Effect of Starting As-cast Structure on the Microstructure–Texture Evolution During Subsequent Processing and Finally Ridging Behavior of Ferritic Stainless Steel
Source abstract
Abstract
Effect of the initial as-cast structure on the microstructure–texture evolution during thermomechanical processing of 409L grade ferritic stainless steel was studied. Samples from the regions of cast slab having ‘columnar,’ ‘equiaxed,’ and a mixture of ‘columnar’ and ‘equiaxed’ grains were subjected to two different processing schedules: one with intermediate hot-band annealing before cold-rolling followed by final annealing, and another without any hot-band annealing. EBSD study reveals that large columnar crystals with cube orientation are very difficult to deform and recrystallize uniformly. Resultant variations in ferrite grain structure and retention of cube-textured band in cold-rolled and annealed sheet contribute to ridging behavior during stretch forming. Initial equiaxed grain structure is certainly beneficial to reduce or even eliminate ridging defect by producing uniform ferrite grain structure, free from any texture banding. Application of hot-band annealing treatment is also advantageous as it can maximize the evolution of beneficial gamma-fiber texture and eliminate the ridging defect in case of completely ‘equiaxed’ starting structure. Such treatment reduces the severity of ridging even if the initial structure contains typically mixed ‘columnar-equiaxed’ grains.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (69)
Show source-provided references
1. S. Patra and L. K. Singhal: Mater. Sci. Appl., 2013, vol. 4, pp. 70–76.
2. C. Zhang, Z. Liu, and G. Wang: J. Mater. Process. Technol., 2011, vol. 211, pp. 1051–59.10.1016/j.jmatprotec.2011.01.005 ↗
3. G. M. Sim, J. C. Ahn, S. C. Hong, K. J. Lee, and K. S. Lee: Mater. Sci. Eng. A, 2005, vol. 396, pp. 159–65.10.1016/j.msea.2005.01.030 ↗
4. Y. Yazawa, Y. Ozaki, Y. Kato, and O. Furukimi: JSAE Rev., 2003, vol. 24, pp. 483–88.10.1016/S0389-4304(03)00082-1 ↗
5. N. Fujita, K. Ohmura, and A. Yamamoto: Mater. Sci. Eng. A, 2003, vol. 351, pp. 272–81.10.1016/S0921-5093(02)00831-6 ↗
6. V. Kuzucu, M. Aksoy, M.H. Korkut, and M.M. Yildirim: Mater. Sci. Eng. A, 1997, vol. 230, pp. 75–80.10.1016/S0921-5093(97)00010-5 ↗
7. R. N. Wright: Metall. Trans., 1972, vol. 3, pp. 83–91.10.1007/BF02680588 ↗
8. J. Han, H. Li, and H. Xu: Mater. Des., 2014, vol. 58, pp. 518–26.10.1016/j.matdes.2014.02.009 ↗
9. X. Zhang, L. Fan, Y. Xu, J. Li, X. Xiao, and L. Jiang: Mater. Des., 2016, vol. 89, pp. 626–35.10.1016/j.matdes.2015.09.147 ↗
10. X. Zhang, L. Fan, Y. Xu, J. Li, X. Xiao, and L. Jiang: Mater. Des., 2015, vol. 65, pp. 682–89.10.1016/j.matdes.2014.09.074 ↗
11. J. Han, H. Li, Z. Zhu, F. Barbaro, L. Jiang, H. Xu, and L. Ma: Mater. Des., 2014, vol. 63, pp. 238–46.10.1016/j.matdes.2014.05.070 ↗
12. M. Alizadeh-Sh, S.P.H. Marashi, and M. Pouranvari: Mater. Des., 2014, vol. 56, pp. 258–63.10.1016/j.matdes.2013.11.022 ↗
13. F. Gao, Z. Liu, H. Liu, and G. Wang: Mater. Charact., 2013, vol. 75, pp. 93–100.10.1016/j.matchar.2012.09.006 ↗
14. S. V. Mehtonen, E. J. Palmiere, R. D K Misra, L. P. Karjalainen, and D. A. Porter: Mater. Sci. Eng. A, 2014, vol. 601, pp. 7–19.10.1016/j.msea.2014.02.039 ↗
15. J. Shu, H. Bi, X. Li, and Z. Xu: J. Mater. Process. Technol., 2012, vol. 212, pp. 59–65.10.1016/j.jmatprotec.2011.08.004 ↗
16. H. F G De Abreu, A. D S Bruno, S. S M Tavares, R. P. Santos, and S. S. Carvalho: Mater. Charact., 2006, vol. 57, pp. 342–47.10.1016/j.matchar.2006.02.015 ↗
