journal article·2014-05

Hot Extrusion of A356 Aluminum Metal Matrix Composite with Carbon Nanotube/Al2O3 Hybrid Reinforcement

H. H. Kim, J. S. S. Babu, C. G. Kang

Publisher page

Abstract

Over the years, the attention of material scientists and engineers has shifted from conventional composite materials to nanocomposite materials for the development of light weight and high-performance devices. Since the discovery of carbon nanotubes (CNTs), many researchers have tried to fabricate metal matrix composites (MMCs) with CNT reinforcements. However, CNTs exhibit low dispersibility in metal melts owing to their poor wettability and large surface-to-volume ratio. The use of an array of short fibers or hybrid reinforcements in a preform could overcome this problem and enhance the dispersion of CNTs in the matrix. In this study, multi-walled CNT/Al2O3 preform-based aluminum hybrid composites were fabricated using the infiltration method. Then, the composites were extruded to evaluate changes in its mechanical properties. In addition, the dispersion of reinforcements was investigated using a hardness test. The required extrusion pressure of hybrid MMCs increased as the Al2O3/CNT fraction increased. The deformation resistance of hybrid material was over two times that of the original A356 aluminum alloy material due to strengthening by the Al2O3/CNTs reinforcements. In addition, an unusual trend was detected; primary transition was induced by the hybrid reinforcements, as can be observed in the pressure–displacement curve. Increasing temperature of the material can help increase formability. In particular, temperatures under 623 K (350 °C) and over-incorporating reinforcements (Al2O3 20 pct, CNTs 3 pct) are not recommended owing to a significant increase in the brittleness of the hybrid material.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Electromagnetic wave absorption materials

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. V.K. Lindroos and M.J. Talvitie: J.Mater. Process. Technol.,1995, vol. 53, pp. 273-284.10.1016/0924-0136(95)01985-N ↗
2. Z.Y.Hai and Y.L.Xing: J. Mater. Sci., 2004, vol. 39, pp. 6153-6171.10.1023/B:JMSC.0000043583.47148.31 ↗
3. D.B.Miracle: Compos. Sci. Technol., 2005, vol.65, pp. 2526-2540.10.1016/j.compscitech.2005.05.027 ↗
4. S. IIjima: Nature, 1991, vol. 354, pp. 56–58.10.1038/354056a0 ↗
5. M. M. J. Treacy, T. W. Ebbesen, J. M. Gibson: Nature, 1996, vol. 381, pp. 678-680.10.1038/381678a0 ↗
6. A Krishnan, E. Dujardin, T. W. Ebbesen, P. N. Yianilos, M. M. J. Treacy: Phys. Rev. B, 1998, vol. 58B (20), pp. 14013-14019.10.1103/PhysRevB.58.14013 ↗
7. E. W. Wong, P. E. Sheehan, C. M. Lieber: Science, 1997, vol. 277, pp. 1971-1974.10.1126/science.277.5334.1971 ↗
8. M. F. Yu, B. S. Files, S. Arepalli, R. S. Ruoff: Phys. Rev.Lett., 2000, vol. 84 (24), pp.5552-5555.10.1103/PhysRevLett.84.5552 ↗
9. M. F. Yu, O. Laurie, M. J. Dyer, K. Moloni, T. F. Kelly, R. S.Ruoff: Science, 2000, vol. 287, pp. 637-640.10.1126/science.287.5453.637 ↗
10. Katsuyoshi Kondoh, Hiroyuki Fukuda, Junko Umeda, Hisashi Imai, Bunshi Fugetsu, Morinobu Endo: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4103-4108.10.1016/j.msea.2010.03.049 ↗
11. T. Kuzumaki, K. Miyazawa, H. Ichinose and K. Ito: J. Mater. Res., 1998, vol. 13 (9), pp. 2445–2449.10.1557/JMR.1998.0340 ↗
12. R. Zhong, H. Cong and P. Hou: Carbon, 2003, vol. 41, pp. 848–851.10.1016/S0008-6223(02)00427-X ↗
13. A. M. K. Esawi and M. A. E. Borady: Compos. Sci. Technol., 2008, vol. 68, pp. 486–492.10.1016/j.compscitech.2007.06.030 ↗
14. S.M. Zhou, X.B. Zhang, Z.P. Ding, C.Y. Min, G.L. Xu, and W.-M. Zhu: Compos. A, 2007, vol. 38A, pp. 301–306.10.1016/j.compositesa.2006.04.004 ↗
15. H. Uozumi, K. Kobayashi, K. Nakanishi, T. Matsunaga, K. Shinozaki, H. Sakamoto, T. Tsukada, C. Masuda and M. Yoshida: Mater. Sci. Eng. A, 2008, vol. A495, pp. 282–287.10.1016/j.msea.2007.11.088 ↗
16. S. C. Okumus, S. Aslan, R. Karslioglu, D. Gultekin, H. Akbulut: Mater. Sci, 2012, vol. 18, pp. 341-346.
17. Z.M. Du, J.P. Li: J.Mater. Process. Technol., 2004, vol. 151, pp. 298-301.10.1016/j.jmatprotec.2004.04.077 ↗
18. J. Vandermeer: U.S Patent No. 6214102, 2001.
19. C.G.Kang, G.S.Ku: J. Compos. Mater., 1995, vol. 29, pp. 444-462.10.1177/002199839502900402 ↗
20. T.-Q. Li and L. Odberg: Colloids Surf. A, 2001, vol. 115, pp. 127–135.10.1016/0927-7757(96)03600-X ↗
21. P.K. Saha: Aluminum Extrusion Technology, 2000, ASM International, Materials Park.10.31399/asm.tb.aet.9781627083362 ↗
22. A.F. Castle and T. Sheppard: Met. Technol., 1976, vol. 3(10), p. 42.10.1179/030716976803391908 ↗
23. A.F. Castle: Proc. Fifth Int. Alum. Extrus. Technol. Semin., Aluminum Extruders Council and the Aluminum Associations, Inc, 1992.
24. H.J. Choi, G.B. Kwon, D.H. Bae: Scripta Mater., 2008, vol. 59, pp. 360-363.10.1016/j.scriptamat.2008.04.006 ↗
25. H. Li, A. Mirsra, Y. Zhu, Z. Horta, C.C. Koch, T.G. Holesingerd: Mater. Sci. Eng. A, 2009, vol. 523, pp 60-64.10.1016/j.msea.2009.05.031 ↗
26. K.M. Liew, X.Q. He, C.H. Wong: Acta Materialia, 2004, vol.52, pp. 2521-2527.10.1016/j.actamat.2004.01.043 ↗
27. R. George, K.T. Kashyap, R. Rahul, and S. Yamdagni: Scripta Mater., 2005, vol. 53, pp. 1159–63.10.1016/j.scriptamat.2005.07.022 ↗
28. W. D. Callister, Jr.: Materials science and engineering an introduction, 3rd ed., John Wiley & Sons, Inc. New York, 2003, pp. 175.
29. M. Zhao, Y. Liu, L. Chen, and J. Bi: J. Mater. Sci. Technol., 2004,Vol.20 (4), pp.451-453.