journal article·2009-04

Textures in Single-Crystal Aluminum Friction Stir Spot Welds

Toshiya Shibayanagi, Adrian P. Gerlich, Keizo Kashihara, Thomas H. North

Publisher page

Abstract

The present article examines the textural features produced during friction stir spot welding of single-crystal aluminum sheet. The crystal has the {111} plane perpendicular to the normal direction (ND) of the sheet, and the $$ \left\langle { 1 10} \right\rangle $$ direction parallel to the growth direction (GD). Friction stir spot welding was carried out using a rotation speed of 1500 rpm and a dwell time of 2 seconds, and completed spot welds were characterized using a combination of optical microscopy and electron backscatter diffraction (EBSD). The EBSD measurements indicate there are no significant changes in orientation in locations more than 840 μm from the stir-zone extremity. The orientation distribution in the thermomechanically-affected zone (TMAZ) region conformed with the {110}⊥ND orientation within 580 μm of the stir-zone extremity. In the location immediately adjacent to the stir-zone extremity, there was a deviation from the {110}//ND orientation due to a combination of compressive loading perpendicular to the stir-zone boundary and shear loading in the direction of tool rotation. It is suggested a {111}⊥ND texture in the stir zone is associated with material flow imposed by the thread on the rotating pin.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. E.O. Hall: Proc. Phys. Soc. London, 1951, vol. B64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
2. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
3. U.F. Kocks: Texture and Anisotropy, Cambridge University Press, Cambridge, UK, 1998, pp. 183–203.
4. M. Hasegawa and H. Fukutomi: Mater. Trans., 2002, vol. 43, pp. 2243–48.10.2320/matertrans.43.2243 ↗
5. R.W.K. Honeycombe: The Plastic Deformation of Metals, Edward Arnold Publishers, London, UK, 1984, p. 28.
6. G. Winther, L. Margulies, S. Schmidt, and H.F. Poulsen: Acta Mater., 2004, vol. 52, pp. 2863–72.10.1016/j.actamat.2004.02.045 ↗
7. V. Randle and O. Engler: Introduction to Texture Analysis: Macrotexture, Microtexture and Orientation Mapping, Gordon & Breach, Amsterdam, 2000, pp. 134–86.10.1201/9781482287479 ↗
8. O. Engler, L. Lochte, and J. Hirsch: Acta Mater., 2007, vol. 55, pp. 5449–63.10.1016/j.actamat.2007.06.010 ↗
9. K. Matsumoto, T. Shibayanagi, and Y. Umakoshi: Acta Mater., 1997, vol. 54, pp. 431–5l.
10. R. Mishra and Z.Y. Ma: Mater. Sci. Eng., 2005, vol. R50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
11. J.C. Bersaas, A. Oosterkamp, and L.D. Oosterkamp: World Patent No. WO 01/28732A1, 2001.
12. J.-Q. Su, T.W. Nelson, R. Mishra, and M. Mahoney, Acta Mater., 2003, vol. 51, pp. 713–29.10.1016/S1359-6454(02)00449-4 ↗
13. K.N. Krishnan: Mater. Sci. Eng., 2002, vol. A327, pp. 246–51.10.1016/S0921-5093(01)01474-5 ↗
14. Y.S. Sato, H. Kokawa, M. Enomoto, and S. Jogan: Metall. Mater. Trans. A, 1999, vol. 30A pp. 2429–37.10.1007/s11661-999-0251-1 ↗
15. R.W. Fonda and J.F. Bingert: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1478–99.
16. R. Zettler, J. dos Santos, T. Donath, M. Beckmann, and D. Lohwasser: Proc. 6th Int. Symp. on Friction Stir Welding, Cambridge, 2007, TWI Ltd., Abington, United Kingdom.
17. J.A. Schneider and A.C. Nunes: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 777–83.10.1007/s11663-004-0018-4 ↗
18. G. Biallas, R. Braun, C. Dalle Donne, G. Staniek, and W.A. Kaysser: Proc. 1st Int. Symp. on Friction Stir Welding, Cambridge, 1999, TWI Ltd., Abington, United Kingdom.
19. P. Colegrove and H.R. Shercliff: Sci. Technol. Weld. Join., 2004, vol. 9, pp. 483–93.10.1179/136217104225021832 ↗
20. M.J. Peel, A. Steuwer, P.J. Withers, T. Dickerson, Q. Shi, and H. Shercliff: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2183–93.10.1007/BF02586138 ↗
21. T. Jene, G. Dobman, G. Wagner, and D. Eifler: Proc. 6th Int. Symp. on Friction Stir Welding, Cambridge, 2007, TWI Ltd., Abington, United Kingdom.
