Experimental Study of High Temperature Phase Equilibria in the Iron-Rich Part of the Fe-P and Fe-C-P Systems
Source abstract
Abstract
Abstract During the solidification of steel, phosphorus strongly segregates in the interdendritic liquid phase. In the continuous casting process, even low levels of P may have a detrimental effect on the final product quality. However, phosphorus is partly added up to 0.10 wt pct to improve the mechanical properties of advanced steel grades nowadays, e.g., High-Strength Interstitial-Free (HSIF). To provide new experimental data for the development of thermodynamic databases and solidification models for P alloyed steel grades, phase equilibria in the Fe-P and Fe-C-P key systems were studied up to 1550 °C using differential scanning calorimetry (DSC) and high temperature laser scanning confocal microscopy (HT-LSCM). Special focus was placed on solid/liquid equilibrium temperatures in the Fe-rich part of the binary Fe-P system between 0.025 and 9 wt pct P. In the ternary system, three isoplethal sections with 0.10 mass pct. P, 0.20 mass pct. C and constant mass percent ratio P/C of 2 were investigated. In the latter section, HT-LSCM observations were linked with DSC signals to optically identify present phase stabilities. Particularly at [pct P] < 1, significant differences between performed measurements and calculated phase equilibrium temperatures using thermodynamic assessments from the literature were identified. In all ternary sections, the experiments indicate less influence of P on the hypo-peritectic range compared to the thermodynamic calculations.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Metallurgical Processes and Thermodynamics · Microstructure and Mechanical Properties of Steels · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. [1] M. Wintz, M. Bobadilla and J. Jolivet, Rev. Metall., 1994, vol. 91, pp. 106–114.10.1051/metal/199491010105 ↗
2. [2] E. Schmidtmann and F. Rakoski, Arch. Eisenhuettenwes., 1983, vol. 54, pp. 357–362.
3. [3] M. Wolf and W. Kurz, Metall. Trans. B, 1981, vol. 12, pp. 85–93.10.1007/BF02674761 ↗
4. [4] H.G. Suzuki, S. Nishimura and Y. Nakamura, Trans. Iron Steel Inst. Jpn., 1984, vol. 24, pp. 54–59.10.2355/isijinternational1966.24.54 ↗
5. [5] X.-M. Chen, S.-H. Song, L.-Q. Weng, S.-J. Liu and K. Wang, Mater. Sci. Eng. A, 2011, vol. 528, pp. 8299–8304.10.1016/j.msea.2011.08.002 ↗
6. [6] M. Yamashita, H. Miyukia, Y. Matsudaa, H. Naganoa and T. Misawa, Corros. Sci., 1994, vol. 36, pp. 283-299.10.1016/0010-938X(94)90158-9 ↗
7. [7] M. Yamashita, H. Nagano, T. Misawa and H.E. Townsend, ISIJ Int., 1998, vol. 38, pp. 285-290.10.2355/isijinternational.38.285 ↗
8. [8] L. Barbé, K. Verbeken and E. Wettinck, ISIJ Int., 2006, vol. 46, pp. 1251–1257.10.2355/isijinternational.46.1251 ↗
9. [9] P. Presoly, R. Pierer and C. Bernhard, Metall. Mater. Trans. A, 2013, vol. 44, pp. 5377–5388.10.1007/s11661-013-1671-5 ↗
10. [10] P. Presoly, G. Xia, P. Reisinger and C. Bernhard, Berg- Huettenmaenn. Monatsh., 2014, vol. 159, pp. 430-437.10.1007/s00501-014-0306-5 ↗
11. [11] H. Okamoto, Bull. Alloy Phase Diagrams, 1990, vol. 11, pp. 404–412.10.1007/BF02843320 ↗
12. [12] W. Franke, K. Meisel and R. Juza, Z. Anorg. Chem., 1934, vol. 218, pp. 346-359.10.1002/zaac.19342180403 ↗
13. [13] K. Meisel, Z. Anorg. Chem., 1934, vol. 218, pp. 360-364.10.1002/zaac.19342180404 ↗
14. [14] M. Heimbrecht and W. Biltz, Z. Anorg. Chem., 1939, vol. 242, pp. 233-236.10.1002/zaac.19392420303 ↗
15. [15] W. Jeitschko and D. J. Braun, Acta Crystallogr. B, 1978, vol. 34, pp. 3196-3201.10.1107/S056774087801047X ↗
16. [16] B. Saklatwalla, J. Iron Steel Inst., 1908, vol. 77, pp. 92–103.
