A Benchmark Study on Casting Residual Stress
Source abstract
Abstract
A benchmark study was undertaken for casting residual stress measurements through neutron diffraction, which was subsequently used to validate the accuracy of simulation prediction. The “stress lattice” specimen geometry was designed such that subsequent castings would generate adequate residual stresses during solidification and cooling of ductile cast iron, without any cracks. The residual stresses in the cast specimen were measured using neutron diffraction. Considering the difficulty in accessing the neutron diffraction facility, these measurements can be considered as a benchmark for casting simulation validations. Simulations were performed using the identical specimen geometry and casting conditions for predictions of residual stresses. The simulation predictions were found to agree well with the experimentally measured residual stresses. The experimentally validated model can be subsequently used to predict residual stresses in different cast components. This enables incorporation of the residual stresses at the design phase along with external loads for accurate predictions of fatigue and fracture performance of the cast components.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (24)
Show source-provided references
1. United States Code of Federal Regulations 40 CFR 89 (7–1–10 Edition), pp. 39–171.
2. M.N. James, D.J. Hughes, Z. Chen, H. Lombard, D.G. Hattingh, D. Asquith, J.R. Yates, and P.J. Webster: Eng. Fail. Anal., 2007, vol. 14, pp. pp. 384–95.10.1016/j.engfailanal.2006.02.011 ↗
3. ASTM E837, ASTM International, West Conshohocken, PA, 2008.
4. I.C. Noyan and J.B. Cohen: Residual Stress, Measurement by Diffraction and Interpretation, Springer-Verlag, New York, NY, 1987, pp. 25–27, 117–63.10.1007/978-1-4613-9570-6_5 ↗
5. M.T. Hutchings, P.J. Withers, T.M. Holden, and T. Lorentzen: Introduction to the Characterization of Residual Stress by Neutron Diffraction, CRC Press, Boca Raton, FL, 2005, pp. 34–40.10.1201/9780203402818 ↗
6. E. Gustafsson, M. Hofwing, and N. Strömberg: J. Mater. Proc. Technol., 2009, vol. 209, pp. 4320–28.10.1016/j.jmatprotec.2008.11.025 ↗
7. A. Jacot, D. Maijer, and S. Cockcroft: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1201–11.
8. S.A. Dutler, E.M. Johnson, T.R. Watkins, and J.E. Schmidlin: 2011 Proc. 115th Metalcasting Congress CD ROM, Paper No. 11-079, American Foundry Society, Schaumburg, IL, 2011, pp. 1–6.
9. ASTM E112, ASTM International, West Conshohocken, PA, 2010.
10. J.A. James, J.R. Santisteban, L. Edwards, and M.R. Daymond: Physica B, 2004, vol. 350, pp. E743–E746.10.1016/j.physb.2004.03.194 ↗
11. J.A. James and L. Edwards: Nucl. Instr. Meth. A, 2007, vol. 571, pp. 709–18.10.1016/j.nima.2006.11.033 ↗
12. X.-L. Wang, S. Spooner, and C.R. Hubbard: J. Appl. Cryst., 1998, vol. 31, pp. 52–59.10.1107/S0021889897008261 ↗
13. D.-Q. Wang, X.-L. Wang, and C.R. Hubbard: 6th Int. Conf. on Residual Stresses, IOM Communications, London, 2000, vol. 2, pp. 1255–63.
14. J. Bunn, J. Schmidlin, and C.R. Hubbard: Report No. ORNL/TM-2008/159, Oak Ridge National Laboratory, Oak Ridge, TN, 2008.
15. W.B. Bailey: Master’s Thesis, University of South Carolina, Columbia, SC, 2005.
16. F. Tang and C.R. Hubbard: Report No. ORNL/TM-2006/541, Oak Ridge National Laboratory, Oak Ridge, TN, 2006.
17. K. An and C.R. Hubbard: Report No. ORNL/TM-2005/530, Oak Ridge National Laboratory, Oak Ridge, TN, 2006.
18. K. An, M.C. Wright and C.R. Hubbard: ORNL/TM-2005/531, Oak Ridge National Laboratory, Oak Ridge, TN, 2006.
19. K. An and C.R. Hubbard: Report No. ORNL/TM-2005/530, Oak Ridge National Laboratory, Oak Ridge, TN, 2006.
20. M. Popovici, A.D. Stoica, C.R. Hubbard, S. Spooner, H.J. Prask, T.H. Gnaeupel-Herold, P.M. Gehring, and R.W. Erwin: Neutron Optics, Proc. SPIE, 2001, vol. 4509, pp. 21–32.10.1117/12.448073 ↗
21. H.T. Angus: Cast Iron: Physical and Engineering Properties, Butterworth & Co. Ltd., London, 1976, pp. 34–140, 253–86.10.1016/B978-0-408-70933-0.50007-4 ↗
22. Fundamentals of Numerical Modelling of Casting Processes, J. Hattel, ed., Polyteknisk Forlag, Kgs. Lyngby, Denmark, 2005, pp. 356–69.
23. ASM Specialty Handbook: Cast Irons, J.R. Davis, ed., ASM INTERNATIONAL, Materials Park, OH, 1996, pp. 54–79, 144, 409–36.
24. J.C. Strum and G. Busch: Cast Iron—A Predictable Material, World Foundry Congr., Hangzhou, China, unpublished research, Oct. 16–20, 2010.