journal article·2015-07

Phase-Field Simulation of Microstructure Evolution in Industrial A2214 Alloy During Solidification

Ming Wei, Ying Tang, Lijun Zhang, Weihua Sun, Yong Du

Publisher page

Abstract

By linking to the thermodynamic and atomic mobility databases in Al alloys well established in our research group, the microstructure evolution in industrial A2214 alloy (Al-4.5Cu-0.5Mg-1.0Si, in wt pct) during solidification process was studied by means of two-dimensional phase-field simulation via MICRostructure Evolution Simulation Software in the framework of the multi-phase-field formalism. The thermophysical parameters including interfacial energies and interfacial mobilities were carefully chosen for reproducing the experimental features. The solidification sequence due to the present phase-field simulation conforms to both equilibrium calculation and Scheil simulation. The predicted microstructure reproduces the experimental data very well. These facts indicate that a quantitative phase-field simulation was achieved in the present work. Moreover, the mechanisms of characteristic patterns and microstructure formation were revealed with the aid of the phase-field simulation. In addition, the effect of cooling rate on the secondary dendrite arm spacing and microsegregation was also investigated through comprehensive comparison with the experimental data.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (54)

Show source-provided references
1. W.S. Miller, L. Zhuang, J. Bottema, A.J. Wittebrood and P. De Smet: Mater. Sci. Eng. A, 2000, vol. 280, pp. 37-49.10.1016/S0921-5093(99)00653-X ↗
2. L. Wang, M. Makhlouf and D. Apelian: Int. J. Mater. Rev., 1995, vol. 40, pp. 221-238.10.1179/imr.1995.40.6.221 ↗
3. A.L. Dons, G. Heiberg, J. Voje, J.S. Maeland, J.O. Loland and A. Prestmo: Mater. Sci. Eng. A, 2005, vol. 413-414, pp. 561-566.10.1016/j.msea.2005.09.053 ↗
4. C.R. Hutchinson and S.P. Ringer: Metall. Mater. Trans. A, 2000, vol. 31, pp. 2721-2733.10.1007/BF02830331 ↗
5. M. Nakai and T. Eto: Mater: Sci. Eng. A, 2000, vol. 285, pp. 62-68.10.1016/S0921-5093(00)00667-5 ↗
6. A. Karma and W.J. Rappel: Phys. Rev. E, 1998, vol. 57, pp. 4323-4349.10.1103/PhysRevE.57.4323 ↗
7. M. Rappaz and M. Rettenmayr: Curr. Opin. Solid State Mater. Sci., 1998, vol. 3, pp. 275-282.10.1016/S1359-0286(98)80103-4 ↗
8. M. Rettenmayr and H.E. Exner: Welding and Advanced Solidification Processes-VIII, 1998, pp. 171–78.
9. W.J. Boettinger, J.A. Warren, C. Beckermann and A. Karma: Annu. Rev. Mater. Res., 2002, vol. 32, pp. 163-94.10.1146/annurev.matsci.32.101901.155803 ↗
10. M. Plapp: J. Cryst. Growth, 2007, vol. 303, pp. 49-57.10.1016/j.jcrysgro.2006.12.064 ↗
11. I. Steinbach: JOM, 2013, vol. 65, pp. 1096-1102.10.1007/s11837-013-0681-5 ↗
12. I. Steinbach, F. Pezzolla, B. Nestler and M. SeeBelberg: Physica, 1996, vol. 94D, pp. 135-147.
13. MICRESS@: The MICRostructure Evolution Simulation Software. http://www.micress.de. Accessed 15 April 2015.
14. Thermo Calc Software: http://www.thermocalc.com. Accessed 15 April 2015.
15. X. Yan, S. Chen, F. Xie and Y.A. Chang: Acta Mater., 2002, vol. 50, pp. 2199-2207.10.1016/S1359-6454(01)00431-1 ↗
16. I. Steinbach: Model. Simul. Mater. Sci. Eng., 2009, vol. 17,pp. 073001.10.1088/0965-0393/17/7/073001 ↗
17. J. Eiken, B. Bottger and I. Steinbach: Phys. Rev. E, 2006, vol. 73, pp. 066122.10.1103/PhysRevE.73.066122 ↗
18. R.F. Almgren: J. Appl. Math, 1999, vol. 59, pp. 2086-2107.
19. A. Karma, W.-J.Rappel: Phys. Rev. E, 1996, vol. 53, pp. R3017-R3020.10.1103/PhysRevE.53.R3017 ↗
20. A.M. Mullis, J. Rosama and P.K. Jimack: J. Cryst. Growth, 2010, vol. 312, pp. 1891-1897.10.1016/j.jcrysgro.2010.03.009 ↗
