3D Time-Resolved Observations of Fatigue Crack Initiation and Growth from Corrosion Pits in Al 7XXX Alloys Using In Situ Synchrotron X-ray Tomography
Source abstract
Abstract
In situ three-dimensional X-ray synchrotron tomography was used to visualize and quantify the fatigue crack initiation and growth from corrosion pits in high strength aluminum alloys. Corrosion pitted Al 7075 and Al 7475 samples of peak-aged, over-aged, and highly over-aged conditions were prepared by soaking in 3.5 wt pct NaCl solution for fifteen days. These samples were fatigue tested in situ in 3.5 wt pct NaCl solution using synchrotron X-ray tomography to analyze the fatigue crack initiation and growth characteristics (4D). Increases in maximum pit depth and fatigue crack growth rate variability were found with increased aging. A detailed analysis of crack morphology and deflection, as a function of aging, was carried out and it discussed.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Non-Destructive Testing Techniques · Fatigue and fracture mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (73)
Show source-provided references
1. E.A. Starke, T.J. Staley: Prog. Aeronaut. Sci., 1996, vol. 32, pp. 131–172.10.1016/0376-0421(95)00004-6 ↗
2. S. Dey, S.K. Das, A. Basumallick, I. Chattoraj: Metall. Mater. Trans. A., 2010, vol. 41A, pp. 3297–3307.10.1007/s11661-010-0395-z ↗
3. P.S. Pao, S.J. Gill, C.R. Feng: Scripta Mater., 2000, vol. 43, pp. 391–96.10.1016/S1359-6462(00)00434-6 ↗
4. P.S. Pao, C.R. Feng, S.J. Gill: Corros. Sci., 2000, vol. 56, pp. 1022-31.10.5006/1.3294379 ↗
5. T.D. Burleigh: Corros. Sci., 1991, vol. 47, pp. 89-98.10.5006/1.3585235 ↗
6. N.J.H. Holroyd, G.M. Scamans: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 1230–53.10.1007/s11661-012-1528-3 ↗
7. S.J. Findlay, N.D. Harrison: Mater. Today, 2002, vol. 5, pp. 18-25.10.1016/S1369-7021(02)01138-0 ↗
8. L. Molent: Int. J. Fatigue, 2010, vol. 32, pp. 639-49.10.1016/j.ijfatigue.2009.09.002 ↗
9. S.A. Barter, L. Molent : Eng. Failure Anal., 2013, vol. 34, pp. 181-188.10.1016/j.engfailanal.2013.07.036 ↗
10. S. Kim, J.T. Burns, R.P. Gangloff: Eng. Fract. Mech., 2009, vol. 76, pp. 651-67.10.1016/j.engfracmech.2008.11.005 ↗
11. K. van der Walde, J.R. Brockenbrough, B.A. Craig, B.M. Hillberry: Int. J. Fatigue, 2005, vol. 27, pp. 1509-518.10.1016/j.ijfatigue.2005.06.026 ↗
12. K. van der Walde, B.M. Hillberry: Int. J. Fatigue, 2007, vol. 29, pp. 1269–81.10.1016/j.ijfatigue.2006.10.010 ↗
13. Y. Huang, C. Wei, L. Chen, P. Li : Eng. Failure Anal., 2014, vol. 44, pp. 168–178.10.1016/j.engfailanal.2014.05.020 ↗
14. J.J. Medved, M. Breton, P.E. Irving: Int. J. Fatigue, 2004, vol. 26, pp. 71–80.10.1016/S0142-1123(03)00069-0 ↗
15. E.J. Tuegel : Report No. AFRL-VA-WP-TR-2003-3088, Analytical Structural Mechanics Branch, Air Force Reseeach Laboratory, Wright-Patterson Air Force Base, OH, October 2003.
16. K.K. Sankaran, R. Perez, K.V. Jata: Mater. Sci. Eng. A, 2001, vol. 297, pp. 223–29.10.1016/S0921-5093(00)01216-8 ↗
17. ASTM International: Standard Practice for Preparing, Cleaning, and Evaluating Corrosion Test Specimens, in Annual Book of ASTM Standards, ASTM G1-03, ASTM International, West Conshohocken, PA, 2003.