22. M.M. Allatalah, C.L. Davis, and M. Strangwood: Proc. 6th Int. Symp. on Friction Stir Welding, Cambridge, 2007, TWI Ltd., Abington, United Kingdom.
23. J.A. Schneider and A.C. Nunes: Metall. Mater. Trans. B, 2004, vol. 35B, pp. 777–83.10.1007/s11663-004-0018-4 ↗
24. Y.S. Sato, H. Kokawa, K. Ikeda, M. Enomoto, S. Jogan, and T. Hashimoto: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 941–48.10.1007/s11661-001-0351-z ↗
25. D.P. Field, T.W. Nelson, Y. Hovanski, and K.V. Jata: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2869–77.10.1007/s11661-001-1037-2 ↗
26. D.P. Field and T.W. Nelson: Mater. Sci. Forum, 2002, vols. 408–412, pp. 1507–12.10.4028/www.scientific.net/MSF.408-412.1507 ↗
27. H. Jin, C. Ko, S. Saimoto, and P.L. Threadgill: Mater. Sci. Forum, 2000, vols. 331–337, pp. 1725–30.10.4028/www.scientific.net/MSF.331-337.1725 ↗
28. J.L. Pouchou, D. Boivin, Y. Renollet, and C. Gallais: Michochimica Acta, 2004, vol. 145, pp. 171–76.10.1007/s00604-003-0148-4 ↗
29. S.H. Kang, W.H. Bang, J.H. Cho, H.N. Han, K.H. Oh, C.G. Lee, and S.-J. Kim: Mater. Sci. Forum, 2005, vols. 495–497, pp. 901–06.10.4028/0-87849-975-x.901 ↗
30. R.W. Fonda, J.F. Bingert, and K.J. Colligan: Scripta Mater., 2004, vol. 51, pp. 243–48.10.1016/j.scriptamat.2004.04.017 ↗
31. R.W. Fonda, J.A. Wert, A.P. Reynolds, and W.Tang: Sci. Technol. Weld. Join., 2007, vol. 12, pp. 304–10.10.1179/174329307X197557 ↗
32. P.B. Prangnell and C.P. Heason: Acta Mater., 2005, vol. 53, pp. 3179–92.10.1016/j.actamat.2005.03.044 ↗
33. W. Woo, H. Choo, D.W. Brown, P.K. Iaw, and Z. Feng: Scripta Mater., 2006, vol. 54, pp. 1859–65.10.1016/j.scriptamat.2006.02.019 ↗
34. W. Woo, H. Choo, D.W. Brown, S.C. Vogel, P.K. Liaw, and Z. Feng: Acta Mater., 2006, vol. 54, pp. 3871–82.10.1016/j.actamat.2006.04.018 ↗
35. Y.N. Wang, C.I. Chang, C.J. Lee, H.K. Lin, and J.C. Huang: Scripta Mater., 2006, vol. 55, pp. 637–40.10.1016/j.scriptamat.2006.06.005 ↗
36. A.P. Reynolds, E. Hood, and W. Tang: Scripta Mater. 2005, vol. 52, pp. 491–94.10.1016/j.scriptamat.2004.11.009 ↗
37. D.T. Zhang, M. Suzuki, and K. Maruyama: Acta Metall. Sinica, 2006, vol. 19, pp. 335–40.10.1016/S1006-7191(06)62070-X ↗
38. S. Hwan, C. Park, Y.S. Sato, and H. Kokawa: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 987–94.
39. O. Engler, X.W. Kong, and K. Lucke: Acta Mater., 2001, vol. 49, pp. 1701–15.10.1016/S1359-6454(01)00087-8 ↗
40. A. Gerlich, G.A. Cingara, and T.H. North: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2773–86.10.1007/BF02586110 ↗
41. M. Yamamoto, A. Gelrich, and T.H. North: J. Mater. Sci., 2007, vol. 42, pp. 7657–66.10.1007/s10853-007-1662-2 ↗
42. P. Su, A. Gerlich, T.H. North, and G.J. Bendzsak: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 584–95.10.1007/s11661-006-9067-4 ↗
43. M. Yamamoto, A. Gerlich, T.H. North, and K. Shinozaki: Sci. Technol. Weld. Join., 2008, vol. 13, no. 7, pp. 583–92.10.1179/174329308X349520 ↗
44. A. Gerlich, M. Yamamoto, T. Shibayanagi, and T.H. North: SAE Techn. Ser., 2008, No. 2008-01-0146.
45. P. Su, A. Gerlich, and T.H. North: SAE Techn. Ser., 2006, No. 2006-01-0971.
46. A. Gerlich, P. Su, and T.H. North: J. Mater. Sci., 2005, vol. 40, pp. 6473–81.10.1007/s10853-005-1568-9 ↗
47. M. Yamamoto, P. Su, A. Gerlich, and T. North: SAE Techn. Ser., 2007, No. 2007-01-1700.
48. P. Heurtier, M.J. Jones, C. Desrayaud, J.H. Driver, F. Montheillet, and D. Allehaux: J. Mater. Process. Technol., 2006, vol. 171, pp. 348–57.10.1016/j.jmatprotec.2005.07.014 ↗
49. P. Su, A. Gerlich, T.H. North, and G.J. Bendzsak: Sci. Technol. Weld. Join., 2006, vol. 11, pp. 163–69.10.1179/174329306X84373 ↗
50. A.P. Gerlich: Ph.D. Thesis, University of Toronto, Toronto, Canada, 2007.
51. M.E. Kassner, R.D. Doherty, D.A. Hughes, F.J. Humphreys, J.J. Jonas, D.J. Jensen, W.E. King, T.R. McNelley, H.J. McQueen, and A.D. Rollett: Mater. Sci. Eng. A, 1997, vol. 238, pp. 219–74.10.1016/S0921-5093(97)00424-3 ↗
52. G.R. Canova, U.F. Kocks, and J.J. Jonas: Acta Metall., 1984, vol. 32, pp. 211–26.10.1016/0001-6160(84)90050-6 ↗