17. H. J. Shin, J. K. An, S. H. Park, and D. N. Lee: Acta Mater., 2003, vol. 51, pp. 4693–4706.10.1016/S1359-6454(03)00187-3 ↗
18. R. P. Siqueira, H. R.Z. Sandim, T. R. Oliveira, and D. Raabe: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3513–19.10.1016/j.msea.2011.01.007 ↗
19. X.-Y. Fang, W.-G. Wang, H. Guo, C.-X. Qin, and B.-X. Zhou: J. Cent. South Univ., 2012, vol. 19, pp. 3363–68.10.1007/s11771-012-1415-5 ↗
20. P. D. Wu, H. Jin, Y. Shi, and D. J. Lloyd: Mater. Sci. Eng. A, 2006, vol. 423, pp. 300–305.10.1016/j.msea.2006.02.043 ↗
21. P. D. Wu, D. J. Lloyd, and Y. Huang: Mater. Sci. Eng. A, 2006, vol. 427, pp. 241–45.10.1016/j.msea.2006.04.045 ↗
22. M. Y. Huh, J. H. Lee, S. H. Park, O. Engler, and D. Raabe: Steel Res. Int., 2005, vol. 76, pp. 797–806.10.1002/srin.200506098 ↗
23. R. D. Knutsen and N. J. Wittridge: Mater. Sci. Technol., 2002, vol. 18, pp. 1279–85.10.1179/026708302225007457 ↗
24. O. Engler, M. Y. Huh, and C. N. Tomé: Metall. Mater. Trans. A Phys. Metall. Mater. Sci., 2005, vol. 36, pp. 3127–39.10.1007/s11661-005-0084-5 ↗
25. F. Gao, F. X. Yu, R. D.K. Misra, Xi. J. Zhang, S. M. Zhang, and Z. Y. Liu: J. Mater. Eng. Perform., 2015, vol. 24, pp. 3862–80.10.1007/s11665-015-1689-5 ↗
26. H.-J. Shin, J.-K. An, and D. N. Lee: 2004, pp. 275–82.
27. S. Patra, A. Ghosh, J. Sood, L. K. Singhal, A. S. Podder, and D. Chakrabarti: Mater. Des., 2016, vol. 106, pp. 336–48.10.1016/j.matdes.2016.05.100 ↗
28. K. Kimura, K. Ushioda, E. Ishimaru, and A. Takahashi: Mater. Sci. Eng. A, 2016, vol. 663, pp. 86–97.10.1016/j.msea.2016.03.078 ↗
29. D. Raabe and K. Lüucke: Mater. Sci. Technol., 1993, vol. 9, pp. 302–12.10.1179/mst.1993.9.4.302 ↗
30. I. Samajdar, B. Verlinden, P. Van Houtte, and D. Vanderschueren: Mater. Sci. Eng. A, 1997, vol. 238, pp. 343–50.10.1016/S0921-5093(97)00455-3 ↗
31. A. Martínez-de-Guerenu, F. Arizti, M. Díaz-Fuentes, and I. Gutiérrez: Acta Mater., 2004, vol. 52, pp. 3657–64.10.1016/j.actamat.2004.04.019 ↗
32. N. J. Wittridge and R. D. Knutsen: Mater. Sci. Eng. A, 1999, vol. 269, pp. 205–16.10.1016/S0921-5093(99)00145-8 ↗
33. X. Ma, J. Zhao, W. Du, X. Zhang, L. Jiang, and Z. Jiang: Mater. Sci. Eng. A, 2017, vol. 685, pp. 358–66.10.1016/j.msea.2017.01.021 ↗
34. I. Samajdar, B. Verlinden, L. Kestens, and P. Van Houtte: Acta Mater, 1999, vol. 47, pp. 55–65.10.1016/S1359-6454(98)00337-1 ↗
35. J. J. Jonas and L. Kestens: Mater. Sci. Forum, 1996, vol. 204–206, pp. 155–68.10.4028/www.scientific.net/MSF.204-206.155 ↗
36. K. Verbeken and L. Kestens: Mater. Sci. Forum, 2002, vol. 408–412, pp. 559–64.10.4028/www.scientific.net/MSF.408-412.559 ↗
37. R. Petrov, L. Kestens, K. Verbeken, and Y. Houbaert: Mater. Sci. Forum, 2004, vol. 467–470, pp. 305–10.10.4028/www.scientific.net/MSF.467-470.305 ↗
38. K. Verbeken and L. Kestens: Mater. Sci. Forum, 2005, vol. 495–497, pp. 1189–94.10.4028/www.scientific.net/MSF.495-497.1189 ↗
39. T. Tsuchiyama, R. Hirota, K. Fukunaga, and S. Takaki: ISIJ Int., 2005, vol. 45, pp. 923–29.10.2355/isijinternational.45.923 ↗
40. F. Gao, Z. Liu, R. D. K. Misra, H. Liu, and F. Yu: Met. Mater. Int., 2014, vol. 20, pp. 939–51.10.1007/s12540-014-5020-z ↗
41. F. V. Braga, D. P. Escobar, T. A. Reis, N. J. L. D. Oliveira, and M. S. Andrade: J. Mater. Res. Technol., 2016, vol. 5, pp. 92–99.10.1016/j.jmrt.2015.07.003 ↗
42. J. H. Lee, S. H. Park, and M. Y. Huh: Mater. Sci. Forum, 2004, vol. 449–452, pp. 113–16.10.4028/www.scientific.net/MSF.449-452.113 ↗
