On the Precipitation of Sigma and Chi Phases in a Cast Super Duplex Stainless Steel
Source abstract
Abstract
Super duplex stainless steels are prone to the formation of undesirable secondary phases, particularly when exposed to slow cooling rates. In the current study, the mechanisms of formation of secondary phases have been characterized using a combination of optical microscopy, scanning electron microscopy, and transmission electron microscopy, on samples aged at temperatures ranging between 700 °C and 1000 °C. Among the possible secondary phases, χ-phase and σ-phase were detected and identified as the main phases responsible for the destabilization of the duplex microstructure. The kinetics of both phases were assessed. In particular, the χ-phase forms prior to σ-phase, until it starts to convert into σ-phase. Finally, the TTT curves for the stable σ-phase were calculated. We found that the precipitation of the σ-phase starts as early as 30 seconds at 950 °C.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. J.-O. Nilsson: Mater. Sci. Technol., 1992, vol. 8, pp. 685–700.10.1179/mst.1992.8.8.685 ↗
2. J. Wan, H. Ruan, and S. Shi: Mater. Sci. Eng., A, 2017, vol. 690, pp. 96-03.10.1016/j.msea.2017.02.056 ↗
3. L. F. Garfias-Mesias, J. M. Sykes and C. D. S. Tuck: Corros. Sci., 1996, vol. 38, pp. 1319-30.10.1016/0010-938X(96)00022-4 ↗
4. N. Pettersson, R. F. A. Pettersson and S. Wessman: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1062-72.10.1007/s11661-014-2718-y ↗
5. A. J. Ramirez, J. C. Lippold and S. D. Brandi: Metall. Mater. Trans. A, 2003, vol. 34, pp. 1575-97.10.1007/s11661-003-0304-9 ↗
6. Y. J. Kim, L. S. Chumbley and B. Gleeson: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3377-86.10.1007/s11661-004-0174-9 ↗
7. J.-O. Nilsson, P. Kangas, T. Karlsson and A. Wilson: Metall. Mater. Trans. A, 2000, vol. 31, pp. 35-45.10.1007/s11661-000-0050-1 ↗
8. R. A. Perren, T. Suter, C. Solenthaler, G. Gullo, P. J. Uggowitzer, H. Bogni and M. O. Speidel: Corros. Sci., 2001, vol. 43, pp. 727-45.10.1016/S0010-938X(00)00088-3 ↗
9. A. R. Akisanya, U. Obi and N. C. Renton: Mater. Sci. Eng., A, 2012, vol. 535, pp. 281-89.10.1016/j.msea.2011.12.087 ↗
10. L. Zhang, Y. Jiang, B. Deng, W. Zhang, J. Xu and J. Li: Mater. Charact., 2009, vol. 60, pp. 1522-28.10.1016/j.matchar.2009.08.009 ↗
11. M. Pohl, O. Storz and T. Glogowski: Mater. Charact., 2007, vol. 58, pp. 65-71.10.1016/j.matchar.2006.03.015 ↗
12. G. Fargas, M. Anglada and A. Mateo: J. Mater. Process. Technol., 2009, vol. 209, pp. 1770-82.10.1016/j.jmatprotec.2008.04.026 ↗
13. J. Michalska and M. Sozańska: Mater. Charact., 2006, vol. 56, pp. 355-62.10.1016/j.matchar.2005.11.003 ↗
14. Y. J. Kim, O. Ugurlu, C. Jiang, B. Gleeson and L. S. Chumbley: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2003-11.
