Evaluation of Friction Coefficient by Simulation in Bulk Metal Forming Process
Source abstract
Abstract
With the objective of evaluating the accuracy of the upper-bound theory for calculating the average Tresca friction coefficient m in the hot forging process, we performed simulations using different values of m in each compression process to high strain levels. It was found that the upper-bound theory is not applicable at high strain levels, because the contact surface of the cylindrical sample is composed of an originally flat end surface and the annular portion formed by the contact of the lateral surface with the anvil surface. The relation among \( P = {\frac{{Rm H}}{{Rt H0 }}}, \) true strain, and m could be expressed by \( \left( {a\prime + a\prime\prime\varepsilon + a\prime\prime\prime\varepsilon2 - P} \right) + \left( {b\prime + b\prime\prime\varepsilon + b\prime\prime\prime\varepsilon2 } \right)m\,+ \left( {c\prime\prime\varepsilon + c\prime\prime\prime\varepsilon2 } \right)m2 = 0. \) Here, the m values obtained were in good agreement with the actual ones used in the simulations. The value of m of the arbitrary geometry cylindrical sample could also be directly read from a contour map with a relationship among nominal strain, parameter B of the corresponding standard sample, and m.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (20)
Show source-provided references
1. N. Frederiksen and T. Wanheim: J. Mech. Work. Technol., 1985, vol. 12, pp. 261–68.10.1016/0378-3804(85)90141-X ↗
2. N. Bay: J. Mech. Work. Technol., 1987, vol. 14, pp. 203–23.10.1016/0378-3804(87)90061-1 ↗
3. A.T. Male and V. Depierre: J. Lubr. Technol., 1970, vol. 92, pp. 389–97.10.1115/1.3451419 ↗
4. S. Venugopal, G. Srinivasan, S. Venkadesoan, and V. Seetharaman: J. Mech. Work. Technol., 1989, vol. 19, pp. 261–66.10.1016/0378-3804(89)90009-0 ↗
5. G. Shen, V. Vedhanayagam, E. Kropp, and T. Altan: J. Mater. Process Technol., 1992, vol. 33, pp. 109–23.10.1016/0924-0136(92)90314-I ↗
6. A. Bushhausen, K. Weinmann, J.Y. Lee, and T. Altan: J. Mater. Process. Technol., 1992, vol. 33, pp. 95–108.10.1016/0924-0136(92)90313-H ↗
7. N. Bay, J. Hunding, K. Kuzman, and E. Pfeifer: Proc. 5th Int. Conf. on Technology of Plasticity, Columbus, OH, 1996, pp. 311–18.
8. R. Ebrahimi and A. Najafizadeh: J. Mater. Proc. Technol., 2004, vol. 152, pp. 136–43.10.1016/j.jmatprotec.2004.03.029 ↗
9. R. Ebrahimi, A. Najafizadeh, and R. Shateri: Proc. Steel Symp. 81, Iranian Institute for Iron and Steel, Isphahan, Iran, Mar. 2–3, 2003, pp. 230–37.
10. Y. Li, E. Onodera, H. Matsumoto, and A. Chiba: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 982–90.10.1007/s11661-009-9783-7 ↗
11. Y. Li, H. Matsumoto, and A. Chiba: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1203–09.10.1007/s11661-009-9811-7 ↗
12. Y. Li, E. Onodera, H. Matsumoto, and A. Chiba: unpublished research, 2009.
13. B. Avitzur and R.A. Kohser: ASME J. Eng. Ind., 1978, vol. 100, pp. 421–33.10.1115/1.3439456 ↗
14. T. Thore and E. Felder: J. Mech. Work. Technol., 1986, vol. 13, pp. 51–64.10.1016/0378-3804(86)90042-2 ↗
15. K. Phlandt and T. Oberlnder: J. Mater. Proc. Technol., 1992, vol. 34, pp. 187–94.10.1016/0924-0136(92)90106-3 ↗
16. H. Monajati, M. Jahazi, S. Yue, and A.K. Taheri: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 895–905.10.1007/s11661-005-0284-z ↗
17. G.E. Dieter: Mechanical Metallurgy, 3rd ed., McGraw Hill Book Co., New York, NY, 1986, p. 539.
18. S.I. Oh, S.L. Semiatin, and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 963–75.10.1007/BF02675571 ↗
19. P. Daras and J.F. Thomas: Metall. Trans. A, 1981, vol. 12A, pp. 1867–76.10.1007/BF02643797 ↗
20. C.C. Chen: “Evaluation of Lubrication Systems for Isothermal Forging of Alpha-Beta Titanium Alloys,” AFML-Tr-77-181, AFWAL Materials Laboratory, WP-AFB, OH 1977.10.21236/ADA055655 ↗