journal article·2020-01Open access

The Kinetics of Primary Alpha Plate Growth in Titanium Alloys

Abigail K. Ackerman, Alexander J. Knowles, Hazel M. Gardner, André A. N. Németh, Ioannis Bantounas, Anna Radecka, Michael P. Moody, Paul A. J. Bagot, Roger C. Reed, David Rugg, David Dye

Abstract

Abstract The kinetics of primary α-Ti colony/Widmanstätten plate growth from the β are examined in Ti-6246, comparing a simple quasi-analytic model to experiment. The plate growth velocity depends sensitively both on the diffusivity D(T) of the rate-limiting species and on the supersaturation around the growing plate. These result in a maxima in growth velocity around 40 K below the transus, once sufficient supersaturation is available to drive the plate growth. In Ti-6246, the plate growth velocity was found to be around 0.32 μm min−1 at 850 °C, which was in good agreement with the model prediction of 0.36 μm min−1. The solute field around the growing plates, and the plate thickness, was found to be quite variable, due to the intergrowth of plates and soft impingement. This solute field was found to extend to up to 30 nm, and the interface concentration in the β was found to be around 6.4 at. pct Mo. It was found that the increasing O content from 500 to 1500 wppm will have minimal effect on the plate lengths expected during continuous cooling; in contrast, Mo approximately doubles the plate lengths obtained for every 2 wt pct Mo reduction. Alloys using V as the β stabilizer instead of Mo are expected to have much faster plate growth kinetics at nominally equivalent V contents. These findings will provide a useful tool for the integrated design of alloys and process routes to achieve tailored microstructures.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced Materials Characterization Techniques · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (45)

