Variability of large-crack fatigue-crack-growth thresholds in structural alloys
Source abstract
Abstract
The fatigue threshold of large cracks is known to show substantial variations due to microstructural variability in structural alloys. The ΔK th variations are dependent on the stress ratio (R); they are extremely large at low R ratios, e.g., R<0.5, but are drastically reduced at high R ratios (R>0.8). The origins of these large variations due to intrinsic and extrinsic mechanisms are examined by theoretical analyses. First, an intrinsic fatigue crack growth (FCG) threshold model is developed for structural alloys by considering the cyclic slip process at the crack tip. Second, the effects of extrinsic mechanisms such as residual plastic stretch, crack deflection, fracture-surface roughness, and oxide wedging are considered both individually and concurrently in order to delineate their relative contributions to threshold variability. The theoretical results indicate that the intrinsic threshold depends on the elastic properties, magnitude of the Burgers vector, yield stress, and Taylor factor (i.e., texture), but is independent of the R ratio or the maximum applied stress intensity factor, K max. The large variability of ΔK th at low R ratios and their corresponding dependence on K max appear to arise from various crack closure mechanisms. Applications of the threshold models to structural alloys show good agreement between theory and experimental data from the literature for steels, Ti, Al, Ni, Cu, Nb, and Mo alloys.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Fatigue and fracture mechanics · High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (100+)
Show source-provided references
1. J. Lankford and S.J. Hudak, Jr.: Int. J. Fatigue, 1987, vol. 19, pp. 87–93.10.1016/0142-1123(87)90049-1 ↗
2. J.M. Larsen, B.D. Worth, C.G. Annis, Jr., and F.K. Haake: Int. J. Fracture, 1996, vol. 80, pp. 237–55.10.1007/BF00012671 ↗
3. M.E. Fine and R.O. Ritchie: in Fatigue and Microstructure, M. Meshii, ed., ASM, Metals Park, OH, 1979, pp. 245–78.
4. R.O. Ritchie and Y. Murakami: Comprehensive Structural Integrity, Elsevier, Boston, MA, 2003, vol. 4.
5. Fatigue Thresholds, J. Bäcklund, A.F. Blom, and C.J. Beevers, eds., EMAS, West Midlands, United Kingdom, 1982, vols. I and II.
6. Fatigue Crack Growth Threshold Concepts, D.L. Davidson and S. Suresh, eds., TMS, Warrendale, PA, 1983.
7. Mechanics of Fatigue Crack Closure, ASTM STP-982, J.C. Newman and W. Elber, eds., ASTM, Philadelphia, PA, 1988.
8. Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP-1372, J.C. Newman and R.S. Piascik, eds., ASTM, West Conshohocken, PA, 2000.
9. R.K. Liaw, T.R. Leax, and W.A. Logsdon: Acta Metall., 1983, vol. 31, pp. 1581–87.10.1016/0001-6160(83)90155-4 ↗
10. R.O. Ritchie and W. Yu: in Small Fatigue Cracks, R.O. Ritchie and J. Lankford, eds., TMS, Warrendale, PA, 1986, pp. 167–89.
11. W. Elber: Eng. Fract. Mech., 1970, vol. 2, pp. 37–45.10.1016/0013-7944(70)90028-7 ↗
12. J.C. Newman, Jr.: in Methods and Models for Predicting Fatigue Crack Growth under Random Loading, ASTM STP-748, J.B. Chang and C.M. Hudson, eds., ASTM, Philadelphia, PA, 1981, pp. 53–84.10.1520/STP28334S ↗
13. J.C. Newman, Jr.: Int. J. Fract., 1984, vol. 24, pp. R131–R135.10.1007/BF00032686 ↗
14. D.L. Davidson: in Mechanics of Fatigue Crack Closure, ASTM STP-982, J.C. Newman and W. Elber, eds., ASTM, Philadelphia, PA, 1988, pp. 44–61.10.1520/STP27200S ↗
15. D.L. Davidson: Eng. Fract. Mech., 1991, vol. 38, pp. 393–402.10.1016/0013-7944(91)90091-E ↗
16. R.C. McClung and D.L. Davidson: Eng. Fract. Mech., 1991, vol. 39, pp. 113–30.10.1016/0013-7944(91)90027-X ↗
17. R.C. McClung and D.L. Davidson: in Advances in Fatigue Crack Closure Measurement and Analysis: Second Volume, ASTM STP-1343, R.C. McClung and J.C. Newman, Jr., eds., ASTM, West Conshohocken, PA, 1999, pp. 106–27.
