journal article·2013-04

Effect of Boron on the Isothermal Bainite Transformation

Taejin Song, Bruno Charles De Cooman

Publisher page

Abstract

The role of Boron on the isothermal bainitic transformation in low-C, lean-alloyed steel was investigated. B clearly affected both the transformation kinetics and the morphology of isothermally transformed bainite. The effect of B was more noticeable in the high-temperature range of the bainitic transformation. The microstructure of bainite formed at 773 K (500 °C) consisted of a bainitic ferrite matrix and the martensite/austenite constituent. While the martensite/austenite constituent had an elongated morphology in B-free steel, the martensite/austenite constituents in the B-added steel had a granular morphology. Two types of bainite unit nucleation were considered: the initial nuclei and the nuclei formed on previously formed units. Electron backscattered diffraction (EBSD) analysis showed that the initial bainitic ferrite nuclei were formed at austenite grain boundaries with a Kurdjumov-Sachs (K-S) crystallographic orientation relationship with respect to one of the neighboring austenite grains, revealing the importance of interfacial energy reduction in the nucleation stage. The nuclei of the bainite transformation in the B-added steel were confined to the austenite grain interior, and the bainitic ferrite nuclei had crystallographic orientations limited to K-S variants within the same Bain variant. The characteristic bainite microstructure in B-added steel is due to the inhibition of the bainitic ferrite nucleation at austenite grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (58)

