journal article·2016-03

High Temperature Strength and Stress Relaxation Behavior of Dilute Binary Mg Alloys

Saeideh Abaspour, Carlos H. Cáceres

Publisher page

Abstract

Monotonic compression and stress relaxation tests were carried out on specimens of 6 cast binary alloys with (at. pct) 2.5 Al, 0.6 Sn, 2.2 Zn, 0.9 Nd, 0.8 Gd and 1.3 Y, and of a similarly cast AZ91D alloy for reference. The solute concentration of the binary alloys was kept deliberately low to limit precipitation hardening effects during the testing, done in the solution heat treated and quenched condition. Compression testing was carried out at 298 K, 373 K and 453 K (25 °C, 100 °C and 180 °C) for all of the alloys and at 493 K and 523 K (220 °C and 250 °C) for the Nd-, Gd- and Y- containing ones. Stress relaxation was done at 453 K (180 °C) at either a predetermined strain (0.05) or stress (150 MPa). The Mg-Al and the AZ91 alloys softened considerably above 373 K (100 °C). The rest of the alloys exhibited increasing linear strain hardening in compression and reduced stress relaxation, in the order Sn, Zn, Nd, Gd and Y, an indication of a progressively stable dislocation substructure, hence of an increasingly extended athermal regime in the strength-temperature relationship. The overall strain hardening behavior matches that of commercial alloys involving the same solutes at comparable or higher concentrations, and can be accounted for through the respective tendency of the solute atoms to develop short range order. This tendency is lowest for the near-random solid solution introduced by Al, and highest for Nd, Gd and Y, in agreement with their respective phase diagrams. The implications for creep resistant alloy selection and design are discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Hydrogen Storage and Materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. J.R. Terbush, N.D. Saddock, J.W. Jones, T.M. Pollock, Metallurgical and Materials Transactions A, 41 (2010) 2435-2442.10.1007/s11661-010-0271-x ↗
2. [2] J.-F. Nie, Metallurgical and Materials Transactions A, 43 (2012) 3891-3939.10.1007/s11661-012-1217-2 ↗
3. [3] B.L. Mordike, Materials Science and Engineering A, 324 (2002) 103-112. http://dx.doi.org/10.1016/S0921-5093(01)01290-410.1016/S0921-5093(01)01290-4 ↗
4. [4] M.O. Pekguleryuz, A.A. Kaya, Advanced Engineering Materials, 5 (2003) 866-878.10.1002/adem.200300403 ↗
5. M. Pekguleryuz, M. Celikin, International Materials Reviews, 55 (2010) 197-217. http://dx.doi.org/10.1179/095066010X1264689872832710.1179/095066010X12646898728327 ↗
6. [6] M.S. Dargusch, G.L. Dunlop, A.L. Bowles, K. Pettersen, P. Bakke, Metallurgical and Materials Transactions A, 35 (2004) 1905-1909.10.1007/s11661-004-0099-3 ↗
7. K. Maruyama, M. Suzuki, S. Hiroyuki, Metallurgical and Materials Transactions A, 33 (2002) 875-882.10.1007/s11661-002-0157-7 ↗
8. [8] I. Moreno, T. Nandy, J. Jones, J. Allison, T. Pollock, Scripta Materialia, 45 (2001) 1423-1429.10.1016/S1359-6462(01)01179-4 ↗
9. [9] M.A. Gibson, X. Fang, C.J. Bettles, C.R. Hutchinson, Scripta Materialia, 63 (2010) 899-902. http://dx.doi.org/10.1016/j.scriptamat.2010.07.00210.1016/j.scriptamat.2010.07.002 ↗
10. [10] S.M. Zhu, M.A. Gibson, M.A. Easton, J.F. Nie, Scripta Materialia, 63 (2010) 698-703. http://dx.doi.org/10.1016/j.scriptamat.2010.02.00510.1016/j.scriptamat.2010.02.005 ↗
11. [11] K.V. Yang, M.A. Easton, C.H. Caceres, Advanced Engineering Materials, 15 (2013) 302-307. http://dx.doi.org/10.1002/adem.20120018810.1002/adem.201200188 ↗
12. [12] B. Zhang, S. Gavras, A.V. Nagasekhar, C.H. Cáceres, M.A. Easton, Metallurgical and Materials Transactions A, 45 (2014) 1-12. http://dx.doi.org/10.1007/s11661-014-2416-910.1007/s11661-014-2416-9 ↗
13. [13] T.L. Chia, M.A. Easton, S.M. Zhu, M.A. Gibson, N. Birbilis, J.F. Nie, Intermetallics, 17 (2009) 481-490. 10.1016/j.intermet.2008.12.00910.1016/j.intermet.2008.12.009 ↗
