journal article·2019-04-15

Changes in the Microstructure and Mechanical Properties of Railway Wheel Steels as a Result of the Thermal Load Caused by Shoe Braking

Michela Faccoli, Andrea Ghidini, Angelo Mazzù

Publisher page

Abstract

An investigation was carried out to study the effects caused by shoe braking on the microstructure and mechanical properties of ER7, CLASS B, CLASS C, and SANDLOS® wheels as a result of the thermal load. Particular attention was given to cases of exposure to medium and high temperatures, namely from 700 °C to 970 °C, followed by air cooling. Hardness measurements, tensile tests, toughness tests, fatigue crack growth tests, and microstructural observations were carried out on samples extracted from new wheels, with and without heat treatments simulating the microstructural modifications caused by shoe braking. The experiments showed that the hardness, yield strength and ultimate tensile strength of the steels all decrease with the heat-treatment temperature up to 750 °C due to globular pearlite formation. However, after the heat treatment at 970 °C, these properties show a trend inversion, as the globular pearlite no longer appears, while, in some cases, traces of bainite and martensite are observed. On the other hand, the fracture toughness, crack propagation threshold, and rate are not significantly altered by the heat treatments, showing the steels to have a good stability under the thermal loads caused by shoe braking.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Railway Engineering and Dynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. 1. M. Faccoli, A. Ghidini, A. Mazzù: Metall. and Mat. Trans. A, 2018, vol. 49, pp. 4544-4554.10.1007/s11661-018-4749-2 ↗
2. 2. I. Hasegawa, S. Uchida: Japan Railway & Transport Review 1999, vol. 20, pp. 52 - 59.
3. C. Cruceanu: Train Braking, Reliability and Safety in Railway, Dr. Xavier Perpinya (Ed.), InTech, 2012, pp. 29–74. ISBN: 978-953-51-0451-3
4. 4. G. J. Moyar, D. H. Stone: Wear, 1991, vol. 144, pp. 117 – 38.10.1016/0043-1648(91)90010-R ↗
5. 5. D. Nikas, J. Ahlström, A. Malakizadi: Wear, 2016, vol. 366-367, pp. 407 – 415.10.1016/j.wear.2016.04.009 ↗
6. 6. K. Cvetkovski, J. Ahlström, B. Karlsson: Mater. Sci. Technol., 2011, vol. 27, pp. 648 – 654.10.1179/026708310X520538 ↗
7. 7. J. Ahlström, B. Karlsson: Wear, 1999, vol. 232 (1), pp. 1–14.10.1016/S0043-1648(99)00166-0 ↗
8. 8. J. Ahlström, B. Karlsson: Wear, 1999, vol. 232 (1), pp. 15–24.10.1016/S0043-1648(99)00167-2 ↗
9. 9. S. H. Avner: Introduction to Physical Metallurgy, 2nd ed. India: Tata Mcgraw Hill Pub., 1997.
10. 10. J. Jergéus: IMechE J. Rail Rapid Transit, 1998, vol. 212, pp. 69 – 79.
11. 11. K. Handa, Y. Kimura and Y. Mishima: Wear, 2010, vol. 268 (1), pp. 50 – 58.10.1016/j.wear.2009.06.029 ↗
12. 12. O. Orringer, D. E. Geay: Theor. Appl. Fract. Mech., 1995, vol. 23, pp. 55 – 65.10.1016/0167-8442(95)00004-X ↗
13. 13. T. Vernersson: Proc IMechE, Part F: J. Rail Rapid Transit, 2007, vol. 221(2), pp. 167– 182.
14. 14. T. Vernersson: Proc IMechE, Part F: J. Rail Rapid Transit, 2007, vol. 221(4), pp. 429 – 442.