Show source-provided references
1. X. M. Wang, X. L. He: ISIJ Int., 2002, vol. 42, pp. S38-S46.10.2355/isijinternational.42.Suppl_S38 ↗
2. G. Melloy, P. Summon, P. Podgursky: Metall. Trans., 1973, vol. 4, pp. 2279-2289.10.1007/BF02669367 ↗
3. Y. Tomita, K. Okabayashi: Metall. Trans. A, 1985, vol. 16, pp. 73-82.10.1007/BF02656714 ↗
4. T. Song, J. Kwak, B. C. De Cooman (2012) Metallurgical and Materials Transactions A 43A:263-280.10.1007/s11661-011-0791-z ↗
5. C. Mesplont, S. Vandeputte, B. C. D. Cooman: Zeitschrift fur Metallkunde, 2002, vol. 93, pp. 1108-1118.10.3139/146.021108 ↗
6. S. Khare, K. Lee, H. K. D. H. Bhadeshia: International Journal of Materials Research, 2009, vol. 100, pp. 1513-1520.10.3139/146.110222 ↗
7. K. Zhu, C. Oberbillig, C. i. Musik, D. Loison, T. Iung: Materials Science and Engineering: A, 2011, vol. 528, pp. 4222-4231.10.1016/j.msea.2011.02.022 ↗
8. C. A. Siebert, D. V. Doane, D. H. Breen, The Hardenability of Steels - Concepts, Metallurgical Influence and Industrial Applications, American Society for Metals, Metla Pak, OH, 1977, pp. 72-129.
9. D. T. Llewellyn: Ironmaking and Steelmaking, 1993, vol. 20, pp. 338-343.
10. W. Cias: Metall. Trans., 1973, vol. 4, pp. 603-614.10.1007/BF02648716 ↗
11. H. Asahi: ISIJ International, 2002, vol. 42, pp. 1150-1155.10.2355/isijinternational.42.1150 ↗
12. T. Hara, H. Asahi, R. Uemori, H. Tamehiro: ISIJ International, 2004, vol. 44, pp. 1431-1440.10.2355/isijinternational.44.1431 ↗
13. H. K. D. H. Bhadeshia, Bainite in Steels: Transformation, Microstructure and Properties, IOM Communications Ltd., London, 2001. pp.129-188.
14. Y. Shen, S. Hansen: Metallurgical and Materials Transactions A, 1997, vol. 28, pp. 2027-2035.10.1007/s11661-997-0159-6 ↗
15. M. G. H. Wells: Acta Metallurgica, 1964, vol. 12, pp. 389-399.10.1016/0001-6160(64)90009-4 ↗
16. V. Biss, R. Cryderman: Metall. Trans. 1971, vol. 2, pp. 2267-2276.10.1007/BF02917559 ↗
17. S. W. Thompson, D. J. Colvin, G. Krauss: Metall. Trans. A, 1990, vol. 21, pp. 1493-1507.10.1007/BF02672564 ↗
18. H. Kawata, K. Sakamoto, T. Moritani, S. Morito, T. Furuhara, T. Maki: Materials Science and Engineering: A, 2006, vol. 438-440, pp. 140-144.10.1016/j.msea.2006.02.175 ↗
19. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, T. Maki: Acta Materialia, 2003, vol. 51, pp. 1789-1799.10.1016/S1359-6454(02)00577-3 ↗
20. T. Furuhara, H. Kawata, S. Morito, G. Miyamoto, T. Maki: Metallurgical and Materials Transactions A, 2008, vol. 39, pp. 1003-1013.10.1007/s11661-008-9510-9 ↗
21. H. K. D. H. Bhadeshia, Geometry of Crystals, the Institute of Materials, London, 2001. pp.12-24.
22. M. Déchamps, F. Baribier, A. Marrouche: Acta Metallurgica, 1987, vol. 35, pp. 101-107.10.1016/0001-6160(87)90217-3 ↗
23. H. K. D. H. Bhadeshia, D. V. Edmonds: Acta Metallurgica, 1980, vol. 28, pp. 1265-1273.10.1016/0001-6160(80)90082-6 ↗
24. G. Zhang, T. Takeuchi, M. Enomoto, Y. Adachi: Metallurgical and Materials Transactions A, 2011, vol. 42, pp. 1597-1608.10.1007/s11661-010-0554-2 ↗
25. H. K. D. H. Bhadeshia: Acta Metallurgica, 1981, vol. 29, pp. 1117-1130.10.1016/0001-6160(81)90063-8 ↗
26. T. Nagano, M. Enomoto: Metallurgical and Materials Transactions A, 2006, vol. 37, pp. 929-937.10.1007/s11661-006-0066-2 ↗
27. B. C. De Cooman, J. G. Speer, Fundamentals of Steel Product Physical Metallurgy, AIST, Warrendale, 2011. pp.135-204.
28. J. M. Howe, Interfaces in materials, Wiley-Interscience, New York, 1997. pp.307-376.
29. G. Olson, M. Cohen: Metall. Trans. A, 1976, vol. 7, pp. 1897-1904.