17. [17] N. Konstantinow, Z. Anorg. Chem., 1910, vol. 66, pp. 209–27.10.1002/zaac.19100660117 ↗
18. [18] J.L. Houghton, J. Iron Steel Inst., 1927, vol. 115, pp. 417-433.
19. [19] R. Vogel, Arch. Eisenhuettenw., 1929, vol. 3, pp. 369–381.
20. [20] E. Wachtel, G. Urbain and E. Übelacker, Compt. Rend., 1963, vol. 257, pp. 2470–2472.
21. [21] E. Schürmann, Arch. Eisenhuettenw., 1980, vol. 51, pp. 325-327.
22. [22] Z. I. Morita and T. Tanaka, Trans. Iron Steel Inst. Jpn., 1986, vol. 26, pp. 114–120.10.2355/isijinternational1966.26.114 ↗
23. [23] P. Roquet and G. Jegaden, Rev. Metall., 1951, vol. 48, pp. 712–721.10.1051/metal/195148090712 ↗
24. [24] K. Lorenz and H. Fabritius, Arch. Eisenhuettenw., 1962, vol. 33, pp. 269-275.
25. [25] W. A. Fischer, K. Lorenz, H. Fabritius, A. Hoffmann and G. Kalwa, Arch. Eisenhuettenw., 1966, vol. 37, pp. 79–86.
26. [26] H. Kaneko, T. Nishizawa, K. Tamaki and A. Tanifuji, J. Japan. Inst. Metals, 1965, vol. 29, pp. 166–170.10.2320/jinstmet1952.29.2_166 ↗
27. [27] A.S. Doan and J.I. Goldstein, Metall. Trans., 1970, vol. 1, pp. 1759–1767.10.1007/BF02642026 ↗
28. [28] H.P. Hofmann, K. Löhberg and W. Reif, Arch. Eisenhuettenw., 1970, vol. 41, pp. 975–982.
29. [29] M. Ko and T. Nishizawa, J. Jpn. Inst. Met., 1979, vol. 43, pp. 118–126.10.2320/jinstmet1952.43.2_118 ↗
30. [30] P. Spencer and O. Kubaschewski, Arch. Eisenhuettenwes., 1978, vol. 49, pp. 225–228.
31. P. Gustafson, Report IM-2549, Swedish Institute for Metals Research, Stockholm, Sweden, 1990.
32. [32] J.H. Shim, C.S. Oh and D.N. Lee, J. Korean Inst. Met. Mater., 1996, vol. 34, pp. 1385–1393.
33. [33] H. Ohtani, N. Hanaya, M. Hasebe, S.-I. Teraoka and M. Abe, Calphad, 2006, vol. 30, pp. 147–158.10.1016/j.calphad.2005.09.006 ↗
34. [34] T. Tokunaga, N. Hanaya, H. Ohtani and M. Hasebe, Mater. Sci. Forum, 2007, vol. 561-565, pp. 1899–1902.10.4028/www.scientific.net/MSF.561-565.1899 ↗
35. [35] Z.-M. Cao, K.-P. Wang, Z.-Y. Qiao and G.-W. Du, Acta Phys. Chim. Sin., 2012, vol. 28, pp. 37-43.10.3866/PKU.WHXB201111172 ↗
36. [36] J. Miettinen and G. Vassilev, Phase Equilib. Diffus. 2014, vol. 35, pp. 458–68.10.1007/s11669-014-0314-x ↗
37. P. Perrot, Landolt-Börnstein—Group IV Physical Chemistry Volume 11D2: “Iron Systems, Part 2”, Springer Materials, Springer, Berlin Heidelberg, 2008. https://doi.org/10.1007/978-3-540-74196-1_1110.1007/978-3-540-74196-1_11 ↗