15. 15. M. Petersson, T. Vernesson: Wear, 2002, vol. 253, pp. 301- 307.10.1016/S0043-1648(02)00121-7 ↗
16. 16. K. L. Johnson: Proc. Inst. Mech. Eng., 1989, vol. 203, pp. 151–63.10.1243/PIME_PROC_1989_203_100_02 ↗
17. 17. A. F. Bower: ASME J. Tribol., 1988, 110, pp. 704-11.10.1115/1.3261717 ↗
18. K.O. Edel: Querrisse im Radkranz klotzgebremster Güterwagenvollräder, Report, University (FH), Brandenburg, Germany, 1995.
19. Y.C. Li: Analysis of fatigue phenomena in railway rails and wheels, Handbook of fatigue crack propagation in metallic structures, Amsterdam, Elsevier, 1994, pp. 1497–1537.10.1016/B978-0-444-81645-0.50020-2 ↗
20. 20. M. Faccoli, C. Petrogalli, M. Lancini, A. Ghidini, A. Mazzù: Wear, 2018, vol. 396-397, pp. 146-161.10.1016/j.wear.2017.05.012 ↗
21. 21. A. Ghidini, M. Faccoli, A. Mazzù, C. Petrogalli: Ingegneria Ferroviaria, 2018, vol. 9, pp. 729-742.
22. 22. D. Zeng, L. Lu, Y. Gong, N. Zhang, Y. Gong: Mater. Des., 2016, vol. 92, pp. 998 – 1006.10.1016/j.matdes.2015.12.096 ↗
23. 23. T. Gladman, I. McIvor, F. Pickering: J. Iron Steel Inst., 1972, vol. 210, pp. 916 – 930.
24. 24. J. Hyzak and I. Bernstein: Metall. Mater. Trans. A, 1976, vol. 7A (7), pp. 1217 – 1224.10.1007/BF02656606 ↗
25. 25. O. P. Modi, N. Deshmukh, D. P. Mondal, A. K. Jha, A. H. Yegneswaran and H. K. Khaira: Mater. Charact., 2001, vol. 46 (5), pp. 347 – 352.10.1016/S1044-5803(00)00113-3 ↗
26. 26. A. Marder and B. Bramfitt: Metall. Mater. Trans. A, 1976, vol. 7A (2), pp. 365 – 372.10.1007/BF02642832 ↗
27. 27. D. Zeng, L. Lu, Y. Gong, Y. Zhang, J.Zhang: Wear, 2017, vol. 372-373, pp. 158 – 168.10.1016/j.wear.2016.12.025 ↗
28. 28. G. Miyamoto, J.C. Oh, K. Hono, T. Furuhara, T. Maki: Acta Mater., 2007, vol. 55, pp. 5027 – 5038.10.1016/j.actamat.2007.05.023 ↗
29. 29. K. Cvetkovski, J. Ahlström, B. Karlsson: Wear, 2011, vol. 271, pp. 382 – 387.10.1016/j.wear.2010.10.047 ↗
30. 30. A. Ghidini, M. Diener, J. Schneider: Wheels for freight cars, LRS-Techno Series vol. 3, Lucchini RS, Lovere, Italy, 2010.
31. 31. A. Ghidini, M. Diener, J. Schneider: Special wheels for mass transit, LRS-Techno Series vol. 7, Lucchini RS, Lovere, Italy, 2014.
32. 32. H. Soares, T. Zucarelli, M. Vieira, M. Freitas, L. Reis: Procedia Structural Integrity, 2016, vol. 1, pp. 265–272.10.1016/j.prostr.2016.02.036 ↗
33. T Zucarelli, L MoreiraFilho, H Soares, M Vieira, L Reis (2016) Theor. Appl. Fract. Mech. 85:134–139.10.1016/j.tafmec.2016.08.027 ↗
34. 34. T. Kato, Y. Yamamoto, H. Kato, S. Dedmon, J. Pilch: Eng. Fract. Mech., 2017, vol. 186, pp. 255–267.10.1016/j.engfracmech.2017.09.025 ↗
35. 35. M. Diener, A. Ghidini: Mater. Perform. and Charact., 2014, vol. 3 (3), pp. 286 – 304.10.1520/MPC20130047 ↗
36. J. F. Knott: Fundamentals of Fracture Mechanics, Butterworths, London, 1973.
37. 37. Y. Park, I. Bernstein: Metall. Trans. A, 1979, vol. 10, pp. 1653–1664.10.1007/BF02811698 ↗
38. 38. A. Hohenwarter, A. Taylor, R. Stock, R. Pippan: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1609–1618.10.1007/s11661-010-0541-7 ↗
39. 39. Z. X. Liu, H. C. Gu: J. Mater. Eng. Perform., 2000, vol. 9, pp. 580 – 584.10.1361/105994900770345728 ↗