Show source-provided references
1. J.C. Lütjering, G. Williams, Titanium (Springer, 2003)10.1007/978-3-540-71398-2 ↗
2. R. R. Boyer, Adv. Perform. Mater., 1995 vol. 2, pp. 349–368.10.1007/BF00705316 ↗
3. R. Boyer, E. Collings, G. E. Welsch, Material Properties Handbook: Titanium Alloys. ASM International, Cleveland, OH (1993)
4. J. Murray, Phase Diagrams of Binary Titanium Alloys, ASM International, Cleveland, OH (1990)
5. I. Weiss, S. Semiatin, Mater. Sci. Eng. A, 1999, vol. 263, pp. 243–256.10.1016/S0921-5093(98)01155-1 ↗
6. S. L. Semiatin, J. C. Soper, I. M. Sukonnik, Acta Metall., 1996, vol. 44, pp. 1979–1986.
7. J. Qiu, Y. Ma, J. Lei, Y. Liu, A. Huang, D. Rugg, R. Yang, Metall. Mater. Trans. A, 2014, vol. 45A, pp. 6075–6087.10.1007/s11661-014-2541-5 ↗
8. S.L. Semiatin, S.L.Knisley, P.N. Fagin, F. Zhang, D.R. Barker, Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2003–2377.
9. G. P. Ivantsov, Dokl. Akad. Nauk. SSSR, 1947, vol. 58, pp. 567–569.
10. G. Horvay, J. Cahn, Acta Metall., 1961, vol. 9, pp. 695–705.10.1016/0001-6160(61)90008-6 ↗
11. J. L. W. Warwick, N. G. Jones, I. Bantounas, M. Preuss, D. Dye, Acta Mater., 2013, vol. 61, pp. 1603–1615.10.1016/j.actamat.2012.11.037 ↗
12. N. Kherrouba, M. Bouabdallah, R. Badji, D. Carron, M. Amir, Mater. Chem. Phys., 2016, vol. 181, pp. 462–469.10.1016/j.matchemphys.2016.06.082 ↗
13. X. Gao, W. Zeng, S. Zhang, Q. Wang, Acta Mater., 2017, vol. 122, pp. 298–209.10.1016/j.actamat.2016.10.012 ↗
14. B. Appolaire, L. Héricher, E. Aeby-Gautier, Acta Mater., 2005, vol. 53, pp. 3001–3011.10.1016/j.actamat.2005.03.014 ↗
15. T. Ahmed, H. Rack, Mater. Sci. Eng. A, 243, 206-211 (1998)10.1016/S0921-5093(97)00802-2 ↗
16. G. Lütjering, Mater. Sci. Eng. A, 1998, vol. 243, pp. 32–45.10.1016/S0921-5093(97)00778-8 ↗
17. M. R. Plichta, H. Aaronson, Acta Metall., 1980, vol. 28, pp. 1041–1057.10.1016/0001-6160(80)90088-7 ↗
18. N. Stanford, P. Bate, Acta Mater., 2004, vol. 52, pp. 5215–5224.10.1016/j.actamat.2004.07.034 ↗
19. E. Lee, R. Banerjee, S. Kar, D. Bhattacharyya, H. L. Fraser, Philos. Mag., 2007, vol. 87, pp. 3615–2627.10.1080/14786430701373672 ↗
20. V. Tong, S. Joseph, A. K. Ackerman, D. Dye, T. B. Britton, J. Microsc., 2017, vol. 267, pp. 318–329.10.1111/jmi.12569 ↗
21. D. Bhattacharyya, G. Viswanathan, R. Denkenberger, D. Furrer, H. L. Fraser, Acta Mater., 2003, vol. 51, pp. 4679–4691.10.1016/S1359-6454(03)00179-4 ↗
22. T. Furuhara, T. Maki, Mater. Sci. Eng. A, 2001, vol. 312, pp. 145–154.10.1016/S0921-5093(00)01904-3 ↗
23. S. Joseph, I. Bantounas, T. C. Lindley, D. Dye, Int. J. Plast., 2018, vol. 100, pp. 90–103.10.1016/j.ijplas.2017.09.012 ↗
24. A. Radecka, P. A. Bagot, T. L. Martin, J. Coakley, V. A. Vorontsov, M. P. Moody, H. Ishii, D. Rugg, D. Dye, Acta Mater., 2016, vol. 112, pp. 141–149.10.1016/j.actamat.2016.03.080 ↗
25. J. Y. Lim, C. J. McMahon, D. P. Pope, J. C. Williams, Metall. Rev., 1976, vol. 7A, pp. 139–144.
26. T. Neeraj, M. J. Mills, Mater. Sci. Eng. A, 2001, vol. 319–321, pp. 415–419.10.1016/S0921-5093(01)01045-0 ↗
27. J. C. Williams, A. Sommer, P. Tung, Met. Trans., 1972, vol. 3, pp. 2979–2984.10.1007/BF02652870 ↗
28. T. P. Chapman, V. A. Vorontsov, A. Sankaran, D. Rugg, T. C. Lindley, D. Dye, Metall. Mater. Trans. A 47A, 282–292 (2016)10.1007/s11661-015-3181-0 ↗
29. C. Zener, J. Appl. Phys., 1949, vol. 20, pp. 950–953.10.1063/1.1698258 ↗
30. J. Christian, The Theory of Transformations in Metals and Alloys, Part I (Pergamon Press, 1975)
31. R. Trivedi, Metall. Trans., 1970, vol. 1, pp. 921–927.10.1007/BF02811774 ↗
32. W. Bosze, R. Trivedi, Acta Metall., 1975, vol. 23, pp. 713–722.10.1016/0001-6160(75)90054-1 ↗
33. Z.-K. Liu, Y. Austin Chang, J. Appl. Phys. 82, 4838–4841 (1997)10.1063/1.366344 ↗
34. H. B. Aaron, D. Fainstein, G. R. Kotler, J. Appl. Phys., 1970, vol. 41, pp. 4404–4410.10.1063/1.1658474 ↗
35. K. Thompson, D. Lawrence, D. J. Larson, J. D. Olson, T. F. Kelly, B. Gorman, Ultramicroscopy, 2007, vol. 107, pp. 131–139.10.1016/j.ultramic.2006.06.008 ↗
36. J. Mayer, L. A. Giannuzzi, T. Kamino, J. Michael, MRS Bull., 2007, vol. 32, pp. 400–407.10.1557/mrs2007.63 ↗
37. B. Gault, D. Haley, F. de Geuser, M. P. Moody, E. A. Marquis, D. J. Larson, B. P. Geiser, Ultramicroscopy, 2011, vol. 111, pp. 448–457.10.1016/j.ultramic.2010.11.016 ↗
38. A. Prasad, S. D. McDonald, H. Yasuda, K. Nogita, D. H. StJohn, J. Cryst. Growth, 2015, vol. 430, pp. 122–137.10.1016/j.jcrysgro.2015.06.024 ↗
39. Y. Xu, D. Casari, R. H. Mathiesen, Y. Li, Acta Mater., 2019, vol. 149, pp. 312–325.10.1016/j.actamat.2018.02.058 ↗
40. G. B. Gibbs, D. Graham, D. H. Tomlin, Philos. Mag., 1962, vol. 8, pp. 1269–1282.10.1080/14786436308207292 ↗
41. R. Elliot, Technical Report, Armour Research Foundation, Chicago, Illinois. AFRL report ASD-TDR-62-561, 1962
42. D. Williams,, Springer, , New York, 2 edition, 2009.10.1007/978-0-387-76501-3 ↗
43. Ø. Grong, H. Shercliff, Prog. Mater. Sci., 2002, vol. 47, pp. 163–282.10.1016/S0079-6425(00)00004-9 ↗
44. O. Myhr, Ø. Grong, Acta Metall. Mater., 1991, vol. 39, pp. 2693–2702.10.1016/0956-7151(91)90085-F ↗
45. J. J. Hoyt, Acta. Mater., 1993, vol. 61, pp. 4953–4960.10.1016/j.actamat.2013.04.051 ↗