38. E. Schürmann, U. Hensgen, and J. Schweinichen, Giessereiforschung, 1984, vol. 36, pp. 121–29.
39. [39] J.-H. Shim, C.-S. Oh and D.N. Lee, Z. Metallkd., 2000, vol. 91, pp. 114–120.
40. [40] P. Gustafson, Scand. J. Metall., 1985, vol. 14, pp. 259–267.
41. [41] G. W. Höhne, H. W. Hemminger and H. J. Flemmingheim, Differential Scanning Calorimetry: An Introduction to Practitioners, 1st edn. Springer, Berlin, 1996.10.1007/978-3-662-03302-9 ↗
42. W. J. Boettinger, U. R. Kattner, K.-W. Moon and J. H. Perepezko, DTA and Heat-flux DSC measurements of Alloy Melting and Freezing. NIST Recommended Practice Guide, Special Publication 960-15, 2006.10.6028/NBS.SP.960-15 ↗
43. [43] L. A. Chapman, J. Mater. Sci., 2004, vol. 39, pp. 7229–7236.10.1023/B:JMSC.0000048736.86794.12 ↗
44. Software: NETZSCH Tau-R Calibration 8.0.1 from Netzsch Gerätebau GmbH, Selb, Germany, 2019.
45. [45] E. Moukhina and E. Kaisersberger, Thermochim. Acta, 2009, vol. 492, pp. 101–109.10.1016/j.tca.2008.12.022 ↗
46. [46] W. J. Boettinger and U. R. Kattner, Metall. Mater. Trans. A, 2002, vol. 33, pp. 1779–1794.10.1007/s11661-002-0187-1 ↗
47. [47] M. Reid, D. Phelan and R. Dippenaar, ISIJ Int., 2004, vol. 44, pp. 565-572.10.2355/isijinternational.44.565 ↗
48. [48] C. Bernhard, S. Schider, A. Sormann, G. Xia and S. Ilie, Berg-Huettenmaenn. Monatsh., 2011, vol. 156, pp. 161-167.10.1007/s00501-011-0645-4 ↗
49. [49] S. Griesser and R. Dippenaar, ISIJ Int., 2014, vol. 54, pp. 533-535.10.2355/isijinternational.54.533 ↗
50. N. Fuchs, P. Krajewski and C. Bernhard, Berg-Huettenmaenn. Monatsh., 2015, vol. 160, pp. 214–20.10.1007/s00501-015-0356-3 ↗
51. [51] C.W. Bale, E. Bélisle, P. Chartrand, S.A. Decterov, G. Eriksson, A.E. Gheribi, K. Hack, I.-H. Jung, Y.-B. Kang, J. Melançon, A.D. Pelton, S. Petersen, C. Robelin, J. Sangster, P. Spencer and M.-A. van Ende, Calphad, 2016, vol. 54, pp. 35–53.10.1016/j.calphad.2016.05.002 ↗
52. [52] A. Grill and J. K. Brimacombe, Ironmak. Steelmak. 1976, vol. 3, pp. 76–79.
53. [53] Y. Maehara, K. Yasumoto, H. Tomono, T. Nagamichi and Y. Ohmori, Mater. Sci. Technol., 1990, vol. 6, pp. 793–806.10.1179/mst.1990.6.9.793 ↗
54. G. Xia, C. Bernhard, S. Ilie and C. Fürst, Proceedings of the 6th European Conference on Continuous Casting 2008, Riccione, Italy, 2008.
55. M. Bernhard, Y.-B. Kang, P. Presoly, A.E. Gheribi, and C. Bernhard, Calphad, 2020, vol. 70, 101795.10.1016/j.calphad.2020.101795 ↗