. Hammer, and Mughrabi, H.: in Superalloys 1992, Antolovich, S.D., MacKay, R.A., Anton, D.L., Khan, T., Kissinger, R.D., and Klarstrom, D.L., eds., TMS, Warrendale, 1992, pp. 589–98.
33. 33 F. Wilhelm, E. Affeldt, E. Fleischmann, U. Glatzel, and J. Hammer: Int. J. Fatigue, 2017, vol. 97, pp. 1–8.10.1016/j.ijfatigue.2016.12.003 ↗
34. E. Fleischmann: Dr.-Ing. Dissertation, University of Bayreuth, 2013.
35. 35 K. Kakehi: Scr. Mater., 1999, vol. 41, pp. 461–5.10.1016/S1359-6462(99)00191-8 ↗
36. 36 D.M. Knowles and S. Gunturi: Mater. Sci. Eng. A, 2002, vol. 328, pp. 223–37.10.1016/S0921-5093(01)01688-4 ↗
37. N. Tsuno, S. Shimabayashi, K. Kakehi, C.M.F. Rae, and R.C. Reed: in Superalloys 2008, TMS, Warrendale, 2008, pp. 433–42.
38. 38 P. Lukáš, J. Čadek, V. Šustek, and L. Kunz: Mater. Sci. Eng. A, 1996, vol. 208, pp. 149–57.10.1016/0921-5093(95)10052-0 ↗
39. 39 Z. Zhu, H. Basoalto, N. Warnken, and R.C. Reed: Acta Mater., 2012, vol. 60, pp. 4888–900.10.1016/j.actamat.2012.05.023 ↗
40. 40 M.S.A. Karunaratne, P. Carter, and R.C. Reed: Mater. Sci. Eng. A, 2000, vol. 281, pp. 229–33.10.1016/S0921-5093(99)00705-4 ↗
41. 41 S.B. Jung, T. Yamane, Y. Minamino, K. Hirao, H. Araki, and S. Saji: J. Mater. Sci. Lett., 1992, vol. 11, pp. 1333–7.10.1007/BF00729354 ↗
42. 42 M.S.A. Karunaratne and R.C. Reed: Defect Diffus. Forum, 2005, vol. 237–240, pp. 420–5.10.4028/www.scientific.net/DDF.237-240.420 ↗
43. 43 K. Monma, H. Suto, and H. Oikawa: J. Jpn. Inst. Met., 1964, vol. 28, pp. 188–92.10.2320/jinstmet1952.28.4_188 ↗
44. 44 M.S.A. Karunaratne, P. Carter, and R.C. Reed: Acta Mater., 2001, vol. 49, pp. 861–75.10.1016/S1359-6454(00)00390-6 ↗