15. D. M. Escriba, E. Materna-Morris, R. L. Plaut and A. F. Padilha: Mater. Charact., 2009, vol. 60, pp. 1214-19.10.1016/j.matchar.2009.04.013 ↗
16. N. L. Isern, H. L. Luque, I. L. Jiménez and M. V. Biezma: Mater. Charact., 2016, vol. 112, pp. 20-29.10.1016/j.matchar.2015.12.004 ↗
17. C. Örnek and D. L. Engelberg: J Mater Sci, 2016, vol. 51, pp. 1931-48.10.1007/s10853-015-9501-3 ↗
18. J. Michalska and B. Chmiela: IOP Conf. Ser.: Mater. Sci. Eng, 2014, vol. 55, pp. 1-9.10.1088/1757-899X/55/1/012010 ↗
19. S. M. Yang, Y. C. Chen, C. H. Chen, W. P. Huang and D. Y. Lin: J. Alloys Compd., 2015, vol. 633, pp. 48-53.10.1016/j.jallcom.2015.01.165 ↗
20. S.-H. Jeon, H.-J. Kim and Y.-S. Park: Corros. Sci., 2014, vol. 87, pp. 1-5.10.1016/j.corsci.2014.06.019 ↗
21. C.-S. Huang and C.-C Shih: Mater. Sci. Eng., A, 2005, vol. 402, pp. 66-75.10.1016/j.msea.2005.03.111 ↗
22. B. Zhang, Z. Jing, H. Li, S. Zhang, H. Feng and H. Li: Mater. Charact., 2017, vol. 129, pp. 31-39.10.1016/j.matchar.2017.04.018 ↗
23. Y.-L. He, N.-Q. Zhu, X.-G. Lu and L. Li: Mater. Sci. Eng. A, 2010, vol. 528, pp. 721-29.10.1016/j.msea.2010.09.067 ↗
24. M. Martins and L. C. Casteletti: Mater. Charact., 2009, vol. 60, pp. 792-95.10.1016/j.matchar.2009.01.005 ↗
25. J. W. Elmer, T. A. Palmer and E. D. Specht: Metall. Mater. Trans. A, 2007, vol. 38, pp. 464-75.10.1007/s11661-006-9076-3 ↗
26. I. Calliari, M. Zanesco and E. Ramous: J Mater Sci, 2006, vol. 41, pp. 7643-49.10.1007/s10853-006-0857-2 ↗
27. E. J. Chun, H. Baba, K. Nishimoto and K. Saida: Mater. Charact., 2013, vol. 86, pp. 152-66.10.1016/j.matchar.2013.10.003 ↗
28. T. H. Lee, H. Y. Ha, B. Hwang and S. J. Kim: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 822-32.10.1007/s11661-011-0935-1 ↗
29. T.H. Chen, K.L. Weng and J.R. Yang: Mater. Sci. Eng. A, 2002, vol. 338, pp. 259-70.10.1016/S0921-5093(02)00093-X ↗
30. J.-O. Nilsson, T. Huhtala, P. Jonsson, L. Karlsson and A. Wilson: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2196-08.10.1007/BF02651874 ↗
31. Y. Ni, Y. M. Jin and A. G. Khachaturyan: Acta Mater., 2007, vol. 55, pp. 4903-14.10.1016/j.actamat.2007.05.016 ↗
32. R. Badji, M. Bouabdallah, B. Bacroix, C. Kahloun, K. Bettahar and N. Kherrouba: Mater. Sci. Eng. A, 2008, vol. 496, pp. 447-54.10.1016/j.msea.2008.06.024 ↗
33. H. Sieurin and R. Sandström: Mater. Sci. Eng. A, 2007, vol. 444, pp. 271-76.10.1016/j.msea.2006.08.107 ↗
34. R. Magnabosco: Mater. Res, 2009, vol. 12, pp. 321-27.10.1590/S1516-14392009000300012 ↗
35. RW Cahn and AL Greer: In: RW Cahn and H Peter (eds.) Physical Metallurgy 4th edn. North-Holland, Amsterdam, 1996, pp. 1723-1830.10.1016/B978-044489875-3/50024-7 ↗
36. S. H. Jeon, S. T. Kim, I. S. Lee, J. S. Kim, K. T. Kim and Y. S. Park: Corros. Sci., 2013, vol. 66, pp. 217-24.10.1016/j.corsci.2012.09.023 ↗