18. S. Suresh and R.O. Ritchie: in Fatigue Crack Growth Threshold Concepts, D.L. Davidson and S. Suresh, eds., TMS-AIME, Warrendale, PA, 1984, pp. 227–61.
19. S. Suresh: Metall. Trans. A, 1985, vol. 16A, pp. 249–60.10.1007/BF02816051 ↗
20. S. Suresh and R.O. Ritchie: Scripta Metall., 1983, vol. 17, pp. 575–80.10.1016/0036-9748(83)90357-5 ↗
21. S.J. Hudak, Jr. and R.A. Page: Corrosion, 1983, vol. 39, pp. 285–90.10.5006/1.3581914 ↗
22. G. Marci: Fatigue Fract. Eng. Mater. Struct., 1994, vol. 17, pp. 389–907.10.1111/j.1460-2695.1994.tb00819.x ↗
23. G. Marci: Int. J. Fatigue, 1994, vol. 16, pp. 409–12.10.1016/0142-1123(94)90454-5 ↗
24. S.W. Hopkins, C.A. Rau, G.R. Leverant, and Y. Yuen: Fatigue Crack Growth under Spectrum Loads, ASTM STP-595, ASTM, Philadelphia, PA, 1976, pp. 125–41.10.1520/STP33368S ↗
25. H. Döker and G. Marci: Int. J. Fatigue, 1983, vol. 5, pp. 187–91.10.1016/0142-1123(83)90039-7 ↗
26. B.L. Boyce and R.O. Ritchie: Eng. Fract. Mech., 2001, vol. 68, pp. 129–47.10.1016/S0013-7944(00)00099-0 ↗
27. L. Lawson, E.Y. Chen, and M. Meshii: Int. J. Fatigue, 1999, vol. 21, pp. S75–34.10.1016/S0142-1123(99)00053-5 ↗
28. D.L. Chen, B. Weiss, R. Stickler, and Z. Wang: J. Mater. Sci. Technol., 1997, vol. 18, pp. 1–14.
29. K. Tanaka and Y. Akinwa: Comprehensive Structural Integrity, R.O. Ritchie and Y. Murakami, eds., Elsevier, Boston, MA, 2003, vol. 4, pp. 165–90.10.1016/B0-08-043749-4/04032-5 ↗
30. S.J. Hudak, Jr. and D. L. Davidson: in Mechanics of Fatigue Crack Closure, ASTM STP-982, J.C. Newmann and W. Elber, eds., ASTM, Philadelphia, PA, 1988, pp. 121–38.
31. A.K. Vasudevan, K. Sadananda, and N. Louat: Mater. Sci. Eng., 1994, vol. A188, pp. 1–22.10.1016/0921-5093(94)90351-4 ↗
32. A.K. Vasudevan, K. Sadananda, and N. Louat: Scripta Metall., 1993, vol. 28, pp. 65–70.10.1016/0956-716X(93)90538-4 ↗
33. A.K. Vasudevan and K. Sadananda: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1221–34.10.1007/BF02670617 ↗
34. A.J. Wilkinson, S.G. Roberts, and P.B. Hirsch: Acta Mater., 1998, vol. 46, pp. 379–89.10.1016/S1359-6454(97)00290-5 ↗
35. F. Riemelmoser and R. Pippan: Fatigue ’96: Proc. 6th Int. Conf. on Fatigue and Fatigue Thresholds, G. Lutjering, and H. Nowack, eds., Pergamon Press, New York, NY, 1996, pp. 363–68.