14. [14] K. Yang, C. Cáceres, M. Easton, Metallurgical and Materials Transactions A, 45 (2014) 4117-4128. http://dx.doi.org/10.1007/s11661-014-2326-x10.1007/s11661-014-2326-x ↗
15. [15] B. Zhang, A.V. Nagasekhar, X. Tao, Y. Ouyang, C.H. Cáceres, M. Easton, Materials Science and Engineering: A, 599 (2014) 204-211.10.1016/j.msea.2014.01.074 ↗
16. S. Abaspour, C. Cáceres, Metallurgical and Materials Transactions A, 46 (2015) 5972-5988. http://dx.doi.org/10.1007/s11661-015-3128-510.1007/s11661-015-3128-5 ↗
17. S. Abaspour and C. Cáceres: in Magnesium Technology, M. Alderman, M.V. Manuel, N. Hort, and N.R. Neelameggham, eds., The Minerals, Metals & Materials Society (TMS), San Diego, 2014, pp. 71–75.
18. S. Abaspour and C.H. Caceres: in Magnesium Technology, N. Hort, S.N. Mathaudhu, N.R. Neelameggham, and M. Alderman, eds., The Minerals, Metals & Materials Society (TMS), San Antonio, 2013, pp. 17–20.
19. [19] G.-w. Chang, S.-y. Chen, C. Zhou, X.-d. Yue, Y.-h. Qi, Transactions of Nonferrous Metals Society of China, 20 (2010) 289-293. http://dx.doi.org/10.1016/S1003-6326(09)60136-910.1016/S1003-6326(09)60136-9 ↗
20. [20] C.H. Caceres, G.E. Mann, J.R. Griffiths, Metallurgical and Materials Transactions A, 42 (2011) 1950-1959. http://dx.doi.org/10.1007/s11661-010-0599-210.1007/s11661-010-0599-2 ↗
21. [21] S. Xu, M.A. Gharghouri, M. Sahoo, Advanced Engineering Materials, 9 (2007) 807-812.10.1002/adem.200700163 ↗
22. [22] D. Kuhlmann-Wilsdorf, Metallurgical and Materials Transactions, 35A (2004) 369-418.10.1007/s11661-004-0351-x ↗
23. [23] C.H. Cáceres, P. Lukác, Philosophical Magazine A, 88 (2008) 977-989. http://dx.doi.org/10.1080/1478643080196861110.1080/14786430801968611 ↗
24. [24] U.F. Kocks, H. Mecking, Progress in Materials Science, 48 (2003) 171-273.10.1016/S0079-6425(02)00003-8 ↗
25. H. Mecking: in Strength of Metals and Alloys (ICSMA-5), P. Haasen, V. Gerold, and G. Kostorz, eds., Pergamon Press, NY, 1979, pp. 1573–94.10.1016/B978-1-4832-8412-5.50246-0 ↗
26. [26] H. Suzuki, in: J C Fisher, W G Johnston, R Thomson, T Vreeland (Eds.) Dislocations and mechanical properties of crystals, John Wiley, New York, 1957, pp. 361-390.
27. [27] K. Sadananda, M.J. Marcinkowski, Journal of Applied Physics, 44 (1973) 1989- 1996. http://dx.doi.org/10.1063/1.166250410.1063/1.1662504 ↗
28. S. Gavras, S. Zhu, M.A. Gibson, M.A. Easton, and J.-F. Nie: in 9th International Conference on Magnesium alloys and their Applications, Karl-Ulrich Kainer Warren J. Poole, ed., Vancouver, 2012, pp. 757–764.
29. T.J. Pike, B. Noble, Journal of the Less Common Metals, 30 (1973) 63-74. http://dx.doi.org/10.1016/0022-5088(73)90007-610.1016/0022-5088(73)90007-6 ↗
30. L. Moreno, T. Nandy, J. Jones, J. Allison, and T. Pollock: in Magnesium Technology, H.I. Kaplan, ed., TMS, 2002, pp. 111–116
31. [31] Z. Trojanová, P. Lukác, Journal of Materials Processing Technology, 162-163 (2005) 416-421.10.1016/j.jmatprotec.2005.02.024 ↗
32. [32] S. Zhu, M.A. Easton, T.B. Abbott, J.-F. Nie, M.S. Dargusch, N. Hort, M.A. Gibson, Metallurgical and Materials Transactions A, 46 (2015) 1-12. http://dx.doi.org/10.1007/s11661-015-2946-910.1007/s11661-015-2946-9 ↗
33. [33] A.A. Luo, B.R. Powell, M.P. Balogh, Metallurgical and Materials Transactions A, 33 (2002) 567-574. http://dx.doi.org/10.1007/s11661-002-0118-110.1007/s11661-002-0118-1 ↗
34. C.H. Cáceres, and A. Blake: Physica Status Solidi, 194 (a) (2002) 147–158.10.1002/1521-396X(200211)194:1<147::AID-PSSA147>3.0.CO;2-L ↗
35. [35] R.F. Zhang, B.X. Liu, Applied Physics Letters, 81 (2002) 1219-1221. doi:http://dx.doi.org/10.1063/1.149951010.1063/1.1499510 ↗
36. [36] T. Wang, L. Jiang, R. Mishra, J. Jonas, Metallurgical and Materials Transactions A, 45 (2014) 4698-4709. http://dx.doi.org/10.1007/s11661-014-2371-510.1007/s11661-014-2371-5 ↗