journal article·2013-03

Morphology and Growth Kinetics of Straight and Kinked Tin Whiskers

Donald Susan, Joseph Michael, Richard P. Grant, Bonnie McKenzie, W. Graham Yelton

Publisher page

Abstract

Time-lapse SEM studies of Sn whiskers were conducted to estimate growth kinetics and document whisker morphologies. For straight whiskers, growth rates of 3 to 4 microns per day were measured at room temperature. Two types of kinked whiskers were observed. For Type A kinks, the original growth segment spatial orientation remains unchanged, there are no other changes in morphology or diameter, and growth continues. For Type B kinks, the spatial orientation of the original segment changes and it appears that the whisker bends over. Whiskers with Type B kinks show changes in morphology and diameter at the base, indicating grain boundary motion in the film, which eliminates the conditions suitable for long-term whisker growth. To estimate the errors in the whisker growth measurements, a technique is presented to correct for SEM projection effects. With this technique, the actual growth angles and lengths of a large number of whiskers were collected. It was found that most whiskers grow at moderate or shallow angles with respect to the surface; few straight whiskers grow nearly normal to the surface. In addition, there is no simple correlation between growth angles and lengths for whiskers observed over an approximate 2-year period.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electronic Packaging and Soldering Technologies · Copper Interconnects and Reliability · Semiconductor materials and devices

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. NASA Goddard Space Flight Center Tin Whisker Homepage, website http://nepp.nasa.gov/whisker/.
2. D.F. Susan, J.R. Michael, R.P. Grant, and W.G. Yelton: Microsc. Microanal., 2010, vol. 16, Suppl. 2, pp. 792–93.10.1017/S1431927610054164 ↗
3. J.R. Michael, B.B. McKenzie, and D.F. Susan: Microsc. Microanal., 2011, vol. 17, Suppl. 2, pp. 392–93.10.1017/S1431927611002832 ↗
4. N. Jadhav, E. Buchovecky, E. Chason, and A. Bower: JOM, 2010, vol. 62, pp. 30–37.10.1007/s11837-010-0105-8 ↗
5. K.N. Tu and J.C.M. Li: Mater. Sci. Eng. A, 2005, vol. A409, pp. 131–39.
6. L. Reinbold, N. Jadhav, E. Chason, and K.S. Kumar: J. Mater. Res., 2009, vol. 24, pp. 3583–89.10.1557/jmr.2009.0431 ↗
7. G.S. Baker: Acta Met., 1957, vol. 5, pp. 353–57.10.1016/0001-6160(57)90001-9 ↗
8. N. Furuta: Jpn. J. Appl. Phys., 1965, vol. 4, pp. 155–56.10.1143/JJAP.4.155 ↗
9. P.W. Levy and O.F. Kammerer: J. Appl. Phys., 1955, vol. 26, pp. 1182–83.10.1063/1.1722177 ↗
10. J.B. Lebret and M.G. Norton: J. Mater. Res., 2003, vol. 18, pp. 585–93.10.1557/JMR.2003.0076 ↗
11. J.W. Osenbach, J.M. DeLucca, B.D. Potteiger, A. Amin, and F.A. Baiocchi: J. Mater. Sci: Mater. Electron, 2007, vol. 18, pp. 283–305.10.1007/s10854-006-9030-6 ↗
12. B. Jiang and A.-P. Xian: Philos. Mag. Lett., 2006, vol. 86, pp. 521–27.10.1080/09500830600908996 ↗
13. P. Sarobol, A.E. Pedigo, P. Su, J.E. Blendell, and C.A. Handwerker: IEEE Trans. Elect. Pack. Manuf., 2010, vol. 33, pp. 159–64.10.1109/TEPM.2010.2046172 ↗
14. W.J. Boettinger, C.E. Johnson, L.A. Bendersky, K.-W. Moon, M.E. Williams, and G.R. Stafford: Acta Mater., 2005, vol. 53, pp. 5033–50.10.1016/j.actamat.2005.07.016 ↗
15. G.T. Galyon and L. Palmer: IEEE Trans. Elect. Pack. Manuf., 2005, vol. 28, pp. 17–30.10.1109/TEPM.2005.847443 ↗
16. T. Frolov, W.J. Boettinger, and Y. Mishin: Acta Mater., 2010, vol. 58, pp. 5471–80.10.1016/j.actamat.2010.06.023 ↗
17. B.-Z. Lee and D.N. Lee: Acta Mater., 1998, vol. 46, pp. 3701–14.10.1016/S1359-6454(98)00045-7 ↗
18. L. Panashchenko and M. Osterman: IEEE Elect. Comp. Tech. Conf., 2009, pp. 1037–43.10.1109/ECTC.2009.5074139 ↗
19. L. Panashchenko: M.S. Thesis, Univ. Maryland, 2009.
20. J.I. Goldstein, D.E. Newbury, P. Echlin, D.C. Joy, A.D. Romig, C.E. Lyman, C. Fiori, and E. Lifshin: Scanning Electron Microscopy and X-Ray Microanalysis, 2nd ed., Plenum Press, New York, 1992, pp. 260–267.10.1007/978-1-4613-0491-3 ↗
21. JESD22-A121A, JEDEC Standard No. 22-A121A, “A Test Method for Measuring Whisker Growth on Tin and Tin Alloy Surface Finishes”, 2008, JEDEC Solid State Technology Association.
22. S. Meschter, P. Snugovsky, J. Kennedy, S. McKeown, J. Keeping, and E. Kosiba: 5th Int. Symp. on Tin Whiskers, 2011, CALCE and Univ. of Maryland, College Park.
23. W.J.Choi, T.Y. Lee, K.N. Tu, N. Tamura, R.S. Celestre, A.A. MacDowell, Y.Y. Bong, and L. Nguyen: Acta Mater., 2003, vol. 51, pp. 6253–61.10.1016/S1359-6454(03)00448-8 ↗
24. P.T. Vianco and J.R. Rejent: J. Elect. Mater., 2009, vol. 38, pp. 1815–25.10.1007/s11664-009-0879-z ↗
25. P.T. Vianco and J.R. Rejent: J. Elect. Mater., 2009, vol. 38, pp. 1826–37.10.1007/s11664-009-0882-4 ↗
26. E.J. Buchovecky, N. Du, and A.F. Bower: Appl. Phys. Lett., 2009, vol. 94, p. 191904.10.1063/1.3136865 ↗
27. M.S. Sellers, A.J. Schultz, C. Basaran, and D.A. Kofke: Phys. Rev. B, 2010, vol. 81, p. 134111.10.1103/PhysRevB.81.134111 ↗