36. F. Riemelmoser and R. Pippan: Fatigue Fract. Eng. Mater. Struct., 1997, vol. 20, pp. 1529–40.10.1111/j.1460-2695.1997.tb01508.x ↗
37. F. Riemelmoser and R. Pippan: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1357–60.
38. R. Pippan and F.O. Riemelmoser: Comprehensive Structural Integrity, R.O. Ritchie and Y. Murakami, eds., Elsevier, Boston, MA, 2003, vol. 4, pp. 191–208.10.1016/B0-08-043749-4/04035-0 ↗
39. Z. Shan and Y. Leng: Scripta Mater., 1997, vol. 36, pp. 137–43.10.1016/S1359-6462(96)00345-4 ↗
40. A.J. McEvily and R.O. Ritchie: Eng. Mater. Struct., 1998, vol. 21, pp. 847–55.10.1046/j.1460-2695.1998.00069.x ↗
41. G. Marci: in Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP-1372, J.C. Newman, Jr., and R.S. Piascik, eds., ASTM, West Conshohocken, PA, 2000, pp. 81–95.10.1520/STP13427S ↗
42. J. Weertman: in Mechanics of Fatigue, T. Mura, ed., ASME, New York, NY, 1981, AMD-vol. 47, pp. 11–19.
43. T. Mura and J. Weertman: in Fatigue Crack Growth Threshold Concepts, D.L. Davidson and S. Suresh, eds., TMS-AIME, Warrendale, PA, 1984, pp. 531–49.
44. K. Sadananda and P. Shahinian: Int. J. Fract., 1977, vol. 13, pp. 585–94.10.1007/BF00017294 ↗
45. V. Weiss and D.N. Lal: Metal. Trans., 1974, vol. 5, pp. 1946–49.10.1007/BF02644165 ↗
46. C. Yu and M. Yan: Fatigue Fract. Eng. Met. Struct., 1980, vol. 3, pp. 189–92.10.1111/j.1460-2695.1980.tb01113.x ↗
47. J. Lanteigne and J.-P. Bailon: Metall. Trans. A, 1981, vol. 12A, pp. 459–66.10.1007/BF02648543 ↗
48. D.L. Davidson: Acta Metall., 1984, vol. 32, pp. 707–14.10.1016/0001-6160(84)90144-5 ↗
49. D.L. Davidson and J. Lankford: Int. Mater. Rev., 1992, vol. 37, pp. 45–76.10.1179/imr.1992.37.1.45 ↗
50. J.P. Lucas and W.W. Gerberich: Fat. Eng. Mater. Struct., 1981, vol. 6, pp. 271–80.10.1111/j.1460-2695.1983.tb00342.x ↗
51. J.P. Lucas and W.W. Gerberich: Mater. Sci. Eng., 1981, vol. 51, pp. 203–212.10.1016/0025-5416(81)90196-8 ↗
52. J.R. Rice: ASTM STP-415, ASTM, Philadephia, PA, 1966, pp. 247–309.
53. M.J. Marcinkowski: Phys. Status Solidi, 1984, vol. 83, pp. 49–68.10.1002/pssa.2210830105 ↗
54. D.L. Holt: J. Appl. Phys., 1970, vol. 41, pp. 3197–201.10.1063/1.1659399 ↗
55. K. Katagiri, A. Omura, K. Koyanagi, J. Awatani, T. Shiraishi, and H. Kaneshiro: Metall. Trans. A, 1977, vol. 8A, pp. 1769–73.10.1007/BF02646881 ↗
56. K. Katagiri, J. Awatani, A. Omura, K. Koyanagi, and T. Shiraishi: in Fatigue Mechanisms, ASTM STP-675, J.T. Fong, ed., ASTM, Philadelphia, PA, 1979, pp. 106–28.10.1520/STP35886S ↗
57. D.L. Davidson, J. Lankford, T.R. Yokobori, and K. Sato: Int. J. Fract., 1976, vol. 12, pp. 579–85.10.1007/BF00034643 ↗
58. A.J. Wilkinson, J. Ahmede, and S.G. Roberts: Fatigue—David L. Davidson Symp., K.S. Chan, P.K. Liaw, R.S. Bellows, T. Zous, and W.O. Soboyejo, TMS, Warrendale, PA, 2002, pp. 17–29.
59. H. Mughrabi: Phys. Status Solidi (a), 1987, vol. 104, pp. 104–20.10.1002/pssa.2211040108 ↗
60. H. Mughrabi: Rev. Phys. Appl., 1988, vol. 23, pp. 367–79.10.1051/rphysap:01988002304036700 ↗
61. H. Mughrabi: Acta Metall., 1983, vol. 31, pp. 1367–79.10.1016/0001-6160(83)90007-X ↗
62. J. Polak: in Comprehensive Structural Integrity, R.O. Ritchie and Y. Murakami, eds., Elsevier, Boston, MA, 2003, vol. 4, pp. 1–39.