18. Z. Szklarska-Smialowska: Corros. Sci., 1999, vol. 41, pp. 1743–67.10.1016/S0010-938X(99)00012-8 ↗
19. T. Hagyard, J.R. Williams: Trans. Faraday Soc., 1961, vol. 57, pp. 2288-94.10.1039/tf9615702288 ↗
20. S.P. Knight, M. Salagaras, A.M. Wythe, F. De Carlo, A.J. Davenport, A.R. Trueman: Corros. Sci., 2010, vol. 52, pp. 3855–60.10.1016/j.corsci.2010.08.026 ↗
21. S.P. Knight, M. Salagaras, A.R. Trueman: Corros. Sci., 2011, vol. 53, pp. 727–34.10.1016/j.corsci.2010.11.005 ↗
22. B.J. Connolly, D.A. Horner, S.J. Fox, A.J. Davenport, C. Padovani, S. Zhou, A. Turnbull, M. Preuss, N.P. Stevens, T.J. Marrow, J.-Y. Buffiere, E. Boller, A. Groso, M. Stampanoni : Mater. Sci. Technol., 2006, vol. 22, pp. 1076–1085.10.1179/174328406X114199 ↗
23. D.A. Horner, B.J. Connolly, S. Zhou, L. Crocker, A. Turnbull : Corros. Sci., 2011, vol. 53, pp. 3466–3485.10.1016/j.corsci.2011.05.050 ↗
24. A. Turnbull: Proc. R. Soc. Lond. Ser. A, 2014, vol. 470, pp. 254-73.
25. S.M. Ghahari, A.J. Davenport, T. Rayment, T. Suter, J-P. Tinnes, C. Padovani, J.A. Hammons, M. Stampanoni, F. Marone, R. Mokso : Corros. Sci., 2011, vol. 53, pp. 2684–2687.10.1016/j.corsci.2011.05.040 ↗
26. T.J. Stannard, J.J. Williams, S.S. Singh, A.S. Sundaram-Singaravelu, X. Xiao, N. Chawla : Corros. Sci., 2018, vol. 138, pp. 340-52.10.1016/j.corsci.2018.04.029 ↗
27. H. Toda, T. Hidaka, M. Kobayashi, K. Uesugi, A. Takeuchi, K. Horikawa : Acta Mater., 2009, vol. 57, pp. 2277–2290.10.1016/j.actamat.2009.01.026 ↗
28. H. Toda, S. Yamamoto, M. Kobayashi, K. Uesugi, H. Zhang : Acta Mater., 2008, vol. 56, pp. 6027–6039.10.1016/j.actamat.2008.08.022 ↗
29. H. Toda, E. Maire, S. Yamauchi, H. Tsuruta, T. Hiramatsu, M. Kobayashi : Acta Mater., 2011, vol. 59, pp. 1995–2008.10.1016/j.actamat.2010.11.065 ↗
30. J.J. Williams, Z. Flom, A.A. Amell, N. Chawla, X. Xiao, F. De Carlo : Acta Mater., 2010, vol. 58, pp. 6194–6205.10.1016/j.actamat.2010.07.039 ↗
31. J.J. Williams, K.E. Yazzie, N. Connor-Phillips, N. Chawla, X. Xiao, F. Carlo et al: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 3845-3848.10.1007/s11661-011-0963-x ↗
32. E. Ferrie, J.-Y. Buffiere, W. Ludwig : Int. J. Fatigue, 2005, vol. 27, pp. 1215-1220.10.1016/j.ijfatigue.2005.07.015 ↗
33. H. Toda, I. Sinclair, J.-Y. Buffière, E. Maire, T. Connolley, M. Joyce, K.H. Khor, P. Gregson : Philos. Mag., 2003, vol. 83, pp. 2429–2448.10.1080/1478643031000115754 ↗
34. P. Hruby, S.S. Singh, J.J. Williams, X. Xiao, F. De Carlo, N. Chawla : Int. J. Fatigue, 2014, vol. 68, pp. 136–143.10.1016/j.ijfatigue.2014.05.010 ↗
35. S.S. Singh, J.J. Williams, T.J. Stannard, X. Xiao, F. De Carlo, N. Chawla : Corros. Sci., 2016, vol. 104, pp. 330–335.10.1016/j.corsci.2015.12.027 ↗
36. T. Nakayama, F. Yuse, Y. Tsubokawa : Corros. Sci., 2007, vol. 49, pp. 130–138.10.1016/j.corsci.2006.05.030 ↗
37. S.S. Singh, T.J. Stannard, X. Xiao, N. Chawla : JOM, 2017, vol. 69, pp. 1404–1414.10.1007/s11837-017-2413-8 ↗
38. S.S. Singh, J.J. Williams, X. Xiao, F. De Carlo, N. Chawla: Fatigue of Materials II. Springer, Cham, 2013, pp. 17–25.
