Influence of Process Conditions on the Local Solidification and Microstructure During Laser Metal Deposition of an Intermetallic TiAl Alloy (GE4822)
Source abstract
Abstract
Abstract Temperature-time cycles are essential for the formation of microstructures and thus the mechanical properties of materials. In additive manufacturing, components undergo changing temperature regimes because of the track- and layer-wise build-up. Because of the high brittleness of titanium aluminides, preheating is used to prevent cracking. This also effects the thermal history. In the present study, local solidification conditions during the additive manufacturing process of Ti-48Al-2Cr-2Nb with laser metal deposition (LMD) are investigated by both simulation and experimental investigations. Dependencies of the build-up height, preheating temperatures, process parameters and effects on the resulting microstructure are considered, including the heat treatment. Solidification conditions are found to be dependent on the build height and thus actual preheating temperature, process parameters and location in the melt pool. Influences on both chemical composition and microstructure are observed. Resulting differences can almost be balanced through post heat treatment.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Intermetallics and Advanced Alloy Properties · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. S. F. Clark, 787 Propulsion System. (Boeing Aero, 2012), https://www.boeing.com/commercial/aeromagazine/articles/2012_q3/2/. Accessed 26 Aug 2019
2. Motor Presse Stuttgart GmbH & Co. KG, MTU entwickelt neuen Werkstoff für Turbinenschaufeln (2015), https://www.flugrevue.de/flugzeugbau/titanaluminid-mtu-entwickelt-neuen-werkstoff-fuer-turbinenschaufeln/. Accessed 26 August 2019
3. GfE Metalle und Materialien GmbH, TiAl48-2-2 (2017), https://www.gfe.com/produktbereiche/titanaluminide/produktuebersicht/. Accessed 10 Dec 2020
4. [4] Y. Du, J. Shen, Y. Xiong, Z. Shang, H. Fu: Intermetallics, 2015, vol. 61, pp. 80-410.1016/j.intermet.2015.02.018 ↗
5. [5] V. Tebaldo, M.G. Faga: J. Mater. Process. Technol., 2017, vol. 244, pp. 289-30310.1016/j.jmatprotec.2017.01.037 ↗
6. A. Penna: PhD thesis, Politecnico di Torino, Torino, 2013
7. G. Baudana, S. Biamino, D. Ugues, M. Lombardi, P. Fino, M. Pavese, C. Badini: Metal Powder Report, 2016, 3, 193-19910.1016/j.mprp.2016.02.058 ↗
8. S. Biamino, A. Penna, U. Ackelid, S. Sabbadini, O. Tassa, P. Fino, M. Pavese, P. Gennarao, C. Badini: Intermetallics, 2011, 6, 776-78110.1016/j.intermet.2010.11.017 ↗
9. [9] H.P. Tang, G.Y. Yang, W. P. Jia, W.W. He, S.L. Lu, M. Qian: Mater. Sci. Eng.: A, 2015, vol. 636, pp. 103-10710.1016/j.msea.2015.03.079 ↗
10. [10] S. Biamino, B. Klöden, T. Weißgärber, B. Kieback, U. Ackelid: World PM 2014, vol. 03, pp. 96-103
11. General Electric Company, Additive at Scale: Avio Aero Flies into the Future (2018), https://www.ge.com/additive/stories/additive-at-scale-avio-aero. Accessed Nov 16 2020
12. [12] M.S. Dahar, S.M. Seifi, B.P. Bewlay, J.J. Lewandowski: Intermetallics, 2015, vol. 57, pp. 73-8210.1016/j.intermet.2014.10.005 ↗
13. [13] W. Ge, C. Guo, F. Lin: Procedia Eng., 2014, vol. 81, pp. 1192-119710.1016/j.proeng.2014.10.096 ↗
14. [14] J. Gussone, Y.-C. Hagedorn, H. Gherekhloo, G. Kasperovich, T. Merzouk, J. Hausmann: Intermetallics, 2015, vol. 66, pp. 133-14010.1016/j.intermet.2015.07.005 ↗
15. L. Löber, F.P. Schimansky, U. Kühn, F. Pyczak, J. Eckert: J. Mater. Process. Technol. 2014, 9, 1852-186010.1016/j.jmatprotec.2014.04.002 ↗
16. A. Vogelpoth, J. H. Schleifenbaum, S.-K. Rittinghaus: Proc. ASME Turbo Expo, 2019, 6, 11
17. M. Thomas, T. Malot, P. Aubry: Metall. Trans. A, 2017, 193, 519-537
18. [18] S.-K. Rittinghaus, U. Hecht, V. Werner, A. Weisheit: Intermetallics, 2018, vol. 95, pp. 94-10110.1016/j.intermet.2018.02.002 ↗
19. [19] T. Vilaro, V. Kottman-Rexerodt, M. Thomas, C. Colin, P. Bertrand, L. Thivillon, S. Abed, V. Ji, P. Aubry, P. Peyre, T. Malot: AMR, 2010, vol. 89-91, pp. 586–59110.4028/www.scientific.net/AMR.89-91.586 ↗
20. C. Zhong, P. Pirch, A. Gasser, R. Poprawe, J. Schleifenbaum: Metals, 2017, 10, 443-156
21. J. Wilden, H. Frank, C. Theiler, T. Seefeld, G. Sepold: 47. Int. Wiss. Kolloquium, TU Ilmenau, Ilmenau, 2002, pp. 445–47
22. M. Charpentier, A. Hazotte, D. Daloz: Mater. Sci. Eng. A, 2008, 1-2, 321-33010.1016/j.msea.2008.02.009 ↗
23. [23] V. I. Rudnev, D. Loveless. Comprehensive Mater. Proc., 2014, vol.12, pp. 489-58010.1016/B978-0-08-096532-1.01217-6 ↗
24. [24] A. Klassen, V. E. Forster, V. Juechter, C. Körner: J. Mater. Process. Technol., 2017, vol. 247, pp. 280-28810.1016/j.jmatprotec.2017.04.016 ↗
25. [25] J. Schwerdtfeger, C. Körner: Intermetallics, 2014, vol. 49, pp. 29-3510.1016/j.intermet.2014.01.004 ↗
26. D. Hu, A. J. Huang, X. Wu: Intermetallics, 2007, 3, 327-33210.1016/j.intermet.2006.07.007 ↗
27. A. Bartels, S. Bystrzanowski, H. Chladil, H. Leitner, H. Clemens, R. Gerling, F.-P. Schimansky: MRS Proc., 2004, 842, 236910.1557/PROC-842-S5.48 ↗
28. U. Prasad, M. C. Chaturvedi: Metall. Trans. A, 2003, 10, 2053-206610.1007/s11661-003-0270-2 ↗
29. Q. Xia, J. N. Wang, J. Yang, Y. Wang: Intermetallics, 2001, 5, 361-36710.1016/S0966-9795(01)00017-6 ↗