63. G.E. Beltz, J.R. Rice, C.F. Shin, and L. Xia: Acta Mater., 1996, vol. 44, pp. 3943–54.10.1016/S1359-6454(96)00047-X ↗
64. D.M. Lipkin and G.E. Beltz: Acta Mater., 1996, vol. 44, pp. 1287–91.10.1016/1359-6454(95)00300-2 ↗
65. D.S. Dudgale: J. Mech. Phys. Solids, 1960, vol. 8, pp. 100–08.10.1016/0022-5096(60)90013-2 ↗
66. D.L. Chen, B. Weiss, and R. Stickler: Eng. Fract. Mech., 1996, vol. 53, pp. 493–509.10.1016/0013-7944(95)00169-7 ↗
67. J.F. McCarver and R.O. Ritchie: Mater. Sci. Eng., 1982, vol. 55, pp. 63–67.10.1016/0025-5416(82)90084-2 ↗
68. J.E. King: Mater. Sci. Technol., 1987, vol. 3, pp. 750–64.10.1179/mst.1987.3.9.750 ↗
69. B. Weiss, R. Stickler, and A. Fathulla: in Small Fatigue Cracks, R.O. Ritchie and J. Landford, eds., TMS, Warrendale, PA, 1985, pp. 471–98.
70. J.K. Shang and R.O. Ritchie: Acta Metall., 1989, vol. 37, pp. 2267–78.10.1016/0001-6160(89)90154-5 ↗
71. S.C. Forth, J.C. Newman, Jr., and R.G. Forman: Int. J. Fatigue, 2003, vol. 25, pp. 9–15.10.1016/S0142-1123(02)00066-X ↗
72. J.J. Lewandoski, D. Padhi, and S. Solvyev: in Structural Intermetallics 2001, K.J. Henker, D.M. Dimiduk, H. Clemens, R. Darolia, H. Inui, J.M. Larsen, V.K. Sikka, M. Thomas, and J.D. Whittenberger, TMS, Warrendale, PA, 2001, pp. 371–80.
73. M. Lang, G.A. Hartman, and J.M. Larsen: Scripta Mater., 1998, vol. 38, pp. 1803–10.10.1016/S1359-6462(98)00120-1 ↗
74. Y.N. Lenets and T. Nicholas: Eng. Fract. Mech., 1998, vol. 60, pp. 187–20310.1016/S0013-7944(98)00010-1 ↗
75. G. Marci: Fatigue, 1994, vol. 16, pp. 409–12.10.1016/0142-1123(94)90454-5 ↗
76. S. Usami: Proc. Int. Conf. Fatigue Thresholds, Stockholm, 1981, vol. I, J. Bäcklund, A.F. Blom, and C.J. Beevers, eds., EMAS, West Midlands, U.K., pp. 205–38.
77. J.M. Larsen, B.D. Worth, S.J. Balsone, and J.W. Jones: Gamma Titanium Aluminides, Y.-W. Kim, R. Wagner, and M. Yamauchi, TMS, Warrendale, PA, 1995, pp. 821–34.
78. J.P. Campbell, J.J. Kruzic, Lillibridge, S. Venkateswara, K.T. Rao, and R.O. Ritchie: Scripta Mater., 1997, vol. 37 (5), pp. 707–12.10.1016/S1359-6462(97)00154-1 ↗
79. R. Gnanamoorthy, Y. Mutoh, K. Hayashi, and Y. Mizuhara: Scripta Metall. Mater., 1995, vol. 33 (6), pp. 907–12.10.1016/0956-716X(95)00296-8 ↗
80. Damage Tolerant Design Handbook, Purdue University, West Lafayette, IN, 1994, vol. 3, WL-TR-94-4054.
81. T.C. Lindley and C.E. Richards: Proc. Int. Conf. Fatigue Thresholds, Stockholm, 1981, vol. II, J. Bäcklund, A.F. Blom, and C.J. Beevers, eds., EMAS, West Midlands, U.K., pp. 1087–113.
82. C.J. Beevers: Proc. Int. Conf. Fatigue Thresholds, Stockholm, 1981, vol. I, J. Bäcklund, A.F. Blom, and C.J. Beevers, eds., EMAS, West Midlands, U.K., pp. 257–75.