30. G. Olson, M. Cohen: Metall. Trans. A, 1976, vol. 7, pp. 1905-1914.
31. S. Kajiwara: Metall. Trans. A, 1986, vol. 17, pp. 1693-1702.10.1007/BF02817268 ↗
32. K. Tsuzaki, N. Harada, T. Maki: J. Phys. IV France, 1995, vol. 05, pp. C8-167 - C168-172.
33. R. W. Balluffi, Y. Komem, T. Schober: Surface Science, 1972, vol. 31, pp. 68-103.10.1016/0039-6028(72)90254-3 ↗
34. P. R. Howell, A. R. Jones, B. Ralph: Journal of Materials Science, 1975, vol. 10, pp. 1351-1359.10.1007/BF00540825 ↗
35. W. A. T. Clark, D. A. Smith: Philosophical Magazine A, 1978, vol. 38, pp. 367-385.10.1080/01418617808239242 ↗
36. K. Nakai, T. Sakamoto, R. Asakura, Y. Kotani, N. Isomura, S. Kobayashi, M. Hamada, Y. Komizo: ISIJ Int., 2011, vol. 51, pp. 274-279.10.2355/isijinternational.51.274 ↗
37. H. Landheer, S. E. Offerman, R. H. Petrov, L. A. I. Kestens: Acta Mater., 2009, vol. 57, pp. 1486-1496.10.1016/j.actamat.2008.11.034 ↗
38. M. Militzer, E. Hawbolt, T. Ray Meadowcroft, A. Giumelli (1996) Metallurgical and Materials Transactions A 27:3399-3409.10.1007/BF02595433 ↗
39. J. Moon, S. Kim, J. Lee, C. Lee: Scripta Mater., 2007, vol. 56, pp. 1083-1086.10.1016/j.scriptamat.2007.02.025 ↗
40. F. J. Humphreys, M. Hatherly, Recystallization and Related Annealing Phenomena, Pergamon, Oxford, 1995. pp.85-126.
41. L. Karlsson, H. Nordén: Acta Metall., 1988, vol. 36, pp. 13-24.10.1016/0001-6160(88)90024-7 ↗
42. T.-K. Lee, H. J. Kim, B. Y. Kang, S. K. Hwang: ISIJ Int., 2000, vol. 40, pp. 1260-1268.10.2355/isijinternational.40.1260 ↗
43. L. Cheng, K. M. Wu: Acta Mater., 2009, vol. 57, pp. 3754-3762.10.1016/j.actamat.2009.04.045 ↗
44. A. Sugden, H. Bhadeshia: Metall. Trans. A, 1989, vol. 20, pp. 1811-1818.10.1007/BF02663212 ↗
45. J. Dowling, J. Corbett, H. Kerr: Metall. Trans. A, 1986, vol. 17, pp. 1611-1623.10.1007/BF02650098 ↗
46. Y. Tomita, N. Saito, T. Tsuzuki, Y. Tokunaga, K. Okamoto: ISIJ International, 1994, vol. 34, pp. 829-835.10.2355/isijinternational.34.829 ↗
47. J. H. Shim, Y. J. Oh, J. Y. Suh, Y. W. Cho, J. D. Shim, J. S. Byun, D. N. Lee: Acta Materialia, 2001, vol. 49, pp. 2115-2122.10.1016/S1359-6454(01)00134-3 ↗
48. H. Matsuda, H. K. D. H. Bhadeshia (2004) Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences 460:1707-1722.10.1098/rspa.2003.1225 ↗
49. A. Matsuzaki, H. K. D. H. Bhadeshia, H. Harada: Acta Metallurgica et Materialia, 1994, vol. 42, pp. 1081-1090.10.1016/0956-7151(94)90125-2 ↗
50. P. H. Shipway, H. K. D. H. Bhadeshia: Materials Science and Engineering A, 1995, vol. 201, pp. 143-149.10.1016/0921-5093(95)09769-4 ↗
51. W. Gong, Y. Tomota, M. S. Koo, Y. Adachi: Scripta Materialia, 2010, vol. 63, pp. 819-822.10.1016/j.scriptamat.2010.06.024 ↗
52. S. Morito, X. Huang, T. Furuhara, T. Maki, N. Hansen: Acta Materialia, 2006, vol. 54, pp. 5323-5331.10.1016/j.actamat.2006.07.009 ↗
53. H. K. D. H. Bhadeshia, D. V. Edmonds: Metall. Trans. A, 1979, vol. 10, pp. 895-907.10.1007/BF02658309 ↗
54. S. Chatterjee, H.-S. Wang, J. R. Yang, H. K. D. H. Bhadeshia (2006) Materials Science and Technology 22:641–44.10.1179/174328406X86128 ↗
55. T. Moritani, N. Miyajima, T. Furuhara, T. Maki: Scripta Materialia, 2002, vol. 47, pp. 193-199.10.1016/S1359-6462(02)00128-8 ↗
56. H. K. D. H. Bhadeshia: Materials Science and Engineering A, 1999, vol. 273-275, pp. 58-66.10.1016/S0921-5093(99)00289-0 ↗
57. B. Sandvik, C. Wayman: Metall. Trans. A, 1983, vol. 14, pp. 809-822.10.1007/BF02644284 ↗
58. R. N. Caron, G. Krauss: Metall. Trans., 1972, vol. 3, pp. 2381-2389.10.1007/BF02647041 ↗