21. A. Karma: Phys. Rev. Lett., 2001, vol. 87, pp. 115701.10.1103/PhysRevLett.87.115701 ↗
22. S.G. Kim: Acta Mater., 2007, vol. 55, pp. 4391-4399.10.1016/j.actamat.2007.04.004 ↗
23. A. Gopinath, R.C. Armstrong and R.A. Brown: J. Cryst. Growth, 2006, vol. 291, pp. 272-289.10.1016/j.jcrysgro.2006.03.001 ↗
24. M. Ohno and K. Matsuura: Phys. Rev. E, 2009, vol. 79, pp. 031603.10.1103/PhysRevE.79.031603 ↗
25. S.Y. Pan and M.F. Zhu: IOP Conf. Ser.: Mater. Sci. Eng., 2012, vol.33, pp. 012096.10.1088/1757-899X/33/1/012096 ↗
26. A. Carre, B. Bottger and A. Apel: J. Cryst. Growth, 2013, vol. 380, pp. 5-13.10.1016/j.jcrysgro.2013.05.032 ↗
27. G. Boussinot and E.A. Brener: Phys. Rev. E, 2013, vol. 88, pp. 022406.10.1103/PhysRevE.88.022406 ↗
28. A. Fang and Y. Mi: Phys. Rev. E, 2013, vol. 87, pp. 012402.10.1103/PhysRevE.87.012402 ↗
29. Y. Du, S. Liu, L. Zhang, H. Xu, D. Zhao and A. Wang: CALPHAD, 2011, vol. 35, pp. 427-445.10.1016/j.calphad.2011.06.007 ↗
30. O. Tougait and H. Noël: Intermetallics, 2004, vol. 12, pp.219-223.10.1016/j.intermet.2003.09.012 ↗
31. A.J. Bradley and P. Jones: J. Inst. Met., 1933, vol. 625, pp. 131-162.
32. M.E. Straumanis and E.Z. Aka: J. Appl. Phys., 1952, vol. 23, pp. 330-334.10.1063/1.1702202 ↗
33. D.J. Chakrabarti and D.E. Laughlin: Prog. Mater. Sci., 2004, vol. 49, pp. 389-410.10.1016/S0079-6425(03)00031-8 ↗
34. L. Arnberg and B. Aurivillius: Acta Chem. Scand. A, 1980, vol. 34, pp. 1-5.10.3891/acta.chem.scand.34a-0001 ↗
35. J. Lacaze, G. Lesoult, O. Relave, I. Ansara and J.P. Riquet: Z. Metallkd, 1987, vol. 78, pp. 141-150.
36. D.A. Petrov: Zh. Fiz. Khim., 1937, vol. 9, pp. 522-527.
37. D.A. Petrov: Acta Phys. Chim. URSS, 1937, vol. 6, pp. 505-512.
38. R. Yassar, D. Field and H. Weiland: Scr. Mater., 2005, vol. 53, pp. 299-303.10.1016/j.scriptamat.2005.04.013 ↗
39. L.F. Mondolfo: Aluminum Alloys: Structure and Properties, Butterworths, Boston, 1976.
40. G. Phragmen: J. Inst. Met., 1950, vol. 77, pp. 489-552.
41. R. Li, R. Li, Y. Zhao, L. He, C. Li, H. Guan and Z. Hu: Mater. Lett., 2004, vol. 58, pp. 2096-2101.10.1016/j.matlet.2003.12.027 ↗
42. C. Wolverton: Acta Mater., 2001, vol. 49, pp. 3129–3142.10.1016/S1359-6454(01)00229-4 ↗
43. K. Chang, S. Liu, D. Zhao, Y. Du, L. Zhou and L. Chen: Therm. Acta, 2011, vol. 512, pp. 258-267.10.1016/j.tca.2010.11.009 ↗
44. Y. Du, L. Zhang, S. Cui, D. Zhao, D. Liu, W. Zhan, W. Sun and W. Jie: Sci China Tech. Sci., 2012, vol. 55, pp. 306-327.10.1007/s11431-011-4692-6 ↗
45. L. Zhang, Y. Du, I. Steinbach, Q. Chen and B. Huang: Acta Mater., 2010, vol. 58, pp.3664-3675.10.1016/j.actamat.2010.03.002 ↗
46. L. Zhang, D. Liu, W. Zhang, S. Wang, Y. Tang, N. Ta, M. Wei and Y. Du: Mater. Sci. Forum, 2014, vol. 794-796, pp. 611-616.10.4028/www.scientific.net/MSF.794-796.611 ↗
47. M. Gunduz and J.D. Hunt: Acta Mater., 1985, vol. 33, pp. 1651-1672.10.1016/0001-6160(85)90161-0 ↗
48. N. Marasli and J.D. Hunt: Acta Mater., 1996, vol. 44, pp. 1085-1096.10.1016/1359-6454(95)00227-8 ↗
49. H. Dai: Doctoral Dissertation of Shandong University, China, 2009.
50. J.D. Hunt: Solidification and casting of metals. London, The Metal Society, 1979.
51. W. Kurz and D.J. Fisher: Acta Mater., 1981, vol. 29, pp. 11-20.10.1016/0001-6160(81)90082-1 ↗
52. M. Ganesan, D. Dye, and P.D. Lee: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2191-2204.10.1007/s11661-005-0338-2 ↗
53. J. Lacaze, J Eiken and A. Hazotte: IOP Conf. Series: Materials Science and Engineering, 2012, vol. 33, pp. 1-8.10.1088/1757-899X/33/1/012062 ↗
54. K. Graetz, J. Eiken and R. Schmid-Fetzer: Int. J. Mater. Res., 2014, vol. 105, pp. 130-138.10.3139/146.111008 ↗