83. P.E. Irving and C.J. Beevers: Metall. Trans., 1974, vol. 5, pp. 391–98.10.1007/BF02644106 ↗
84. R.J. Cooke and C.J. Beevers: Mater. Sci. Eng., 1974, vol. 13, pp. 201–10.10.1016/0025-5416(74)90191-8 ↗
85. R.J. Bucci, P.C. Paris, R.W. Hertzberg, R.A. Schmidt, and A.F. Anderson: ASTM STP-513, ASTM, Philadelphia, PA, 1972, pp. 125–40.
86. C.W. Brown and G.C. Smith: Proc. Int. Conf. Fatigue Thresholds, Stockholm, 1981, vol. 1, J. Bäcklund, A.F. Blom, and C.J. Beevers, eds., EMAS, West Midlands, U.K., pp. 329–43.
87. N.R. Moody and W.W. Gerberich: Met. Sci., 1980, vol. 14, pp. 95–100; W.W. Gerberick and N.R. Moody: in Fatigue Mechanisms, ASTM STP-675, J.-F. Fong, ed., ASTM, Philadelphia, PA, 1979, pp. 292-341.10.1016/0036-9748(80)90133-7 ↗
88. S.W. Smith and R.S. Piascik: in Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP-1372, J.C. Newman, Jr. and R.S. Piascik, eds., ASTM, West Conshohocken, PA, 2000, pp. 109–122; also H.O. Likens and R.R. Stephens: Fatigue Crack Growth Thresholds, Endurance Limits, and Design, ASTM STP-1372, J.C. Newman, Jr. and R.S. Piascik, eds., ASTM, West Conshohocken, PA, 2000, pp. 175–91.10.1520/STP13429S ↗
89. J.W. Sheldon, K.R. Bain, and J.K. Donald: Int. J. Fatigue, 1999, vol. 21, pp. 733–41.10.1016/S0142-1123(99)00037-7 ↗
90. M. Clavel and A. Pineau: Metall. Trans. A, 1978, vol. 9A, p. 471–80.10.1007/BF02646402 ↗
91. J. Barsom, E.J. Imhof, and S.T. Rolfe: Eng. Fract. Mech., 1971, vol. 2, pp. 301–06.10.1016/0013-7944(71)90016-6 ↗
92. R.B. Scarlin: Mater. Sci. Eng., 1977, vol. 30, pp. 55–64.10.1016/0025-5416(77)90079-9 ↗
93. W. Hoffelmer and R.B. Scarlin: in Fatigue 84, C.J. Reevers, ed., EMAS, West Midlands, 1984, vol. 111, pp. 1647–58.
94. W. Hoffelner and P. Gudmundson: Eng. Fract. Mech., 1982, vol. 15, pp. 365–71.10.1016/0013-7944(82)90114-X ↗
95. A.F. Blom, J. Backlund, and L. Jilken: Proc. Int. Conf. Fatigue Thresholds, Stockholm, 1981, vol. I, J. Bäcklund, A.F. Blom, and C.J. Beevers, eds., EMAS, West Midlands, U.K., pp. 133–52.
96. J. Byrne and T.V. Duggan: Proc. Int. Conf. Fatigue Thresholds, Stockholm, 1981, vol. 2, J. Bäcklund, A.F. Blom, and C.J. Beevers, eds., EMAS, West Midlands, U.K., pp. 759–76.
97. J.L. Yuen and P. Roy: in Fatigue Crack Growth Threshold Concept, D.L. Davidson and S. Suresh, eds., TMS, Warrendale, PA, 1984, pp. 185–203.
98. K.R. Garr and G.C. Hresko III: Fatigue Crack Grwoth Thresholds Endurance Limits, and Design, ASTM STP-1372, J.C. Newman, Jr. and R.S. Piascik, eds., ASTM, West Conshohocken, PA, 2000, pp. 155–74.10.1520/STP13432S ↗
99. D.L. Davidson and J. Lankford: Fat. Eng. Mater. Struct., 1984, vol. 7, pp. 29–39.10.1111/j.1460-2695.1984.tb00357.x ↗
100. A.K. Vasudevan, K. Sadananda, and K. Rajan: Int. J. Fatigue, 1997, vol. 19, pp. S151–S159.10.1016/S0142-1123(97)00027-3 ↗