43. Md. Zaid and P. P. Bhattacharjee: Mater. Charact., 2014, vol. 96, pp. 263–72.10.1016/j.matchar.2014.08.006 ↗
44. M. Y. Huh and O. Engler: Mater. Sci. Eng. A, 2001, vol. 308, pp. 74–87.10.1016/S0921-5093(00)01995-X ↗
45. J. Mola, I. Jung, J. Park, D. Chae, and B. C D E Cooman: 2011.
46. H. T. Liu, Z. Y. Liu, Y. Q. Qiu, G. M. Cao, C. G. Li, and G. D. Wang: Mater. Charact., 2009, vol. 60, pp. 79–82.10.1016/j.matchar.2008.06.005 ↗
47. V Engler, O; Randle: Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping. 2 Edn, CRC Press, Baco Raton 2008.
48. D. Chakrabarti, C. Davis, and M. Strangwood: Mater. Charact., 2007, vol. 58, pp. 423–38.10.1016/j.matchar.2006.06.014 ↗
49. ASTM: E517, 1998, vol. 3, pp. 1–8.
50. ASTM: E8/E8M—13a, 2009, pp. 1–27.
51. [51] F. Gao, Z. Y. Liu, H. T. Liu, and G. D. Wang: J. Iron Steel Res. Int., 2013, vol. 20, pp. 31–38.10.1016/S1006-706X(13)60079-5 ↗
52. H. Yan, H. Bi, X. Li, and Z. Xu: J. Mater. Process. Technol., 2009, vol. 209, pp. 2627–31.10.1016/j.jmatprotec.2008.06.012 ↗
53. [53] Y Hayakawa, J A Szpunar, G Palumbo, and P Lin: J. Magn. Magn. Mater., 1996, vol. 160, pp. 143–44.10.1016/0304-8853(96)00141-2 ↗
54. Y Hayakawa, M Muraki, and J A Szpunar: Acta Mater., 1998, vol. 46, pp. 1063–73.10.1016/S1359-6454(97)00303-0 ↗
55. L. Tan, T. R. Allen, and J. T. Busby: J. Nucl. Mater., 2013, vol. 441, pp. 661–66.10.1016/j.jnucmat.2013.03.050 ↗
56. C. M. Sellars and J. A. Whiteman: Met. Sci., 1979, vol. 13, pp. 187–94.10.1179/msc.1979.13.3-4.187 ↗
57. N. Tsuji, K. Tsuzaki, and T. Maki: ISIJ Int., 1992, vol. 32, pp. 1319–28.10.2355/isijinternational.32.1319 ↗
58. I. Tikhovskiy, D. Raabe, and F. Roters: Scr. Mater., 2006, vol. 54, pp. 1537–42.10.1016/j.scriptamat.2005.12.038 ↗
59. R. K. Ray and J. J. Jonas: Int. Mater. Rev., 1990, vol. 35, pp. 1–36.10.1179/095066090790324046 ↗
60. S. H. Park, K. Y. Kim, Y. D. Lee, and C. G. Park: ISIJ Int., 2002, vol. 42, pp. 100–105.10.2355/isijinternational.42.100 ↗
61. G. E. Dieter: Mech. Metall. SI Metr. Ed. McGraw-Hill B. Co, 1962, vol. 273, p. 338.
62. R. W. Hertzberg: Deform. Fract. Mech. Eng. Mater. 2nd Ed. J. Wiley Sons, 1996, p. 810.
63. J. C. Kim, J. J. Kim, J. Y. Choi, J. H. Choi, and S. K. Kim: Metall. Ital., 2009, vol. 101, pp. 43–48.
64. Hashimoto S, Takahashi A, Hamada J, Kimura K, Morohoshi T, Yamada Y, Kakihara T (2008) Pat Appl Publ 1:455
65. K. Kimura, S. Fukumoto, G. Shigesato, and A. Takahashi: Tetsu-to-Hagane, 2012, vol. 98, pp. 601–9.10.2355/tetsutohagane.98.601 ↗
66. C. Wang, H. Gao, Y. Dai, X. Ruan, J. Wang, and B. Sun: Metall. Mater. Trans. A, 2010, vol. 41, pp. 1616–20.10.1007/s11661-010-0228-0 ↗
67. H. Takeuchi, H. Mori, Y. Ikehara, T. Komano, and T. Yanai: Trans. Iron Steel Inst. Japan, 1981, vol. 21, pp. 109–16.10.2355/isijinternational1966.21.109 ↗
68. V. Villaret, F. Deschaux-Beaume, and C. Bordreuil: J. Mater. Process. Technol., 2016, vol. 233, pp. 115–24.10.1016/j.jmatprotec.2016.02.017 ↗
69. J. Han, H. Li, F. Barbaro, Z. Zhu, L. Jiang, H. Xu, and L. Ma: Mater. Sci. Eng. A, 2014, vol. 616, pp. 20–28.10.1016/j.msea.2014.07.107 ↗