39. S.S. Singh, J.J. Williams, M.F. Lin, X. Xiao, F. De Carlo, N. Chawla : Mater. Res. Lett., 2014, vol. 2, pp. 217–220.10.1080/21663831.2014.918907 ↗
40. T.J. Marrow, L. Babout, B.J. Connolly, D. Engelberg, G. Johnson, J.-Y. Buffiere, P.J. Withers, and R.C. Newman: Proceedings of the Second International Conference on Environment Induced Cracking of Metals (EICM-2), 2008, vol. 2, pp. 439–47.10.1016/B978-008044635-6.50080-7 ↗
41. A. King, G. Johnson, D. Engelberg, W. Ludwig, J. Marrow: Science, 2008, vol. 321, pp. 382-385.10.1126/science.1156211 ↗
42. J.J. Williams, K.E. Yazzie, E. Padilla, N. Chawla, X. Xiao, F. De Carlo: Int. J. Fatigue, 2013, vol. 57, pp. 79–85.10.1016/j.ijfatigue.2012.06.009 ↗
43. J.T. Burns, S. Kim, R.P. Gangloff: Corros. Sci., 2010, vol. 52, pp. 498–508.10.1016/j.corsci.2009.10.006 ↗
44. K.D. Ralston, N. Birbilis, M.K. Cavanaugh, M. Weyland, B.C. Muddle, R.K.W. Marceau: Electrochim. Acta, 2010, vol. 55, pp. 7834–42.10.1016/j.electacta.2010.02.001 ↗
45. S.S. Singh, J.J. Loza, A.P. Merkle, N. Chawla : Mater. Charact., 2016, vol. 118, pp. 102-111.10.1016/j.matchar.2016.05.009 ↗
46. R.G. Buchheit: J. Electrochem. Soc., 1995, vol. 142, pp. 3994–96.10.1149/1.2048447 ↗
47. R. Goswami, S. Lynch, N.J.H. Holroyd, S.P. Knight, R.L. Holtz: Metall. Mater. Trans. A., 2013, vol. 44A, pp. 1268–78.10.1007/s11661-012-1413-0 ↗
48. X.Y. Sun, B. Zhang, H.Q. Lin, Y. Zhou, L. Sun, J.Q. Wang, E.-H. Han, W. Ke : Corros. Sci., 2013, vol. 77, pp. 103–12.10.1016/j.corsci.2013.07.032 ↗
49. S. Dey, M.K. Gunjan, I. Chattoraj : Corros. Sci., 2008, vol. 50, pp. 2895-2901.10.1016/j.corsci.2008.07.015 ↗
50. F. De Carlo, B. Tieman : Proc. SPIE, 2004, vol. 5535, pp. 644–651.10.1117/12.559223 ↗
51. S. Dezecot, V. Maurel, J.-Y. Buffiere, F. Szmytka, A. Koster : Acta Mater., 2017, vol. 123, pp. 24–34.10.1016/j.actamat.2016.10.028 ↗
