journal article·2016-01Open access

Zn Diffusion and α-Fe(Zn) Layer Growth During Annealing of Zn-Coated B Steel

Vit Janik, Yongjun Lan, Peter Beentjes, David Norman, Guido Hensen, Seetharaman Sridhar

Abstract

Direct hot press forming of Zn-coated 22MnB5 steels is impeded by micro-cracks that occur in the substrate due to the presence of Zn during the forming process. A study was therefore undertaken to quantify concentration of Zn across the α-Fe(Zn) coating and on grain boundaries in the α-Fe(Zn) layer and the underlying γ-Fe(Zn) substrate after isothermal annealing of Zn-coated 22MnB5 at 1173 K (900 °C) and to link the Zn distribution to the amount and type of micro-cracks observed in deformed samples. Finite difference model was developed to describe Zn diffusion and the growth of the α-Fe(Zn) layer. The penetration of Zn into the γ-Fe(Zn) substrate after 600 seconds annealing at 1173 K (900 °C) through bulk diffusion is estimated to be 3 μm, and the diffusion depth of Zn on the γ-Fe(Zn) grain boundaries is estimated to be 6 μm, which is significantly shorter than the maximum length (15 to 50 μm) of the micro-cracks formed in the severely stressed conditions, indicating that the Zn diffusion into the γ-Fe(Zn) from the α-Fe(Zn) during annealing is not correlated to the depth of micro-cracks. On the other hand, the maximum amount of Zn present in α-Fe(Zn) layer decreases with annealing time as the layer grows and Zn oxidizes, and the amount of Zn-enriched areas inside the α-Fe(Zn) layer is reduced leading to reduced length of cracking. Solid-Metal-Induced Embrittlement mechanism is proposed to explain the benefit of extended annealing on reduced depth of micro-crack penetration into the γ-Fe(Zn) substrate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. European Automotive Research Partners Association R&D technology Roadmap, http://www.earpa.eu/docs/2005/furore_road_map_final.pdf
2. T Altan, Update: Hot-stamping boron-alloyed steels for automotive parts, Stamping Journal, March/April, (2011)
3. S. Kim, I. Son, D. Kim, and S. Kim: 4th Int. Conf. on Hot Sheet Met. Forming of UHSS, Lulea, 2013.
4. P. Drillet, R. Grigorieva, G. Leuillier, and T. Vietoris: Study of Cracks Propagation Inside the Steel on Press Hardened Steel Zinc Based Coatings, 2011, Galvatech, Genova
5. M.J. van Genderen, W. Verloop, J. Loiseaux, and G. Hensen: 3rd Int. Conf. on Hot Sheet Met. Forming of UHSS, Kassel, 2011
6. C.W. Lee, D.W. Fan, I.R. Sohn, S.J. Lee, and B.C. De Cooman: Metall. Mater. Trans. A, 2012, vol. 43, 5122-512710.1007/s11661-012-1316-0 ↗
7. L Cho, H Kang, C Lee, BC De Cooman, Scripta Mater 90-91 (2014) 25-28.10.1016/j.scriptamat.2014.07.008 ↗
8. T. Kurz, G. Luckeneder, T. Manzenreiter, and H. Schwinghammer: Zinc Coated Press-Hardening Steel—Challenges and Solutions, SAE Technical Paper 2015-01-0565, 201510.4271/2015-01-0565 ↗
9. G. Hensen, W. Melfo, and S.P. Chen: 4th Int. Conf. on Hot Sheet Met. Forming of UHSS, Lulea, 2013.
10. A.R. Marder: Prog. Mater. Sci., 2000, vol. 45, pp. 199–271.10.1016/S0079-6425(98)00006-1 ↗
11. R Autengruber, G Luckeneder, S Kolnberger, J Faderl, A W Hassel, Steel Research Int 83 (2012) 1005–1110.1002/srin.201200068 ↗
12. V. Janik, P. Beentjes, D. Norman, G. Hensen, and S. Seetharaman: Proceedings of MST2014 Conference, Pittsburgh, 2014, p. 299
13. I Richter, M Feller-Kniepmeier, Phys. Status Solidi (A) 68 (1981) 289–300.10.1002/pssa.2210680138 ↗
14. E.A. Brandes and G.B. Brook, eds.: Smithells Metals Reference Book, 7th ed., Butterworth & Heinemann, Oxford, 1992.
15. JS Dohie, JR Cahoon, WF Caley, JPEDAV 28 (2007) 322-327.10.1007/s11669-007-9093-y ↗
16. P. Heitjans and J. Karger, eds., Diffusion in Condensed Matter: Methods, Materials, Models, 2nd ed., Birkhauser, Boston, 2005.10.1007/3-540-30970-5 ↗
17. RTP Whipple, Philos Mag 45 (1954) 1225.10.1080/14786441208561131 ↗
18. H. Schwinghammer, G. Luckenender, T. Manzenreiter, M. Rosner, P. Tsipouridis, and T. Kurz: 4th Int. Conf. on Hot Sheet Met. Forming of UHSS, Lulea, 2013.
19. SP Lynch, Mat Sci Eng A108 (1989) 203-21210.1016/0921-5093(89)90421-8 ↗
20. SP Lynch, Mat Characterization 28 (1992) 279-289.10.1016/1044-5803(92)90017-C ↗
21. P. Gordon: Metall. Trans., 1978, vol. 9A, pp. 267–27310.1007/BF02646710 ↗
22. S.P. Lynch: Acta Metall., 1988, vol. 36, pp. 2639–6110.1016/0001-6160(88)90113-7 ↗
23. S.P. Lynch: in Environment Induced Cracking of Materials, S. Shipilov, R. Jones, J.-M. Olive, and R. Rebak, eds., Elsevier, Amsterdam, 2007, pp. 167–177.10.1016/B978-008044635-6.50016-9 ↗
24. S.P. Lynch: Metall. Trans., 2013, vol. 44A, 1209–29.10.1007/s11661-012-1359-2 ↗