The microstructure of an Fe-Mn-Si-Cr-Ni stainless steel shape memory alloy
Source abstract
Abstract
The microstructure and phase stability of the Fe-15Mn-7Si-9Cr-5Ni stainless steel shape memory alloy in the temperature range of 600 °C to 1200 °C was investigated using optical and transmission electron microscopy, X-ray diffractometry (XRD), differential scanning calorimetry (DSC), and chemical analysis techniques. The microstructural studies show that an austenite single-phase field exists in the temperature range of 1000 °C to 1100 °C, above 1100 °C, there exists a three-phase field consisting of austenite, δ-ferrite, and the (Fe,Mn)3Si intermetallic phase; within the temperature range of 700 °C to 1000 °C, a two-phase field consisting of austenite and the Fe5Ni3Si2 type intermetallic phase exists; and below 700 °C, there exists a single austenite phase field. Apart from these equilibrium phases, the austenite grains show the presence of athermal ɛ martensite. The athermal α′ martensite has also been observed for the first time in these stainless steel shape memory alloys and is produced through the γ-ɛ-α′ transformation sequence.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Shape Memory Alloy Transformations · Microstructure and Mechanical Properties of Steels · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (27)
Show source-provided references
1. J.S. Robinson and P.G. McCormick: Mater. Sci. Forum, 1990, vols. 56–58, pp. 649–54.10.4028/www.scientific.net/MSF.56-58.649 ↗
2. X.X. Wang and L.C. Zhao: Scripta Metall. Mater., 1992, vol. 26, pp. 303–07.10.1016/0956-716X(92)90191-G ↗
3. H. Inagaki: Z. MetallKd., 1992, vol. 83, pp. 90–96.
4. A. Sato, E. Chishima, and T. Mori: Acta Metall., 1984, vol. 32 (4), pp. 539–47.10.1016/0001-6160(84)90065-8 ↗
5. J.H. Yang, H. Chen, and C.M. Wayman: Metall. Trans. A, 1992, vol. 23, pp. 1431–37.10.1007/BF02647326 ↗
6. H. Li, D. Dunne, and N. Kennon: Mater. Sci. Eng. A, 1999, vol. 273–275, pp. 517–23.10.1016/S0921-5093(99)00391-3 ↗
7. D.F. Wang, Y.R. Chen, F.Y. Gong, D.Z. Liu, and W.X. Liu: J. Phys. IV, 1995, vol. 5, pp. C8-527–C8-530.
8. M. Andersson and J. Agren: J. Phys. IV, 1995, vol. 5, pp. C8-457–C8-462.
9. D.P. Dunne and H. Li: J. Phys. IV, 1995, vol. 5, pp. C8-415–C8-420.
10. J.H. Yang and C.M. Wayman: Metall. Trans. A, 1992, vol. 23A, pp. 1445–54.10.1007/BF02647328 ↗
11. J.H. Yang, H. Chen, and C.M. Wayman: Metall. Trans. A, 1992, vol. 23, pp. 1439–44.10.1007/BF02647327 ↗
12. G. Kurdjumov and G. Sachs: Z. Phys., 1930, vol. 64, p. 325.10.1007/BF01397346 ↗
13. G.C. Weatherly, P. Humble, and D. Borland: Acta Metall., 1979, vol. 27, pp. 1815–28.10.1016/0001-6160(79)90072-5 ↗
14. V.H. Warlimont: Z. Metallkd., 1968, vol. 59, pp. 595–602.
15. P. Villars and L.D. Calvert: in Pearson’s Hand Book of Crystallographic Data for Intermetallic Phases, 2nd ed., ASM, Metals Park, OH, 1986, vol. 3, p. 2191.
16. F.B. Pickering: Physical Metallurgy and the Design of Steels, Applied Science Publishers Ltd., London, 1978, p. 226.
17. P. Villars and L.D. Calvert: Pearson’s Hand Book of Crystallographic Data for Intermetallic Phases, 2nd ed., ASM, Metals Park, OH, 1986, vol. 3, p. 2207.
18. E.I. Gladysherskii, P.I. Kripyakevich, and Y.B. Kuz’ma: J. Strl. Chem., 1962, vol. 3, pp. 402–10.10.1007/BF00744082 ↗
19. Y. Hashino, S. Nakamura, N. Ishikawa, Y. Yamaji, S. Matsumoto, Y. Tanaka, and A. Sato: Mater. Trans., JIM, 1992, vol. 33 (2), pp. 253–62.10.2320/matertrans1989.33.253 ↗
20. E. Garstein and A. Rabinkin: Acta. Metall., 1979, vol. 27, pp. 1053–64.10.1016/0001-6160(79)90193-7 ↗
21. A.P. Gulyaev, T.F. Volynova, and I.Y. Georgieva: Mater. Sci. Heat Treatment, 1978, vol. 20, p. 179.10.1007/BF00777087 ↗
22. Y. Tomota and K. Yamaguchi: J. Phys. III, 1995, vol. 5, pp. C8-421–C8-426.
23. Y.E.N. Babanova, F.A. Sidorenko, P.V. Gel’d, and N.I. Basov: Phys. Met. Metallogr. 1974, vol. 38 (3), pp. 122–26.
24. T. Bouraoui, A. Van Neste, and B. Dubois: J. Phys. III, 1995, vol. 5, pp. C8-403–C8-408.
25. P. Villers, A. Prience, and H. Okamoto: Handbook of Ternary Alloy Phase Diagrams, 1st ed., ASM, Materials Park, OH, 1995, vol. 3, pp. 10631–10641.
26. P. Villers, A. Prience, and H. Okamoto: Handbook of Ternary Alloy Phase Diagram, 1st ed., ASM, Metals Park, OH, 1995, vol. 3, pp. 9147–49.
27. P. Villers, A. Prience, and H. Okamoto: Handbook of Ternary Alloy Phase Diagram, 1st ed., ASM, Metals Park, OH, 1995, vol. 3, pp. 10427–10438.