52. S.S. Singh, J.J. Williams, P. Hruby, X. Xiao, F. De Carlo, N. Chawla : IMMI, 2014; vol. 3, pp. 1-14.
53. D. Gursoy, F. De Carlo, X. Xiao, C. Jacobsen : J. Synchrotron Radiat., 2014, vol. 21, pp. 1188–93.10.1107/S1600577514013939 ↗
54. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch T, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.Y. Tinevez, D.J. White, V. Hartenstein, K. Eliceiri, P. Tomancak, and A. Cardona: Nat. Methods, 2012, vol. 9, pp. 676–82.10.1038/nmeth.2019 ↗
55. L. Molent: Eng. Fract. Mech., 2015, vol. 137, pp. 12–25.10.1016/j.engfracmech.2014.09.001 ↗
56. P.S. Pao and R.L. Holtz: Report No. NRL/MR/6355, Naval Research Laboratory, Washington, DC, December 2014.
57. K.D. Ralston, N. Birbilis, M. Weyland, C.R. Hutchinson: Acta Mater., 2010, vol. 58, pp. 5941–48.10.1016/j.actamat.2010.07.010 ↗
58. I.S. Raju and J.C. Newman : Fracture Mechanics: 17th Volume, ASTM International, West Conshohocken, PA, 1986, pp. 789–805.10.1520/STP17428S ↗
59. T. Ohnishi, K. Yoshimura : Light Met., 1987, vol. 37, pp. 277–84.10.2464/jilm.37.277 ↗
60. A. Turnbull: Corros. Rev., 2012, vol. 30, pp. 1–17.10.1515/corrrev-2012-0003 ↗
61. R.O. Ritchie, J. Lankford : Mater. Sci. Eng., 1986, vol. 84, pp. 11-16.10.1016/0025-5416(86)90217-X ↗
62. J. Petit, C. Sarrazin-Baudoux : Int. J. Fatigue, 2006, vol. 28, pp. 1471–1478.10.1016/j.ijfatigue.2005.06.057 ↗
63. W. Schaef, M. Marx, H. Vehoff, A. Heckl, P. Randelzhofer : Acta Mater., 2011, vol. 59, pp. 1849-1861.10.1016/j.actamat.2010.11.051 ↗
64. T.J. Marrow, J.Y. Buffiere, P.J. Withers, G. Johnson, D. Engelberg : Int. J. Fatigue, 2004, vol. 26, pp. 717–725.10.1016/j.ijfatigue.2003.11.001 ↗
65. A.K. Vasudevan, K. Sadananda: Metall. Mater. Trans. A., 2011, vol. 42A, pp. 405–414.10.1007/s11661-010-0471-4 ↗
66. R.G. Song, W. Dietzel, B.J. Zhang, W.J. Liu, M.K. Tseng, A. Atrens : Acta Mater., 2004, vol. 52, pp. 4727–4743.10.1016/j.actamat.2004.06.023 ↗
67. G.M. Bond, H.K. Birnbaum, I.M. Robertson: Acta Metall., 1987, vol. 35, pp. 2289–2296.10.1016/0001-6160(87)90076-9 ↗
68. J.S. Warner, R.P. Gangloff: Int. J. Fatigue, 2012, vol. 42, pp. 35–44.10.1016/j.ijfatigue.2011.04.013 ↗
69. A. King, W. Ludwig, M. Herbig, J.-Y. Buffiere, A.A. Khan, N. Stevens, T.J. Marrow: Acta Mater., 2011, vol. 59, pp. 6761–71.10.1016/j.actamat.2011.07.034 ↗
70. S. Niverty, J. Sun, J. Williams, F. Bachmann, N. Gueninchault, E. Lauridsen, N. Chawla : JOM, 2019, vol. 71, pp. 2695-2704.10.1007/s11837-019-03538-0 ↗
71. X.B. Lin, R.A. Smith: Int. J. Mech. Sci., 1998, vol. 40, pp. 405–419.10.1016/S0020-7403(97)00039-8 ↗
72. B. Zafošnik, Z. Ren, M. Ulbin, and J. Flašker: Report in 3rd FENet Technology Workshop held in Trieste, Italy, University of Maribor, Slovenija, September 2002.
73. J.T. Burns, J.M. Larsen, R.P. Gangloff: Fatigue Fract. Eng. Mater. Struct., 2011, vol. 34, pp. 745-73.10.1111/j.1460-2695.2011.01568.x ↗